{"title":"Brands","description":"\u003cp\u003eEvery part here is the genuine article, bought from the maker or its official trade channel, not a marketplace lookalike. I stock the brands serious 3D printer builders actually use, so you can get them from one shop in the Netherlands with EU VAT paid and no customs fees at the door.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003ca href=\"\/collections\/e3d\"\u003eE3D\u003c\/a\u003e: Revo hotends and nozzles, ObXidian and DiamondBack hotends for Bambu Lab\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/collections\/bigtreetech\"\u003eBIGTREETECH\u003c\/a\u003e: EBB36 toolhead boards, Manta M8P, TMC drivers\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/collections\/isiks-tech\"\u003eIsik's Tech\u003c\/a\u003e: Birds' Nest, ToqueCAN, AFC-Lite, Stealthmax PCBs\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/collections\/misumi\"\u003eMISUMI\u003c\/a\u003e: extrusions and hinges, cut to length for your build\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/collections\/delta-electronics\"\u003eDelta Electronics\u003c\/a\u003e and \u003ca href=\"\/collections\/adafruit\"\u003eAdafruit\u003c\/a\u003e: the fans and LEDs the toolhead BOMs call for\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eLooking for a part or brand that isn't listed? Mail me. I can often order it in with my next batch.\u003c\/p\u003e","products":[{"product_id":"doomcube-corner-extrusion-kit-misumi-4040-black-voron-2-4","title":"DoomCube Corner Extrusion Kit — MISUMI 4040, Black, Voron 2.4","description":"\u003cp\u003eThe four 4040 verticals that turn a Voron 2.4 frame into a DoomCube, ordered from MISUMI to the part numbers in the DoomCube-2 BOM. Pick your size and your corner style and I order the set for you.\u003c\/p\u003e\n\u003cp\u003eDoomCube swaps the 2020 verticals for 4040 so the panels sit off the frame with an air gap for insulation, moves the Z drives to the top and puts the mains electronics at the bottom. This kit is the extrusion part of that: the rest of your 2.4 frame stays as it is.\u003c\/p\u003e\n\u003ch3\u003eThree corner styles, straight from the BOM\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSquare, pre-drilled:\u003c\/strong\u003e MISUMI HFSB5-4040 with the LCP-RCP blind-joint counterbores machined by MISUMI. They replace your four 2020 verticals; no drilling at your bench.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSquare, DIY:\u003c\/strong\u003e the same HFSB5-4040 without machining, the BOM's DIY option. You drill the blind-joint holes yourself and save a fair bit.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRounded:\u003c\/strong\u003e MISUMI HFSR5-404020, the rounded-corner profile your existing 2020 verticals nest into. The 4040s need no machining; the 2020 verticals that nest into them need holes drilled, which you do yourself.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's in the box\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSize\u003c\/th\u003e\n\u003cth\u003eSquare, pre-drilled\u003c\/th\u003e\n\u003cth\u003eSquare, DIY\u003c\/th\u003e\n\u003cth\u003eRounded\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e250\u003c\/td\u003e\n\u003ctd\u003e4× HFSB5-4040-430-LCP-RCP\u003c\/td\u003e\n\u003ctd\u003e4× HFSB5-4040-430\u003c\/td\u003e\n\u003ctd\u003e4× HFSR5-404020-430\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e300\u003c\/td\u003e\n\u003ctd\u003e4× HFSB5-4040-480-LCP-RCP\u003c\/td\u003e\n\u003ctd\u003e4× HFSB5-4040-480\u003c\/td\u003e\n\u003ctd\u003e4× HFSR5-404020-480\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e350\u003c\/td\u003e\n\u003ctd\u003e4× HFSB5-4040-530-LCP-RCP\u003c\/td\u003e\n\u003ctd\u003e4× HFSB5-4040-530\u003c\/td\u003e\n\u003ctd\u003e4× HFSR5-404020-530\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003eBlack anodised. Blind-joint screws are not included. The new Z idlers and relocated endstop mounts DoomCube needs are printed parts from the DoomCube-2 repository.\u003c\/p\u003e\n\u003ch3\u003eLead time and shipping\u003c\/h3\u003e\n\u003cp\u003eMISUMI cuts and machines 4040 to order and quotes about two weeks for it, so count on two to three weeks before your set ships from the Netherlands. Slower than my printed parts, but it is the real part with the real machining. I'll mail you when it is on its way.\u003c\/p\u003e\n\u003cp\u003eFour 4040 bars weigh about 3 kg, so this kit ships as a PostNL parcel charged by weight at checkout; the free-shipping rule for my printed parts does not cover it.\u003c\/p\u003e\n\u003cp\u003eBuilding the doors too? The \u003ca href=\"\/products\/doomcube-door-extrusions-hinges-misumi-hfsb5-2020-black\"\u003eDoomCube Door Extrusions + Hinges kit\u003c\/a\u003e is cut from the same BOM. Need other MISUMI lengths, profiles or parts for your build? Mail me at \u003ca href=\"mailto:pjotr3dshop@gmail.com\"\u003epjotr3dshop@gmail.com\u003c\/a\u003e with the part numbers and I'll quote your order.\u003c\/p\u003e\n\u003chr\u003e\n\u003cp\u003eDesign: DoomCube-2 by FrankenVoron and the Voron community, published under GPLv3 at github.com\/FrankenVoron\/DoomCube-2. Extrusion by MISUMI. I source, check and pack the set; the design is theirs.\u003c\/p\u003e","brand":"MISUMI","offers":[{"title":"250 \/ Square, pre-drilled","offer_id":55004941025607,"sku":"VRN-DC-COR-250-SQ","price":169.95,"currency_code":"EUR","in_stock":true},{"title":"250 \/ Rounded","offer_id":55004941058375,"sku":"VRN-DC-COR-250-RD","price":79.95,"currency_code":"EUR","in_stock":true},{"title":"300 \/ Square, pre-drilled","offer_id":55004941091143,"sku":"VRN-DC-COR-300-SQ","price":179.95,"currency_code":"EUR","in_stock":true},{"title":"300 \/ Rounded","offer_id":55004941123911,"sku":"VRN-DC-COR-300-RD","price":84.95,"currency_code":"EUR","in_stock":true},{"title":"350 \/ Square, pre-drilled","offer_id":55004941156679,"sku":"VRN-DC-COR-350-SQ","price":189.95,"currency_code":"EUR","in_stock":true},{"title":"350 \/ Rounded","offer_id":55004941189447,"sku":"VRN-DC-COR-350-RD","price":89.95,"currency_code":"EUR","in_stock":true},{"title":"250 \/ Square, DIY","offer_id":55014278922567,"sku":"VRN-DC-COR-250-SQP","price":124.95,"currency_code":"EUR","in_stock":true},{"title":"300 \/ Square, DIY","offer_id":55014278955335,"sku":"VRN-DC-COR-300-SQP","price":129.95,"currency_code":"EUR","in_stock":true},{"title":"350 \/ Square, DIY","offer_id":55014278988103,"sku":"VRN-DC-COR-350-SQP","price":134.95,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0878\/0575\/5719\/files\/doomcube-corner-extrusion-kit-misumi-4040-black-voron-24-1952675.png?v=1789351453"},{"product_id":"doomcube-door-extrusions-hinges-misumi-hfsb5-2020-black","title":"DoomCube Door Extrusions + Hinges — MISUMI HFSB5-2020, Black","description":"\u003cp\u003eThe extrusions and hinges for DoomCube's framed front doors, in the BOM's pre-drilled version: two uprights with the blind-joint access holes machined by MISUMI, two rails tapped M5 both ends, plus two MISUMI HHPBSN5 black hinge sets. The frame goes together with four screws and no drilling. Pick your size and I order the set for you.\u003c\/p\u003e\n\u003ch3\u003eWhat's in the box\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSize\u003c\/th\u003e\n\u003cth\u003eUprights, access holes\u003c\/th\u003e\n\u003cth\u003eRails, tapped both ends\u003c\/th\u003e\n\u003cth\u003eHinges\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e250\u003c\/td\u003e\n\u003ctd\u003e2× HFSB5-2020-430-AH10-BH420\u003c\/td\u003e\n\u003ctd\u003e2× HFSB5-2020-328-TPW\u003c\/td\u003e\n\u003ctd\u003e2× HHPBSN5-SET\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e300\u003c\/td\u003e\n\u003ctd\u003e2× HFSB5-2020-480-AH10-BH470\u003c\/td\u003e\n\u003ctd\u003e2× HFSB5-2020-378-TPW\u003c\/td\u003e\n\u003ctd\u003e2× HHPBSN5-SET\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e350\u003c\/td\u003e\n\u003ctd\u003e2× HFSB5-2020-530-AH10-BH520\u003c\/td\u003e\n\u003ctd\u003e2× HFSB5-2020-428-TPW\u003c\/td\u003e\n\u003ctd\u003e2× HHPBSN5-SET\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003eBlack anodised extrusion. Door panels, corner brackets and the four blind-joint screws are not included; the panel DXFs are in the DoomCube-2 repository. Only need hinges? They are sold on their own as the \u003ca href=\"\/products\/misumi-hhpbsn5-door-hinge-set-for-2020-extrusion-doors\"\u003eMISUMI HHPBSN5 Door Hinge Set\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch3\u003eLead time and shipping\u003c\/h3\u003e\n\u003cp\u003eMISUMI cuts and machines each set to order, so count on about two weeks before it ships from the Netherlands, longer than my printed parts. I'll mail you when it is on its way.\u003c\/p\u003e\n\u003cp\u003eThe set weighs a little over a kilo and ships as a PostNL parcel charged by weight at checkout; the free-shipping rule for my printed parts does not cover extrusion.\u003c\/p\u003e\n\u003cp\u003eNeed other MISUMI lengths, profiles or parts for your build? Mail me at \u003ca href=\"mailto:pjotr3dshop@gmail.com\"\u003epjotr3dshop@gmail.com\u003c\/a\u003e with the part numbers and I'll quote your order.\u003c\/p\u003e\n\u003chr\u003e\n\u003cp\u003eDesign: DoomCube-2 by FrankenVoron and the Voron community, published under GPLv3 at github.com\/FrankenVoron\/DoomCube-2. Extrusion and hinges by MISUMI. I source, check and pack the set; the design is theirs.\u003c\/p\u003e","brand":"MISUMI","offers":[{"title":"250","offer_id":55004941451591,"sku":"VRN-DC-DOOR-250","price":74.95,"currency_code":"EUR","in_stock":true},{"title":"300","offer_id":55004941484359,"sku":"VRN-DC-DOOR-300","price":79.95,"currency_code":"EUR","in_stock":true},{"title":"350","offer_id":55004941517127,"sku":"VRN-DC-DOOR-350","price":84.95,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0878\/0575\/5719\/files\/doomcube-door-extrusions-hinges-misumi-hfsb5-2020-black-1325609.png?v=1789351451"},{"product_id":"misumi-hhpbsn5-door-hinge-set-for-2020-extrusion-doors","title":"MISUMI HHPBSN5 Door Hinge Set — for 2020 Extrusion Doors","description":"\u003cp\u003eThe MISUMI hinge the DoomCube-2 BOM specifies for its framed doors: one HHPBSN5-SET in black, or HHPSN5-SET in silver. A set is one flat hinge with conical countersinks, demountable, with a POM bush, for 20 mm T-slot extrusion. A DoomCube door takes two sets; order the quantity you need.\u003c\/p\u003e\n\u003cp\u003eIt fits any 2020 extrusion door, not just DoomCube: a Voron 2.4 or Trident with a framed front door, an enclosure you built yourself. Same part, straight from MISUMI, no substitutes.\u003c\/p\u003e\n\u003ch3\u003eLead time and shipping\u003c\/h3\u003e\n\u003cp\u003eOrdered from MISUMI per sale, so count on about two weeks before it ships from the Netherlands. I'll mail you when it is on its way. Shipping is charged at checkout; add the hinges to a kit order and they travel in the same parcel.\u003c\/p\u003e\n\u003cp\u003eNeed the door extrusions too? The \u003ca href=\"\/products\/doomcube-door-extrusions-hinges-misumi-hfsb5-2020-black\"\u003eDoomCube Door Extrusions + Hinges kit\u003c\/a\u003e has both. Need other MISUMI parts, lengths or profiles? Mail me at \u003ca href=\"mailto:pjotr3dshop@gmail.com\"\u003epjotr3dshop@gmail.com\u003c\/a\u003e with the part numbers and I'll quote your order.\u003c\/p\u003e","brand":"MISUMI","offers":[{"title":"Black","offer_id":55004969271623,"sku":"MIS-HHPBSN5","price":14.95,"currency_code":"EUR","in_stock":true},{"title":"Silver","offer_id":55004969304391,"sku":"MIS-HHPSN5","price":14.95,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0878\/0575\/5719\/files\/misumi-hhpbsn5-door-hinge-set-for-2020-extrusion-doors-9561284.png?v=1789351453"},{"product_id":"e3d-revo-voron-coldside","title":"E3D Revo Voron Coldside — Revo Heatsink for Stealthburner","description":"\u003cp\u003eThe Revo heatsink E3D developed with the Voron Design team for the Stealthburner: a red anodised sink that bolts rigidly to the toolhead with four M3 bolts and takes any Revo nozzle. Nozzle changes are done cold, by hand, in under a minute, with no tools and no hot tightening.\u003c\/p\u003e\n\u003cp\u003eThis is the coldside only. Pair it with a \u003ca href=\"\/products\/e3d-revo-hotside-kit-24v\"\u003eRevo Hotside Kit\u003c\/a\u003e for the HeaterCore and nozzles and you have a complete hotend: Starter for PLA, PETG and ASA at normal speeds, High Flow if you want to print fast, High Flow X if you also print carbon- or glass-filled filament.\u003c\/p\u003e\n\u003ch3\u003eFits\u003c\/h3\u003e\n\u003cp\u003eVoron 2.4, Trident, Switchwire, V1, V0.1 and Legacy, on the Stealthburner and other Revo-compatible toolheads. About 25 g of sink, 1.75 mm filament, 300 °C max with a standard HeaterCore.\u003c\/p\u003e\n\u003ch3\u003eWhat's in the box\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e1 × Revo Voron heatsink\u003c\/li\u003e\n\u003cli\u003e1 × heater extension cable\u003c\/li\u003e\n\u003cli\u003e1 × thermistor extension cable\u003c\/li\u003e\n\u003cli\u003e1 × 100 mm PTFE tube\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003ePrinted parts and mounting instructions are on \u003ca href=\"https:\/\/docs.vorondesign.com\/\" rel=\"noopener\"\u003edocs.vorondesign.com\u003c\/a\u003e. You may need to re-set your Z offset after a nozzle change. E3D part number REVO-VORON-COLD.\u003c\/p\u003e","brand":"E3D","offers":[{"title":"Default Title","offer_id":55033780306247,"sku":"E3D-REVO-VORON-COLD","price":43.95,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0878\/0575\/5719\/files\/e3d-revo-voron-coldside-revo-heatsink-for-stealthburner-2418730.png?v=1789516639"},{"product_id":"e3d-revo-hotside-kit-24v","title":"E3D Revo Hotside Kit, 24V — Starter, High Flow or High Flow X","description":"\u003cp\u003eThe heating half of a Revo hotend: a HeaterCore plus nozzles, matched to how you print. Add it to any Revo coldside (Voron, Six, Prusa, Creality, Hemera XS, Roto) and you're done. All three kits are 24 V.\u003c\/p\u003e\n\u003ch3\u003eWhich one?\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eStarter\u003c\/strong\u003e: 40 W HeaterCore and a 0.6 mm brass nozzle, plus a free 0.4 mm brass nozzle. PLA, PETG and ASA at normal speeds.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHigh Flow\u003c\/strong\u003e: 60 W HeaterCore with 0.4 and 0.6 mm High Flow brass nozzles (roughly 70 % more flow than standard Revo), plus a free 0.4 mm brass nozzle and a Fully Loaded sock pack. For printing fast and big.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHigh Flow X\u003c\/strong\u003e: 60 W HeaterCore with 0.4 and 0.6 mm High Flow ObXidian nozzles (E3DLC-coated, about 55 % more flow), plus the same free brass nozzle and sock pack. For carbon- and glass-filled filament at speed.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eEvery Revo nozzle is a factory-assembled nozzle and heatbreak in one, so there is nothing to hot-tighten. 300 °C max. E3D part numbers REVO-HOT-KIT-24V, REVO-HOT-KIT-HF-24V and REVO-HOT-KIT-HF-X-24V.\u003c\/p\u003e\n\u003cp\u003eNo coldside yet? For a Voron, the \u003ca href=\"\/products\/e3d-revo-voron-coldside\"\u003eRevo Voron Coldside\u003c\/a\u003e is the one.\u003c\/p\u003e","brand":"E3D","offers":[{"title":"Starter (40 W)","offer_id":55033788432711,"sku":"E3D-REVO-HOT-KIT-24V","price":58.95,"currency_code":"EUR","in_stock":true},{"title":"High Flow (60 W)","offer_id":55033788465479,"sku":"E3D-REVO-HOT-KIT-HF-24V","price":129.95,"currency_code":"EUR","in_stock":true},{"title":"High Flow X (60 W, ObXidian)","offer_id":55033788498247,"sku":"E3D-REVO-HOT-KIT-HF-X-24V","price":187.95,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0878\/0575\/5719\/files\/e3d-revo-hotside-kit-24v-starter-high-flow-or-high-flow-x-3442739.png?v=1789516636"},{"product_id":"e3d-revo-nozzle-brass","title":"E3D Revo Nozzle, Brass — 0.15 to 0.8 mm","description":"\u003cp\u003eThe standard Revo nozzle: nozzle and heatbreak in one factory-assembled part, so you screw it into any Revo coldside by hand, cold, and print. No tools, no hot tightening, no leaks from a bad assembly. A swap takes under a minute.\u003c\/p\u003e\n\u003cp\u003eSizes 0.15, 0.25, 0.4, 0.6 and 0.8 mm. Each comes with a colour-coded silicone sock and the size engraved on the nozzle, so you can tell them apart in the drawer.\u003c\/p\u003e\n\u003ch3\u003eFits\u003c\/h3\u003e\n\u003cp\u003eEvery Revo coldside: Revo Voron, Six, Micro, CR, Hemera XS, the Prusa MK3 and Mini editions, Roto. Not compatible with V6-style heater blocks. 1.75 mm filament, 300 °C max, 13 mm diameter, 41 mm long.\u003c\/p\u003e\n\u003cp\u003eYou may need to re-set your Z offset after a swap. The 0.15 mm is a specialist nozzle that clogs more easily; read E3D's filament starter settings before you use it. Want more flow in the same shape? See the \u003ca href=\"\/products\/e3d-revo-high-flow-nozzle-brass\"\u003eRevo High Flow nozzle\u003c\/a\u003e. E3D part numbers RC-NOZZLE-0150 to RC-NOZZLE-0800-AS-SPK.\u003c\/p\u003e","brand":"E3D","offers":[{"title":"0.15 mm","offer_id":55033794691399,"sku":"E3D-RC-NOZZLE-0150-AS-SPK","price":26.95,"currency_code":"EUR","in_stock":true},{"title":"0.25 mm","offer_id":55033794724167,"sku":"E3D-RC-NOZZLE-0250-AS-SPK","price":26.95,"currency_code":"EUR","in_stock":true},{"title":"0.4 mm","offer_id":55033794756935,"sku":"E3D-RC-NOZZLE-0400-AS-SPK","price":26.95,"currency_code":"EUR","in_stock":true},{"title":"0.6 mm","offer_id":55033794789703,"sku":"E3D-RC-NOZZLE-0600-AS-SPK","price":26.95,"currency_code":"EUR","in_stock":true},{"title":"0.8 mm","offer_id":55033794822471,"sku":"E3D-RC-NOZZLE-0800-AS-SPK","price":26.95,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0878\/0575\/5719\/files\/e3d-revo-nozzle-brass-015-to-08-mm-2395261.png?v=1789516639"},{"product_id":"e3d-revo-high-flow-nozzle-brass","title":"E3D Revo High Flow Nozzle, Brass — 0.4 to 1.4 mm","description":"\u003cp\u003eSame size and shape as a standard Revo nozzle, so nothing on your toolhead changes, but with E3D's internal high-flow geometry: more surface area, better heat transfer, roughly 70 % more volumetric flow. Screw it in cold, by hand, and print faster or bigger.\u003c\/p\u003e\n\u003cp\u003eSizes 0.4, 0.6, 0.8, 1.0, 1.2 and 1.4 mm. The nozzle is engraved with its size and \"HF\", and the high-flow insert shows as a circle on the tip.\u003c\/p\u003e\n\u003ch3\u003eFits\u003c\/h3\u003e\n\u003cp\u003eRevo Voron, Six, Micro, CR, Hemera XS, Prusa MK3 and Mini editions, Roto, MicroSwiss NG and Biqu H2 V2. 1.75 mm filament, 300 °C max, 24 V. A 40 W HeaterCore works for most materials; for polycarbonate and other hot filaments the 60 W core gets the most out of it. Not compatible with V6-style heater blocks.\u003c\/p\u003e\n\u003cp\u003eYou may need to re-set your Z offset after a swap. E3D's measured flow rates per size and material are in its \u003ca href=\"https:\/\/e3d-online.com\/blogs\/help-centre\/revo-nozzle-maximum-flow-rates\" rel=\"noopener\"\u003eflow rate documentation\u003c\/a\u003e. E3D part numbers RC-NOZZLE-HF-0400 to RC-NOZZLE-HF-1400-AS-SPK.\u003c\/p\u003e","brand":"E3D","offers":[{"title":"0.4 mm","offer_id":55033803440455,"sku":"E3D-RC-NOZZLE-HF-0400-AS-SPK","price":47.95,"currency_code":"EUR","in_stock":true},{"title":"0.6 mm","offer_id":55033803473223,"sku":"E3D-RC-NOZZLE-HF-0600-AS-SPK","price":47.95,"currency_code":"EUR","in_stock":true},{"title":"0.8 mm","offer_id":55033803505991,"sku":"E3D-RC-NOZZLE-HF-0800-AS-SPK","price":47.95,"currency_code":"EUR","in_stock":true},{"title":"1.0 mm","offer_id":55033803538759,"sku":"E3D-RC-NOZZLE-HF-1000-AS-SPK","price":47.95,"currency_code":"EUR","in_stock":true},{"title":"1.2 mm","offer_id":55033803571527,"sku":"E3D-RC-NOZZLE-HF-1200-AS-SPK","price":47.95,"currency_code":"EUR","in_stock":true},{"title":"1.4 mm","offer_id":55033803604295,"sku":"E3D-RC-NOZZLE-HF-1400-AS-SPK","price":47.95,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0878\/0575\/5719\/files\/e3d-revo-high-flow-nozzle-brass-04-to-14-mm-8060027.jpg?v=1789516641"},{"product_id":"e3d-revo-obxidian-nozzle","title":"E3D Revo ObXidian Nozzle — Abrasion-Resistant, 0.25 to 0.8 mm","description":"\u003cp\u003eE3D's hardest Revo nozzle: a tool-steel tip with the E3DLC coating on a copper-alloy body. It shrugs off the carbon- and glass-filled filament that eats brass, and because the body conducts heat like brass you keep your existing slicer profiles. The coating is non-stick too, so less plastic builds up on the nozzle.\u003c\/p\u003e\n\u003cp\u003eSizes 0.25, 0.4, 0.6 and 0.8 mm. Nozzle and heatbreak in one factory-assembled part, swapped cold by hand. Skip the 0.25 mm for fibre-filled filament: the fibres are often larger than the hole.\u003c\/p\u003e\n\u003ch3\u003eFits\u003c\/h3\u003e\n\u003cp\u003eEvery Revo coldside. 1.75 mm filament, 300 °C max. Not compatible with V6-style heater blocks. Filaments with very aggressive fillers (Polymaker Fiberon PA-CF and PA-GF and the like) wear even ObXidian over time; for those, look at High Temp Abrasive or DiamondBack.\u003c\/p\u003e\n\u003cp\u003eNeed flow as well? See the \u003ca href=\"\/products\/e3d-revo-high-flow-obxidian-nozzle\"\u003eRevo High Flow ObXidian nozzle\u003c\/a\u003e. E3D part numbers RC-NOZZLE-OBX-0250 to RC-NOZZLE-OBX-0800-AS-SPK.\u003c\/p\u003e","brand":"E3D","offers":[{"title":"0.25 mm","offer_id":55033809240391,"sku":"E3D-RC-NOZZLE-OBX-0250-AS-SPK","price":70.95,"currency_code":"EUR","in_stock":true},{"title":"0.4 mm","offer_id":55033809273159,"sku":"E3D-RC-NOZZLE-OBX-0400-AS-SPK","price":70.95,"currency_code":"EUR","in_stock":true},{"title":"0.6 mm","offer_id":55033809305927,"sku":"E3D-RC-NOZZLE-OBX-0600-AS-SPK","price":70.95,"currency_code":"EUR","in_stock":true},{"title":"0.8 mm","offer_id":55033809338695,"sku":"E3D-RC-NOZZLE-OBX-0800-AS-SPK","price":70.95,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0878\/0575\/5719\/files\/e3d-revo-obxidian-nozzle-abrasion-resistant-025-to-08-mm-9737533.png?v=1789516642"},{"product_id":"e3d-revo-high-flow-obxidian-nozzle","title":"E3D Revo High Flow ObXidian Nozzle — 0.4 to 1.4 mm","description":"\u003cp\u003eObXidian's wear resistance and E3DLC non-stick coating combined with the Revo high-flow core: abrasive filament, printed fast. Same form factor as every other Revo nozzle, so nothing on the toolhead changes. Screw it in cold, by hand.\u003c\/p\u003e\n\u003cp\u003eSizes 0.4, 0.6, 0.8, 1.0, 1.2 and 1.4 mm. For everyday PLA and PETG the plain \u003ca href=\"\/products\/e3d-revo-high-flow-nozzle-brass\"\u003eHigh Flow brass nozzle\u003c\/a\u003e is the cheaper choice; this one is for carbon and glass fibre.\u003c\/p\u003e\n\u003ch3\u003eFits\u003c\/h3\u003e\n\u003cp\u003eEvery Revo coldside. 1.75 mm filament, 300 °C max, 24 V; a 60 W HeaterCore gets the most out of it. Not compatible with V6-style heater blocks. Filaments with very aggressive fillers still wear it over time.\u003c\/p\u003e\n\u003cp\u003eYou may need to re-set your Z offset after a swap. E3D part numbers RC-NOZZLE-HF-OBX-0400 to RC-NOZZLE-HF-OBX-1400-AS-SPK.\u003c\/p\u003e","brand":"E3D","offers":[{"title":"0.4 mm","offer_id":55033816285511,"sku":"E3D-RC-NOZZLE-HF-OBX-0400-AS-SPK","price":75.95,"currency_code":"EUR","in_stock":true},{"title":"0.6 mm","offer_id":55033816318279,"sku":"E3D-RC-NOZZLE-HF-OBX-0600-AS-SPK","price":75.95,"currency_code":"EUR","in_stock":true},{"title":"0.8 mm","offer_id":55033816351047,"sku":"E3D-RC-NOZZLE-HF-OBX-0800-AS-SPK","price":75.95,"currency_code":"EUR","in_stock":true},{"title":"1.0 mm","offer_id":55033816383815,"sku":"E3D-RC-NOZZLE-HF-OBX-1000-AS-SPK","price":75.95,"currency_code":"EUR","in_stock":true},{"title":"1.2 mm","offer_id":55033816416583,"sku":"E3D-RC-NOZZLE-HF-OBX-1200-AS-SPK","price":75.95,"currency_code":"EUR","in_stock":true},{"title":"1.4 mm","offer_id":55033816449351,"sku":"E3D-RC-NOZZLE-HF-OBX-1400-AS-SPK","price":75.95,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0878\/0575\/5719\/files\/e3d-revo-high-flow-obxidian-nozzle-04-to-14-mm-7777609.png?v=1789516640"},{"product_id":"e3d-high-flow-obxidian-hotend-bambu-a1","title":"E3D High Flow ObXidian HotEnd for Bambu Lab A1, A1 Mini \u0026 A2L","description":"\u003cp\u003eA drop-in HotEnd upgrade for the Bambu Lab A1, A1 Mini and A2L, made by E3D under official licence from Bambu Lab. The nozzle carries E3D's ObXidian tool-steel tip with the E3DLC coating, so carbon- and glass-filled filament stops eating your nozzle, and the reshaped internal geometry pushes up to 70% more flow than the stock HotEnd.\u003c\/p\u003e\n\u003cp\u003eThe coating is non-stick as well: less plastic creeping up the nozzle, fewer crashes, easier cleaning. It installs like the stock part — unclip the old HotEnd, slot this one in. Heater and thermistor wiring stay in the toolhead, so there is nothing to solder and no mount or part-cooling change.\u003c\/p\u003e\n\u003ch3\u003eFits\u003c\/h3\u003e\n\u003cp\u003eBambu Lab A1, A1 Mini and A2L. 1.75 mm filament, 300 °C max. \u003cstrong\u003eNot\u003c\/strong\u003e compatible with the H2 series or with X1\/P1 machines — for those see the \u003ca href=\"\/products\/e3d-high-flow-obxidian-complete-hotend-bambu-x1-p1\"\u003eX1 \u0026amp; P1 version\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch3\u003eGood to know\u003c\/h3\u003e\n\u003cp\u003eVery aggressive fillers (Polymaker's Fiberon PA-CF and PA-GF and the like) will wear even ObXidian over time; for those, DiamondBack is the set-and-forget option. And skip 0.4 mm for heavily filled filament — the fibres are often close to the hole size.\u003c\/p\u003e\n\u003cp\u003eE3D part numbers BAMBU-HF-OBX-A1-0400-SPK and BAMBU-HF-OBX-A1-0600-SPK.\u003c\/p\u003e","brand":"E3D","offers":[{"title":"0.4 mm","offer_id":55035228586311,"sku":"E3D-BAMBU-HF-OBX-A1-0400-SPK","price":64.95,"currency_code":"EUR","in_stock":true},{"title":"0.6 mm","offer_id":55035228619079,"sku":"E3D-BAMBU-HF-OBX-A1-0600-SPK","price":64.95,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0878\/0575\/5719\/files\/e3d-high-flow-obxidian-hotend-for-bambu-lab-a1-a1-mini-a2l-2278041.png?v=1789516644"},{"product_id":"e3d-diamondback-hotend-bambu-a1","title":"E3D DiamondBack HotEnd for Bambu Lab A1, A1 Mini \u0026 A2L","description":"\u003cp\u003eThe nozzle you buy once. A solid polycrystalline-diamond (PCD) tip — not a coating — in a HotEnd that drops straight into the Bambu Lab A1, A1 Mini or A2L. Made by E3D with DiamondBack, under official licence from Bambu Lab.\u003c\/p\u003e\n\u003cp\u003eDiamond is the hardest material there is, so metal-, ceramic- and fibre-filled filaments simply don't wear it the way they chew through brass or hardened steel. PCD also conducts heat exceptionally well, which helps layer adhesion, and the polished tip leaves noticeably smoother top surfaces — a bit like ironing, for free.\u003c\/p\u003e\n\u003ch3\u003eFits\u003c\/h3\u003e\n\u003cp\u003eBambu Lab A1, A1 Mini and A2L. 1.75 mm filament, rated to 320 °C. \u003cstrong\u003eNot\u003c\/strong\u003e compatible with the H2 series. Your existing slicer profiles work as-is, and Bambu Lab approved these officially, so your printer warranty stays intact.\u003c\/p\u003e\n\u003ch3\u003eDiamondBack or ObXidian?\u003c\/h3\u003e\n\u003cp\u003eIf you print abrasives now and then, the cheaper \u003ca href=\"\/products\/e3d-high-flow-obxidian-hotend-bambu-a1\"\u003eHigh Flow ObXidian A1 HotEnd\u003c\/a\u003e is plenty. If aggressive filled filament is what your machine runs on day in, day out, DiamondBack is the one that stops the nozzle conversation for good.\u003c\/p\u003e\n\u003cp\u003eSkip 0.4 mm for heavily filled filament — the fibres are often close to the hole size. E3D part numbers BAMBU-DIAMOND-A1-AS-0400-SPK and BAMBU-DIAMOND-A1-AS-0600-SPK.\u003c\/p\u003e","brand":"E3D","offers":[{"title":"0.4 mm","offer_id":55035229372743,"sku":"E3D-BAMBU-DIAMOND-A1-AS-0400-SPK","price":108.95,"currency_code":"EUR","in_stock":true},{"title":"0.6 mm","offer_id":55035229405511,"sku":"E3D-BAMBU-DIAMOND-A1-AS-0600-SPK","price":108.95,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0878\/0575\/5719\/files\/e3d-diamondback-hotend-for-bambu-lab-a1-a1-mini-a2l-5900650.png?v=1789516637"},{"product_id":"e3d-high-flow-obxidian-hotend-nozzle-bambu-x1-p1","title":"E3D High Flow ObXidian HotEnd with Nozzle for Bambu Lab X1 \u0026 P1","description":"\u003cp\u003eThe metal-only version: HotEnd body and ObXidian nozzle, for anyone reusing the fan and heater from their current Bambu HotEnd. Made by E3D under official licence from Bambu Lab — they are the only approved manufacturer of aftermarket Bambu HotEnds.\u003c\/p\u003e\n\u003cp\u003eInside is E3D's patent-pending high-flow nozzle geometry, first developed for Revo, good for about 60% more volumetric flow than stock. The E3DLC coating on nozzle and heater block adds abrasion resistance for fibre-filled filament and keeps plastic from sticking where it shouldn't.\u003c\/p\u003e\n\u003ch3\u003eWhat's in the box\u003c\/h3\u003e\n\u003cp\u003eMetal-only HotEnd, thermal paste, silicone sock, HotEnd clip and fixings. No fan and no heater — you move those over from your existing HotEnd. Want the complete drop-in instead? Take the \u003ca href=\"\/products\/e3d-high-flow-obxidian-complete-hotend-bambu-x1-p1\"\u003ecomplete HotEnd\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch3\u003eFits\u003c\/h3\u003e\n\u003cp\u003eBambu Lab X1, X1 Carbon, P1P and P1S. 1.75 mm filament, 300 °C max. \u003cstrong\u003eNot\u003c\/strong\u003e compatible with the X1E, the A1 series or the H2 series.\u003c\/p\u003e\n\u003cp\u003eVery aggressive fillers (Polymaker's Fiberon PA-CF and PA-GF and the like) will wear even ObXidian over time. E3D part numbers BAMBU-HF-OBX-MO-0400-SPK and BAMBU-HF-OBX-MO-0600-SPK.\u003c\/p\u003e","brand":"E3D","offers":[{"title":"0.4 mm","offer_id":55035229503815,"sku":"E3D-BAMBU-HF-OBX-MO-0400-SPK","price":86.95,"currency_code":"EUR","in_stock":true},{"title":"0.6 mm","offer_id":55035229536583,"sku":"E3D-BAMBU-HF-OBX-MO-0600-SPK","price":86.95,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0878\/0575\/5719\/files\/e3d-high-flow-obxidian-hotend-with-nozzle-for-bambu-lab-x1-p1-6354329.png?v=1789516633"},{"product_id":"e3d-high-flow-obxidian-complete-hotend-bambu-x1-p1","title":"E3D High Flow ObXidian Complete HotEnd for Bambu Lab X1 \u0026 P1","description":"\u003cp\u003eEverything in one box: HotEnd, ObXidian nozzle, fan and heater, matched to your printer. Swap the whole assembly and you're printing again in about five minutes — no adjustment to the mount or part cooling, no soldering. E3D builds these under official licence from Bambu Lab, the only approved maker of aftermarket Bambu HotEnds.\u003c\/p\u003e\n\u003cp\u003eThe nozzle uses E3D's patent-pending high-flow geometry, first developed for Revo: roughly 60% more volumetric flow than stock. Push the flow limit up in the slicer, or keep your speeds and get more consistent extrusion — either way interlayer adhesion holds up, which is where fast printing usually loses out. The E3DLC coating on nozzle and heater block adds abrasion resistance and keeps plastic from building up.\u003c\/p\u003e\n\u003ch3\u003eWhat's in the box\u003c\/h3\u003e\n\u003cp\u003eMetal-only HotEnd, silicone sock, HotEnd clip, fan (P1 or X1 depending on your choice), heater and fixings.\u003c\/p\u003e\n\u003ch3\u003eFits\u003c\/h3\u003e\n\u003cp\u003ePick the X1-Carbon version for the X1 and X1 Carbon, the P1 version for the P1P and P1S. 1.75 mm filament, 300 °C max. \u003cstrong\u003eNot\u003c\/strong\u003e compatible with the X1E, the A1 series or the H2 series.\u003c\/p\u003e\n\u003ch3\u003eGood to know\u003c\/h3\u003e\n\u003cp\u003eWant the harder, hotter-running nozzle? See the \u003ca href=\"\/products\/e3d-obxidian-500-complete-hotend-bambu-x1-p1\"\u003eObXiDian 500 version\u003c\/a\u003e, five times more wear-resistant and rated to 500 °C. E3D part numbers BAMBU-HF-OBX-X1-AS and BAMBU-HF-OBX-P1-AS.\u003c\/p\u003e","brand":"E3D","offers":[{"title":"X1 \/ X1 Carbon \/ 0.4 mm","offer_id":55035230716231,"sku":"E3D-BAMBU-HF-OBX-X1-AS-0400-SPK","price":129.95,"currency_code":"EUR","in_stock":true},{"title":"X1 \/ X1 Carbon \/ 0.6 mm","offer_id":55035230748999,"sku":"E3D-BAMBU-HF-OBX-X1-AS-0600-SPK","price":129.95,"currency_code":"EUR","in_stock":true},{"title":"P1P \/ P1S \/ 0.4 mm","offer_id":55035230781767,"sku":"E3D-BAMBU-HF-OBX-P1-AS-0400-SPK","price":129.95,"currency_code":"EUR","in_stock":true},{"title":"P1P \/ P1S \/ 0.6 mm","offer_id":55035230814535,"sku":"E3D-BAMBU-HF-OBX-P1-AS-0600-SPK","price":129.95,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0878\/0575\/5719\/files\/e3d-high-flow-obxidian-complete-hotend-for-bambu-lab-x1-p1-9752364.png?v=1789516644"},{"product_id":"e3d-obxidian-500-complete-hotend-bambu-x1-p1","title":"E3D ObXiDian 500 Complete HotEnd for Bambu Lab X1, P1 \u0026 X1E","description":"\u003cp\u003eE3D's newest Bambu HotEnd, and the one I'd buy if I printed filled filament regularly. ObXiDian 500 is at least five times more wear-resistant than standard ObXidian, and where ObXidian stops at 300 °C this one is rated to 500 °C — you'll hit your printer's limit long before the nozzle's. Built by E3D under official licence from Bambu Lab.\u003c\/p\u003e\n\u003cp\u003eThe nozzle uses a four-channel internal insert that improves heat transfer into the filament and lifts volumetric flow by up to 60%. Most abrasive materials, glow-in-the-dark included, simply won't wear it. The low-surface-energy coating keeps plastic from building up on the tip, which means easier cleaning and fewer crashes.\u003c\/p\u003e\n\u003ch3\u003eWhat you get\u003c\/h3\u003e\n\u003cp\u003eA complete HotEnd with fan and heater matched to your printer. Same form factor as the stock Bambu part, so it drops in with no change to the mount or part cooling.\u003c\/p\u003e\n\u003ch3\u003eFits\u003c\/h3\u003e\n\u003cp\u003eChoose X1C for the X1 Carbon, P1 for the P1P and P1S, or X1E for the X1E. 1.75 mm filament. \u003cstrong\u003eNot\u003c\/strong\u003e compatible with the A1 series or the H2 series. Max print temperature is still your machine's: 320 °C on the X1E, 300 °C on X1C, P1P and P1S.\u003c\/p\u003e\n\u003ch3\u003eObXiDian 500 or ObXidian?\u003c\/h3\u003e\n\u003cp\u003ePrint abrasives occasionally and the \u003ca href=\"\/products\/e3d-high-flow-obxidian-complete-hotend-bambu-x1-p1\"\u003eHigh Flow ObXidian HotEnd\u003c\/a\u003e is enough and costs less. Print them constantly and the 500 pays for itself in nozzles you don't replace. E3D part numbers BAMBU-HF-OBD-X1, -P1 and -X1E.\u003c\/p\u003e","brand":"E3D","offers":[{"title":"X1 Carbon \/ 0.4 mm","offer_id":55035232452935,"sku":"E3D-BAMBU-HF-OBD-X1-0400-SPK","price":158.95,"currency_code":"EUR","in_stock":true},{"title":"X1 Carbon \/ 0.6 mm","offer_id":55035232485703,"sku":"E3D-BAMBU-HF-OBD-X1-0600-SPK","price":158.95,"currency_code":"EUR","in_stock":true},{"title":"P1P \/ P1S \/ 0.4 mm","offer_id":55035232518471,"sku":"E3D-BAMBU-HF-OBD-P1-0400-SPK","price":158.95,"currency_code":"EUR","in_stock":true},{"title":"P1P \/ P1S \/ 0.6 mm","offer_id":55035232551239,"sku":"E3D-BAMBU-HF-OBD-P1-0600-SPK","price":158.95,"currency_code":"EUR","in_stock":true},{"title":"X1E \/ 0.4 mm","offer_id":55035232584007,"sku":"E3D-BAMBU-HF-OBD-X1E-0400-SPK","price":173.95,"currency_code":"EUR","in_stock":true},{"title":"X1E \/ 0.6 mm","offer_id":55035232616775,"sku":"E3D-BAMBU-HF-OBD-X1E-0600-SPK","price":173.95,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0878\/0575\/5719\/files\/e3d-obxidian-500-complete-hotend-for-bambu-lab-x1-p1-x1e-9240019.png?v=1789516641"},{"product_id":"e3d-diamondback-hotend-bambu-x1-p1","title":"E3D DiamondBack HotEnd for Bambu Lab X1C, X1E, P1P \u0026 P1S","description":"\u003cp\u003eThe last nozzle your Bambu will need. A solid polycrystalline-diamond (PCD) tip — a real diamond insert, not a coating — in a complete HotEnd that drops into the X1 Carbon, X1E, P1P or P1S. An official collaboration between E3D, DiamondBack and Bambu Lab.\u003c\/p\u003e\n\u003cp\u003ePCD is thousands of diamond crystals bonded diamond-to-diamond, which keeps diamond's hardness without the brittleness of a single crystal. Metal-, ceramic- and fibre-filled filaments that destroy brass and steadily wear hardened steel barely touch it. It also conducts heat better than anything else in a nozzle, so layer adhesion improves, and the polished tip plus low friction leaves top layers looking almost ironed.\u003c\/p\u003e\n\u003ch3\u003eFits\u003c\/h3\u003e\n\u003cp\u003ePick the version matching your machine — X1 Carbon, P1P\/P1S or X1E — each ships with the right connector. 1.75 mm filament. Drop-in fit: no change to the mount or part cooling. Bambu Lab approved it officially, so your warranty stays intact. \u003cstrong\u003eNot\u003c\/strong\u003e compatible with the A1 or H2 series.\u003c\/p\u003e\n\u003ch3\u003eDiamondBack or ObXidian?\u003c\/h3\u003e\n\u003cp\u003eOccasional carbon fibre? The \u003ca href=\"\/products\/e3d-high-flow-obxidian-complete-hotend-bambu-x1-p1\"\u003eHigh Flow ObXidian HotEnd\u003c\/a\u003e costs a lot less and adds flow rate. Aggressive filled filament around the clock? DiamondBack is the set-and-forget one. Note it isn't a high-flow nozzle — if you want both hardness and flow, look at the \u003ca href=\"\/products\/e3d-obxidian-500-complete-hotend-bambu-x1-p1\"\u003eObXiDian 500\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003eSkip 0.4 mm for heavily filled filament — the fibres are often close to the hole size. E3D part numbers BAMBU-DIAMOND-X1-AS, -P1-AS and -X1E-AS.\u003c\/p\u003e","brand":"E3D","offers":[{"title":"X1 Carbon \/ 0.4 mm","offer_id":55035233304903,"sku":"E3D-BAMBU-DIAMOND-X1-AS-0400-SPK","price":180.95,"currency_code":"EUR","in_stock":true},{"title":"X1 Carbon \/ 0.6 mm","offer_id":55035233337671,"sku":"E3D-BAMBU-DIAMOND-X1-AS-0600-SPK","price":180.95,"currency_code":"EUR","in_stock":true},{"title":"X1 Carbon \/ 0.8 mm","offer_id":55035233370439,"sku":"E3D-BAMBU-DIAMOND-X1-AS-0800-SPK","price":180.95,"currency_code":"EUR","in_stock":true},{"title":"P1P \/ P1S \/ 0.4 mm","offer_id":55035233403207,"sku":"E3D-BAMBU-DIAMOND-P1-AS-0400-SPK","price":180.95,"currency_code":"EUR","in_stock":true},{"title":"P1P \/ P1S \/ 0.6 mm","offer_id":55035233435975,"sku":"E3D-BAMBU-DIAMOND-P1-AS-0600-SPK","price":180.95,"currency_code":"EUR","in_stock":true},{"title":"P1P \/ P1S \/ 0.8 mm","offer_id":55035233468743,"sku":"E3D-BAMBU-DIAMOND-P1-AS-0800-SPK","price":180.95,"currency_code":"EUR","in_stock":true},{"title":"X1E \/ 0.4 mm","offer_id":55035233501511,"sku":"E3D-BAMBU-DIAMOND-X1E-AS-0400-SPK","price":180.95,"currency_code":"EUR","in_stock":true},{"title":"X1E \/ 0.6 mm","offer_id":55035233534279,"sku":"E3D-BAMBU-DIAMOND-X1E-AS-0600-SPK","price":180.95,"currency_code":"EUR","in_stock":true},{"title":"X1E \/ 0.8 mm","offer_id":55035233567047,"sku":"E3D-BAMBU-DIAMOND-X1E-AS-0800-SPK","price":180.95,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0878\/0575\/5719\/files\/e3d-diamondback-hotend-for-bambu-lab-x1c-x1e-p1p-p1s-2269396.png?v=1789516643"},{"product_id":"e3d-obxidian-500-hotend-bambu-h2-p2-x2","title":"E3D ObXiDian 500 HotEnd for Bambu Lab H2, P2, X2 \u0026 A2","description":"\u003cp\u003eThe HotEnd upgrade for Bambu's newest machines — the H2 and P2 series and the X2D. E3D builds these under official licence from Bambu Lab, and ObXiDian 500 is their hardest nozzle coating yet: at least five times more wear-resistant than standard ObXidian, and rated to 500 °C where ObXidian stops at 300.\u003c\/p\u003e\n\u003cp\u003eThe four-channel internal insert improves heat transfer into the filament and lifts volumetric flow by up to 60%. Most abrasives — carbon fibre, glass fibre, even glow-in-the-dark — simply won't wear it. The low-surface-energy coating keeps plastic off the tip, so cleaning is easier and you get fewer crashes.\u003c\/p\u003e\n\u003ch3\u003eFits\u003c\/h3\u003e\n\u003cp\u003eBambu Lab H2D, H2C, H2S, P2S, X2D and A2L. 1.75 mm filament. Same form factor as the stock HotEnd, so it drops in with no change to the mount or part cooling. \u003cstrong\u003eNot\u003c\/strong\u003e compatible with the X1\/P1 or A1 series — for those see the \u003ca href=\"\/products\/e3d-obxidian-500-complete-hotend-bambu-x1-p1\"\u003eX1 \u0026amp; P1 version\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch3\u003eGood to know\u003c\/h3\u003e\n\u003cp\u003eYour printer's own limit still applies, not the nozzle's. Want the absolute hardest tip instead of flow? The \u003ca href=\"\/products\/e3d-diamondback-hotend-bambu-h2-p2-x2\"\u003eDiamondBack for the same machines\u003c\/a\u003e uses a solid diamond. E3D part numbers BAMBU-HF-OBD-H2-P2-0400-SPK and -0600-SPK.\u003c\/p\u003e","brand":"E3D","offers":[{"title":"0.4 mm","offer_id":55037134995783,"sku":"E3D-BAMBU-HF-OBD-H2-P2-0400-SPK","price":129.95,"currency_code":"EUR","in_stock":true},{"title":"0.6 mm","offer_id":55037135028551,"sku":"E3D-BAMBU-HF-OBD-H2-P2-0600-SPK","price":129.95,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0878\/0575\/5719\/files\/e3d-obxidian-500-hotend-for-bambu-lab-h2-p2-x2-a2-9880552.png?v=1789516642"},{"product_id":"e3d-diamondback-hotend-bambu-h2-p2-x2","title":"E3D DiamondBack HotEnd for Bambu Lab H2, P2, X2 \u0026 A2","description":"\u003cp\u003eA solid polycrystalline-diamond (PCD) tip — a real diamond insert, not a coating — in a HotEnd that drops straight into Bambu's H2 and P2 series and the X2D. An official collaboration between E3D, DiamondBack and Bambu Lab.\u003c\/p\u003e\n\u003cp\u003ePCD is thousands of diamond crystals bonded diamond-to-diamond: it keeps diamond's hardness without the brittleness of a single crystal. Metal-, ceramic- and fibre-filled filaments that destroy brass and steadily wear hardened steel barely touch it. It also conducts heat better than anything else in a nozzle, which helps layer adhesion, and the polished tip leaves top surfaces looking almost ironed.\u003c\/p\u003e\n\u003ch3\u003eFits\u003c\/h3\u003e\n\u003cp\u003eBambu Lab H2D, H2C, H2S, P2S, X2D and A2L. 1.75 mm filament. Drop-in: no change to the mount or part cooling, and your existing slicer profiles keep working. Bambu Lab approved it officially, so your printer warranty stays intact. \u003cstrong\u003eNot\u003c\/strong\u003e compatible with the X1\/P1 or A1 series — for those see the \u003ca href=\"\/products\/e3d-diamondback-hotend-bambu-x1-p1\"\u003eX1 \u0026amp; P1 version\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch3\u003eFour sizes, and which to skip\u003c\/h3\u003e\n\u003cp\u003e0.2, 0.4, 0.6 and 0.8 mm. Skip 0.2 and 0.4 for heavily filled filament — the fibres are often close to the hole size. Want flow as well as hardness? The \u003ca href=\"\/products\/e3d-obxidian-500-hotend-bambu-h2-p2-x2\"\u003eObXiDian 500 for the same machines\u003c\/a\u003e costs less and adds up to 60% flow rate.\u003c\/p\u003e\n\u003cp\u003eE3D part numbers BAMBU-DIAMOND-HP2-AS-0200-SPK through -0800-SPK.\u003c\/p\u003e","brand":"E3D","offers":[{"title":"0.2 mm","offer_id":55037137617223,"sku":"E3D-BAMBU-DIAMOND-HP2-AS-0200-SPK","price":173.95,"currency_code":"EUR","in_stock":true},{"title":"0.4 mm","offer_id":55037137649991,"sku":"E3D-BAMBU-DIAMOND-HP2-AS-0400-SPK","price":173.95,"currency_code":"EUR","in_stock":true},{"title":"0.6 mm","offer_id":55037137682759,"sku":"E3D-BAMBU-DIAMOND-HP2-AS-0600-SPK","price":173.95,"currency_code":"EUR","in_stock":true},{"title":"0.8 mm","offer_id":55037137715527,"sku":"E3D-BAMBU-DIAMOND-HP2-AS-0800-SPK","price":173.95,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0878\/0575\/5719\/files\/e3d-diamondback-hotend-for-bambu-lab-h2-p2-x2-a2-1530189.png?v=1789516635"},{"product_id":"e3d-revo-pz-probe-voron-coldside","title":"E3D Revo PZ Probe Voron Coldside — Nozzle-Touch Bed Levelling for Stealthburner","description":"\u003cp\u003eA Revo Voron heatsink with a piezo element built in, so the nozzle itself becomes the bed probe. No inductive sensor bolted to the side, no separate probe to align — same form factor as the Revo Voron coldside you already know, and it drops into a Stealthburner.\u003c\/p\u003e\n\u003cp\u003eThe piezo turns the vibration of nozzle touching bed into a signal. You calibrate the Z offset once for the flex in your motion system, and after that you screw in a new nozzle by hand and PZ Probe handles the rest. Probing with the nozzle rather than a sensor nearby also means the mesh is measured where it matters, which shows up in the first layer.\u003c\/p\u003e\n\u003ch3\u003eWeight, and why it matters\u003c\/h3\u003e\n\u003cp\u003e36 g for the heatsink with the piezo integrated — under 40 g including cables. That is lighter than any Stealthburner toolhead plus separate probe combination, which is exactly what you want on a Voron running high accelerations.\u003c\/p\u003e\n\u003ch3\u003eWhat you need\u003c\/h3\u003e\n\u003cp\u003eThe only new part to add to an existing Stealthburner is a flat flex cable. Add a Revo hotside and nozzles and you're printing — see the \u003ca href=\"\/products\/e3d-revo-hotside-kit-24v\"\u003eRevo Hotside Kit\u003c\/a\u003e for the heater and thermistor. Read E3D's technical datasheet before installing; the probe is not meant to be taken apart, and doing so voids the warranty.\u003c\/p\u003e\n\u003ch3\u003eIn the box\u003c\/h3\u003e\n\u003cp\u003eRevo Voron heatsink with integrated piezo, PZ Probe board, extension cables, two M2 board mounting screws, Bowden tubing. 1.75 mm filament, 60 °C maximum ambient. E3D part number PIEZO-VORON-COLD.\u003c\/p\u003e","brand":"E3D","offers":[{"title":"Default Title","offer_id":55037157179719,"sku":"E3D-PIEZO-VORON-COLD","price":86.95,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0878\/0575\/5719\/files\/e3d-revo-pz-probe-voron-coldside-nozzle-touch-bed-levelling-for-stealthburner-9086758.png?v=1789516636"},{"product_id":"e3d-pz-probe-kit","title":"E3D PZ Probe Kit — Piezo Bed Levelling for Any Printer","description":"\u003cp\u003eThe PZ Probe on its own, for builds outside the Revo ecosystem. A piezo washer plus the PZ Board, so you can add contact probing to whatever toolhead you're running.\u003c\/p\u003e\n\u003cp\u003eThe piezo element turns vibration into an electrical signal the moment something makes contact. The board speaks I2C or UART, and you can set it to trigger on either compression or expansion of the element — which is what makes it flexible: use it as a Z probe under the bed or in an extruder mount, as an X or Y endstop, or to measure tool offsets on a toolchanger.\u003c\/p\u003e\n\u003ch3\u003eConfiguring it\u003c\/h3\u003e\n\u003cp\u003eThe PZ Board has five configurations, so you pick the communication method that suits your electronics. Commands let you fine-tune sensitivity and save the result to a preset. E3D's technical datasheet has the full command list — read it before you install.\u003c\/p\u003e\n\u003ch3\u003eIn the box\u003c\/h3\u003e\n\u003cp\u003eOne PZ washer, one PZ Probe board, extension cables and two M2 board mounting screws.\u003c\/p\u003e\n\u003ch3\u003eRunning a Voron with Stealthburner?\u003c\/h3\u003e\n\u003cp\u003eThen the \u003ca href=\"\/products\/e3d-revo-pz-probe-voron-coldside\"\u003eRevo PZ Probe Voron Coldside\u003c\/a\u003e is the easier route — same probe, already built into a Revo heatsink, so the nozzle is the probe and there's nothing to mount. E3D part number PIEZO-WASHER.\u003c\/p\u003e","brand":"E3D","offers":[{"title":"Default Title","offer_id":55037158490439,"sku":"E3D-PIEZO-WASHER","price":50.95,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0878\/0575\/5719\/files\/e3d-pz-probe-kit-piezo-bed-levelling-for-any-printer-9366714.png?v=1789516638"},{"product_id":"e3d-revo-hta-nozzle","title":"E3D Revo HTA Nozzle — High Temp \u0026 Abrasion-Resistant, 0.25 to 0.8 mm","description":"\u003cp\u003eThe Revo nozzle for the filaments that beat everything else: high temperature and abrasion-resistant in one. A hardened steel tip on a copper carrier and spreader, coated in chromium nitride — so it takes the heat, shrugs off fibre fill, resists corrosion and doesn't let plastic stick.\u003c\/p\u003e\n\u003cp\u003eRated to 500 °C. That is the nozzle's limit, not your setup's: on a 40 W or 60 W HeaterCore you are capped at 300 °C, and you need a Revo High Temperature hotside to go beyond it. Worth knowing before you buy for PEEK or PEI.\u003c\/p\u003e\n\u003ch3\u003eFits\u003c\/h3\u003e\n\u003cp\u003eEvery Revo coldside. 1.75 mm filament. Nozzle and heatbreak are one factory-assembled part, so no hot-tightening and no leaks — swap it cold, by hand. Not compatible with V6-style heater blocks, and expect to re-check your Z offset after a swap.\u003c\/p\u003e\n\u003ch3\u003eHTA or ObXidian?\u003c\/h3\u003e\n\u003cp\u003eSimilar hardness, different reason to buy. \u003ca href=\"\/products\/e3d-revo-obxidian-nozzle\"\u003eObXidian\u003c\/a\u003e stops at 300 °C and costs less; HTA is what you want when the material is both abrasive \u003cem\u003eand\u003c\/em\u003e hot. For the hardest option of all, see the \u003ca href=\"\/products\/e3d-revo-obxidian-500-nozzle\"\u003eObXiDian 500\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003eHTA nozzles are grey with the size engraved. Very aggressive fillers (Polymaker's Fiberon PA-CF and PA-GF and the like) will wear even these over time. Skip 0.25 mm for anything fibre-filled. E3D part numbers RC-NOZZLE-HTA-AS-0250 to -0800-SPK.\u003c\/p\u003e","brand":"E3D","offers":[{"title":"0.25 mm","offer_id":55037179887943,"sku":"E3D-RC-NOZZLE-HTA-AS-0250-SPK","price":77.95,"currency_code":"EUR","in_stock":true},{"title":"0.4 mm","offer_id":55037179920711,"sku":"E3D-RC-NOZZLE-HTA-AS-0400-SPK","price":77.95,"currency_code":"EUR","in_stock":true},{"title":"0.6 mm","offer_id":55037179953479,"sku":"E3D-RC-NOZZLE-HTA-AS-0600-SPK","price":77.95,"currency_code":"EUR","in_stock":true},{"title":"0.8 mm","offer_id":55037179986247,"sku":"E3D-RC-NOZZLE-HTA-AS-0800-SPK","price":77.95,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0878\/0575\/5719\/files\/e3d-revo-hta-nozzle-high-temp-abrasion-resistant-025-to-08-mm-4774715.png?v=1789516634"},{"product_id":"e3d-revo-obxidian-500-nozzle","title":"E3D Revo ObXiDian 500 Nozzle — 0.4 to 0.8 mm","description":"\u003cp\u003eE3D's hardest Revo nozzle. ObXiDian 500 is at least five times more wear-resistant than standard ObXidian, and where ObXidian stops at 300 °C this one is rated to 500. Most abrasive filament — carbon fibre, glass fibre, even the UV-reactive glow-in-the-dark stuff that quietly destroys nozzles — simply won't wear it.\u003c\/p\u003e\n\u003cp\u003eThe coating has a low surface energy, so plastic doesn't build up on the tip: easier to clean between prints, and fewer crashes and cosmetic defects from a blob that grew where it shouldn't. Thermal performance is good enough that interlayer adhesion improves too.\u003c\/p\u003e\n\u003ch3\u003eFits\u003c\/h3\u003e\n\u003cp\u003eEvery Revo coldside. 1.75 mm filament. Nozzle and heatbreak in one factory-assembled part — no hot-tightening, no leaks, swapped cold by hand. Not compatible with V6-style heater blocks. Your printer's own maximum still applies: 500 °C is the nozzle's ceiling, not your hotside's.\u003c\/p\u003e\n\u003ch3\u003eObXiDian 500 or ObXidian?\u003c\/h3\u003e\n\u003cp\u003eIf you print abrasives now and then, \u003ca href=\"\/products\/e3d-revo-obxidian-nozzle\"\u003eObXidian\u003c\/a\u003e is plenty and costs less. If that is what your machine runs on, the 500 pays for itself in nozzles you don't replace. Need flow as well? See the \u003ca href=\"\/products\/e3d-revo-high-flow-obxidian-500-nozzle\"\u003eHigh Flow ObXiDian 500\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003eSkip 0.4 mm for heavily filled filament — the fibres are often close to the hole size. E3D part numbers RC-NOZZLE-OBD-AS-0400 to -0800-SPK.\u003c\/p\u003e","brand":"E3D","offers":[{"title":"0.4 mm","offer_id":55037180215623,"sku":"E3D-RC-NOZZLE-OBD-AS-0400-SPK","price":79.95,"currency_code":"EUR","in_stock":true},{"title":"0.6 mm","offer_id":55037180248391,"sku":"E3D-RC-NOZZLE-OBD-AS-0600-SPK","price":79.95,"currency_code":"EUR","in_stock":true},{"title":"0.8 mm","offer_id":55037180281159,"sku":"E3D-RC-NOZZLE-OBD-AS-0800-SPK","price":79.95,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0878\/0575\/5719\/files\/e3d-revo-obxidian-500-nozzle-04-to-08-mm-4387452.png?v=1789516636"},{"product_id":"e3d-revo-high-flow-obxidian-500-nozzle","title":"E3D Revo High Flow ObXiDian 500 Nozzle — 0.4 to 0.8 mm","description":"\u003cp\u003eBoth at once: E3D's hardest nozzle coating and their high-flow geometry. ObXiDian 500 is at least five times more wear-resistant than standard ObXidian and rated to 500 °C, and the four-channel internal insert pushes heat into the filament far better than a plain bore — so you can run abrasive material fast instead of choosing one or the other.\u003c\/p\u003e\n\u003cp\u003eSame form factor as every other Revo nozzle, so nothing on your toolhead changes. The low-surface-energy coating keeps plastic off the tip: less cleaning between prints, fewer crashes.\u003c\/p\u003e\n\u003ch3\u003eFits\u003c\/h3\u003e\n\u003cp\u003eEvery Revo coldside. 1.75 mm filament. Nozzle and heatbreak in one factory-assembled part, swapped cold by hand — no hot-tightening, no leaks. Not compatible with V6-style heater blocks. The 500 °C rating is the nozzle's; your hotside sets the real ceiling.\u003c\/p\u003e\n\u003ch3\u003eWhich one do you need?\u003c\/h3\u003e\n\u003cp\u003eFlow but not the extreme hardness: \u003ca href=\"\/products\/e3d-revo-high-flow-obxidian-nozzle\"\u003eHigh Flow ObXidian\u003c\/a\u003e, cheaper and good to 300 °C. Hardness but no need for speed: \u003ca href=\"\/products\/e3d-revo-obxidian-500-nozzle\"\u003eObXiDian 500\u003c\/a\u003e. Hot and abrasive rather than fast: \u003ca href=\"\/products\/e3d-revo-hta-nozzle\"\u003eHTA\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003eSkip 0.4 mm for heavily filled filament — the fibres are often close to the hole size. E3D part numbers RC-NOZZLE-HF-OBD-AS-0400 to -0800-SPK.\u003c\/p\u003e","brand":"E3D","offers":[{"title":"0.4 mm","offer_id":55037180641607,"sku":"E3D-RC-NOZZLE-HF-OBD-AS-0400-SPK","price":93.95,"currency_code":"EUR","in_stock":true},{"title":"0.6 mm","offer_id":55037180674375,"sku":"E3D-RC-NOZZLE-HF-OBD-AS-0600-SPK","price":93.95,"currency_code":"EUR","in_stock":true},{"title":"0.8 mm","offer_id":55037180707143,"sku":"E3D-RC-NOZZLE-HF-OBD-AS-0800-SPK","price":93.95,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0878\/0575\/5719\/files\/e3d-revo-high-flow-obxidian-500-nozzle-04-to-08-mm-6042143.png?v=1789516642"},{"product_id":"e3d-revo-high-flow-hta-nozzle","title":"E3D Revo High Flow HTA Nozzle — 0.4 to 1.4 mm","description":"\u003cp\u003eHigh temperature, high flow and abrasion-resistant in one nozzle. Hardened steel tip on a copper carrier and spreader, chromium-nitride coated for wear resistance and non-stick, with E3D's high-flow internal geometry on top — so hot abrasive filament goes through faster instead of slower.\u003c\/p\u003e\n\u003cp\u003eThe flow geometry unlocks 0.4, 0.6 and 0.8 mm at higher rates and adds 1.0, 1.2 and 1.4 mm, which is where this range gets interesting: big nozzles in a material that would normally chew through them.\u003c\/p\u003e\n\u003ch3\u003eFits\u003c\/h3\u003e\n\u003cp\u003eEvery Revo coldside, and the form factor is identical to a standard Revo nozzle so your mount and fan duct stay as they are. 1.75 mm filament. Nozzle and heatbreak in one factory-assembled part, swapped cold by hand. Not compatible with V6-style heater blocks, and re-check your Z offset after a swap.\u003c\/p\u003e\n\u003ch3\u003eAbout that 500 °C\u003c\/h3\u003e\n\u003cp\u003eIt is the nozzle's rating. On a 40 W or 60 W HeaterCore you are capped at 300 °C — to actually print that hot you need a Revo High Temperature hotside.\u003c\/p\u003e\n\u003ch3\u003eWhich one?\u003c\/h3\u003e\n\u003cp\u003eNo need for the big sizes or the heat: \u003ca href=\"\/products\/e3d-revo-hta-nozzle\"\u003eHTA\u003c\/a\u003e, cheaper. Abrasive but not hot: \u003ca href=\"\/products\/e3d-revo-high-flow-obxidian-nozzle\"\u003eHigh Flow ObXidian\u003c\/a\u003e. Hardest of all: \u003ca href=\"\/products\/e3d-revo-high-flow-obxidian-500-nozzle\"\u003eHigh Flow ObXiDian 500\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003eGrey, with the size engraved. Skip 0.4 mm for heavily filled filament. E3D part numbers RC-NOZZLE-HF-HTA-0400 to -1400-AS-SPK.\u003c\/p\u003e","brand":"E3D","offers":[{"title":"0.4 mm","offer_id":55037181591879,"sku":"E3D-RC-NOZZLE-HF-HTA-0400-AS-SPK","price":82.95,"currency_code":"EUR","in_stock":true},{"title":"0.6 mm","offer_id":55037181624647,"sku":"E3D-RC-NOZZLE-HF-HTA-0600-AS-SPK","price":82.95,"currency_code":"EUR","in_stock":true},{"title":"0.8 mm","offer_id":55037181657415,"sku":"E3D-RC-NOZZLE-HF-HTA-0800-AS-SPK","price":82.95,"currency_code":"EUR","in_stock":true},{"title":"1.0 mm","offer_id":55037181690183,"sku":"E3D-RC-NOZZLE-HF-HTA-1000-AS-SPK","price":82.95,"currency_code":"EUR","in_stock":true},{"title":"1.2 mm","offer_id":55037181722951,"sku":"E3D-RC-NOZZLE-HF-HTA-1200-AS-SPK","price":82.95,"currency_code":"EUR","in_stock":true},{"title":"1.4 mm","offer_id":55037181755719,"sku":"E3D-RC-NOZZLE-HF-HTA-1400-AS-SPK","price":82.95,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0878\/0575\/5719\/files\/e3d-revo-high-flow-hta-nozzle-04-to-14-mm-5060761.png?v=1789516643"},{"product_id":"e3d-revo-high-temperature-nozzle","title":"E3D Revo High Temperature Nozzle — Copper, 0.4 to 0.8 mm","description":"\u003cp\u003eA copper Revo nozzle with a copper spreader for the best possible heat transfer, finished in chromium nitride for corrosion resistance and a non-stick surface. Rated to 500 °C — this is the nozzle for engineering polymers like PEEK and PEI, where the temperature is the problem rather than the filler.\u003c\/p\u003e\n\u003cp\u003eCopper moves heat better than brass or steel, which is what lets it hold temperature at the tip when you are running near the top of the range.\u003c\/p\u003e\n\u003ch3\u003eRead this before you buy\u003c\/h3\u003e\n\u003cp\u003eThe 500 °C is the nozzle's rating, not your printer's. On a 40 W or 60 W HeaterCore you are limited to 300 °C, and you need a Revo High Temperature hotside to go higher. If you are buying this for PEEK, budget for the hotside too.\u003c\/p\u003e\n\u003ch3\u003eFits\u003c\/h3\u003e\n\u003cp\u003eEvery Revo coldside. 1.75 mm filament. Nozzle and heatbreak in one factory-assembled part — no hot-tightening, no leaks, swapped cold by hand. Not compatible with V6-style heater blocks.\u003c\/p\u003e\n\u003ch3\u003ePrinting abrasives too?\u003c\/h3\u003e\n\u003cp\u003eThen this is the wrong one — bare copper wears fast on filled filament. Take the \u003ca href=\"\/products\/e3d-revo-hta-nozzle\"\u003eHTA\u003c\/a\u003e, which is the same temperature rating with a hardened steel tip.\u003c\/p\u003e\n\u003cp\u003eGrey, with the size engraved. E3D part numbers RC-NOZZLE-HT-AS-0400 to -0800-SPK.\u003c\/p\u003e","brand":"E3D","offers":[{"title":"0.4 mm","offer_id":55037182083399,"sku":"E3D-RC-NOZZLE-HT-AS-0400-SPK","price":56.95,"currency_code":"EUR","in_stock":true},{"title":"0.6 mm","offer_id":55037182116167,"sku":"E3D-RC-NOZZLE-HT-AS-0600-SPK","price":56.95,"currency_code":"EUR","in_stock":true},{"title":"0.8 mm","offer_id":55037182148935,"sku":"E3D-RC-NOZZLE-HT-AS-0800-SPK","price":56.95,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0878\/0575\/5719\/files\/e3d-revo-high-temperature-nozzle-copper-04-to-08-mm-1179882.png?v=1789516633"},{"product_id":"e3d-revo-silicone-socks","title":"E3D Revo Silicone Socks, 3-Pack — Colour-Coded by Nozzle Size","description":"\u003cp\u003eSilicone socks keep the heat where it belongs and stop molten plastic welding itself to your nozzle. On Revo they do one more thing: E3D gives every nozzle size its own colour, so you can see which nozzle is in the machine without pulling it out or squinting at the engraving.\u003c\/p\u003e\n\u003cp\u003eThe code: pink 0.15, yellow 0.25, red 0.4, blue 0.6, green 0.8, black 1.0, purple 1.2, orange 1.4. There is also a black sock for the HeaterCore, which is a different shape — that one is not a size, it's the other half of the hotend.\u003c\/p\u003e\n\u003cp\u003eThree per pack. They are a consumable: they tear eventually, they get a bit crusty, and a fresh one costs less than the print it saves.\u003c\/p\u003e\n\u003ch3\u003eFits\u003c\/h3\u003e\n\u003cp\u003eEvery Revo nozzle for the tip socks; the HeaterCore sock fits the Revo HeaterCore. Not for V6 or Volcano — different shape.\u003c\/p\u003e\n\u003cp\u003eE3D part numbers RC-SOCK-TIP-*-3PK and RC-SOCK-CORE-BLK-3PK.\u003c\/p\u003e","brand":"E3D","offers":[{"title":"Pink — 0.15 mm","offer_id":55037182542151,"sku":"E3D-RC-SOCK-TIP-PNK-3PK","price":5.95,"currency_code":"EUR","in_stock":true},{"title":"Yellow — 0.25 mm","offer_id":55037182574919,"sku":"E3D-RC-SOCK-TIP-YLW-3PK","price":5.95,"currency_code":"EUR","in_stock":true},{"title":"Red — 0.4 mm","offer_id":55037182607687,"sku":"E3D-RC-SOCK-TIP-RED-3PK","price":5.95,"currency_code":"EUR","in_stock":true},{"title":"Blue — 0.6 mm","offer_id":55037182640455,"sku":"E3D-RC-SOCK-TIP-BLU-3PK","price":5.95,"currency_code":"EUR","in_stock":true},{"title":"Green — 0.8 mm","offer_id":55037182673223,"sku":"E3D-RC-SOCK-TIP-GRN-3PK","price":5.95,"currency_code":"EUR","in_stock":true},{"title":"Black — 1.0 mm","offer_id":55037182705991,"sku":"E3D-RC-SOCK-TIP-BLK-3PK","price":5.95,"currency_code":"EUR","in_stock":true},{"title":"Purple — 1.2 mm","offer_id":55037182738759,"sku":"E3D-RC-SOCK-TIP-PUR-3PK","price":5.95,"currency_code":"EUR","in_stock":true},{"title":"Orange — 1.4 mm","offer_id":55037182771527,"sku":"E3D-RC-SOCK-TIP-ORA-3PK","price":5.95,"currency_code":"EUR","in_stock":true},{"title":"Black — HeaterCore","offer_id":55037182804295,"sku":"E3D-RC-SOCK-CORE-BLK-3PK","price":5.95,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0878\/0575\/5719\/files\/e3d-revo-silicone-socks-3-pack-colour-coded-by-nozzle-size-6907758.jpg?v=1789516652"},{"product_id":"e3d-revo-spring-3-pack","title":"E3D Revo Spring, 3-Pack","description":"\u003cp\u003eThe little spring that sits between the HeaterCore and the nozzle and keeps the two pressed together. It is what makes a Revo swap work without hot-tightening — and it is the part that goes missing on the bench, or gets tired after enough heat cycles.\u003c\/p\u003e\n\u003cp\u003eThree per pack. Keep a set in the drawer; the day you need one you really need one.\u003c\/p\u003e\n\u003ch3\u003eFits\u003c\/h3\u003e\n\u003cp\u003eEvery Revo HeaterCore. E3D part number RC-SPRING-3PACK.\u003c\/p\u003e","brand":"E3D","offers":[{"title":"Default Title","offer_id":55037182935367,"sku":"E3D-RC-SPRING-3PACK","price":3.95,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0878\/0575\/5719\/files\/e3d-revo-spring-3-pack-9083339.jpg?v=1789516636"},{"product_id":"isiks-tech-birds-nest-usb-toolchanger-hub","title":"Isik's Tech Birds' Nest USB Hub for Toolchanger 3D Printers","description":"\u003cp\u003eA USB hub for toolchangers that run a USB toolhead board on every tool. One Birds' Nest takes up to six toolheads and gives each one its own protected port, so you run six short cables to a single board instead of six long ones back to the Pi.\u003c\/p\u003e\u003cp\u003eIt runs its own Klipper MCU, so the filament sensors, thermistors and LEDs for each tool connect here too.\u003c\/p\u003e\u003ch3\u003eWhat's on the board\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eSTM32G0B1 MCU running Klipper over USB\u003c\/li\u003e\n\u003cli\u003e6× MX3.0 USB toolhead ports with MOSFET and diode protection\u003c\/li\u003e\n\u003cli\u003e6× 3-pin filament sensor ports, 4× thermistor ports, 2× 5V RGB LED ports\u003c\/li\u003e\n\u003cli\u003eUp to 20 A total to the toolheads\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eGood to know\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eWith 60 W or bigger hotends at 24 V, heat the tools one after another, not all at once.\u003c\/li\u003e\n\u003cli\u003eThe 5V LED outputs are for a few status LEDs, not LED strips.\u003c\/li\u003e\n\u003cli\u003eMX3.0 and XH connectors are included.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003ePre-order.\u003c\/strong\u003e I'm bringing this board in from Isik's Tech in the US. Expected to ship in 3–4 weeks. As soon as it lands in the Netherlands it goes out to you, and you pay no import fees or customs on top.\u003c\/p\u003e\u003cp\u003eDesigned and assembled by Isik's Tech. Docs: \u003ca href=\"https:\/\/docs.isiks.tech\/birds-nest\/usb\/manual\/\" target=\"_blank\" rel=\"noopener\"\u003ehttps:\/\/docs.isiks.tech\/birds-nest\/usb\/manual\/\u003c\/a\u003e\u003c\/p\u003e","brand":"Isik's Tech","offers":[{"title":"Default Title","offer_id":55040788955463,"sku":"BIRDS-NEST","price":65.95,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0878\/0575\/5719\/files\/922B9E61-AE4D-408A-89E9-31DB7FE31618.jpg?v=1789549444"},{"product_id":"isiks-tech-birds-nest-can-toolchanger-hub","title":"Isik's Tech Birds' Nest CAN Hub for Toolchanger 3D Printers","description":"\u003cp\u003eThe CAN version of the Birds' Nest, for toolchangers with a CAN toolhead board on each tool. It doubles as your USB-to-CAN bridge and lays the bus out as a proper linear topology, which is the part most home-made CAN hubs get wrong.\u003c\/p\u003e\u003ch3\u003eWhat's on the board\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eSTM32G0B1 MCU running Klipper as USB-to-CAN bridge\u003c\/li\u003e\n\u003cli\u003e6× CAN toolhead ports plus expansion ports for more CAN devices\u003c\/li\u003e\n\u003cli\u003e6× 4-pin filament sensor ports, 6× thermistor ports, 2× 5V ARGB ports\u003c\/li\u003e\n\u003cli\u003eUp to 30 A total to the toolheads\u003c\/li\u003e\n\u003cli\u003e120 Ω termination jumpers, max stub length 300 mm\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eGood to know\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eBuilt for 6-wire umbilicals (two twisted CAN pairs plus power), such as Igus CF113-018-D. A 4-wire mode exists but is less reliable.\u003c\/li\u003e\n\u003cli\u003eMX3.0 and XH connectors are included.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003ePre-order.\u003c\/strong\u003e I'm bringing this board in from Isik's Tech in the US. Expected to ship in 3–4 weeks. As soon as it lands in the Netherlands it goes out to you, and you pay no import fees or customs on top.\u003c\/p\u003e\u003cp\u003eDesigned and assembled by Isik's Tech. Docs: \u003ca href=\"https:\/\/docs.isiks.tech\/birds-nest\/can\/manual\/\" target=\"_blank\" rel=\"noopener\"\u003ehttps:\/\/docs.isiks.tech\/birds-nest\/can\/manual\/\u003c\/a\u003e\u003c\/p\u003e","brand":"Isik's Tech","offers":[{"title":"Default Title","offer_id":55040790757703,"sku":"BN-CAN","price":54.95,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0878\/0575\/5719\/files\/B78227BE-ECF2-4055-84C3-C3ACC178F90D.jpg?v=1789549507"},{"product_id":"isiks-tech-moar-can-hub","title":"Isik's Tech MOAR_CAN 8\/9 Port CAN Hub, Linear Bus Topology","description":"\u003cp\u003eWhen a printer has more CAN devices than your adapter has ports (a toolchanger, an IDEX, a Box Turtle on the same bus), MOAR_CAN gives you the extra ports without turning the bus into a star. It keeps the linear topology that 1 Mbit CAN wants.\u003c\/p\u003e\u003ch3\u003eSpecs\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e6-pin MX3.0 hub ports, plus a 4-pin MX3.0 aux\/power port (10.5 A max)\u003c\/li\u003e\n\u003cli\u003eXH input from your USB\/CAN adapter, power in through a screw terminal\u003c\/li\u003e\n\u003cli\u003e24 A total, 10.5 A max per device, max stub length 300 mm\u003c\/li\u003e\n\u003cli\u003e120 Ω termination jumper\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWorks with\u003c\/h3\u003e\u003cp\u003eToqueCAN, PiCAN and other USB\/CAN adapters. When you use it with a ToqueCAN, leave the MOAR_CAN termination jumper off. Jumpers, MX3.0 and XH connectors and pins are included.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003ePre-order.\u003c\/strong\u003e I'm bringing this board in from Isik's Tech in the US. Expected to ship in 3–4 weeks. As soon as it lands in the Netherlands it goes out to you, and you pay no import fees or customs on top.\u003c\/p\u003e\u003cp\u003eDesigned and assembled by Isik's Tech. Docs: \u003ca href=\"https:\/\/docs.isiks.tech\/moar-can\/manual\/\" target=\"_blank\" rel=\"noopener\"\u003ehttps:\/\/docs.isiks.tech\/moar-can\/manual\/\u003c\/a\u003e\u003c\/p\u003e","brand":"Isik's Tech","offers":[{"title":"Default Title","offer_id":55040790790471,"sku":"MOAR-CAN","price":24.95,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0878\/0575\/5719\/files\/0C80AACC-02D3-4C9F-AA76-AC1FE80FAB50.jpg?v=1789549508"},{"product_id":"isiks-tech-toquecan-raspberry-pi-can-usb","title":"Isik's Tech ToqueCAN for Raspberry Pi: 2× CAN, 3-Port USB Hub, 24V to 5V 5A","description":"\u003cp\u003eToqueCAN sits on top of a Raspberry Pi 4 or 5 and takes care of the three things every CAN printer build needs around the Pi: a CAN adapter, a USB hub, and a proper 24 V to 5 V supply to power the Pi. That saves you a separate U2C board, a buck converter and a pile of wiring in a small electronics bay.\u003c\/p\u003e\u003ch3\u003eWhat's on the board\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eSTM32F072 MCU with 2× Micro-Fit CAN ports and termination jumpers, runs Klipper (bridge mode recommended) or Candlelight\u003c\/li\u003e\n\u003cli\u003e3-port USB hub (USB2514)\u003c\/li\u003e\n\u003cli\u003e24 V to 5 V 5 A regulator powering the Pi and USB devices, 10 A fuse, 8 A max through the CAN ports\u003c\/li\u003e\n\u003cli\u003eMount for a 30 or 40 mm Pi fan with PWM, fan voltage 5 V or 24 V\u003c\/li\u003e\n\u003cli\u003eNeopixel output, GPIO passthrough, MOAR_CAN expansion connector\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eIn the box\u003c\/h3\u003e\u003cp\u003eToqueCAN PCB, M2.5 standoffs, screws and threaded inserts, JST-XH and MX3.0 connectors, jumpers and a 180° USB adapter. Not included: fan, printed fan mount, USB cable. There's no EEPROM, so the Pi won't detect it as an official HAT. That doesn't affect how it works.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003ePre-order.\u003c\/strong\u003e I'm bringing this board in from Isik's Tech in the US. Expected to ship in 3–4 weeks. As soon as it lands in the Netherlands it goes out to you, and you pay no import fees or customs on top.\u003c\/p\u003e\u003cp\u003eDesigned and assembled by Isik's Tech. Docs: \u003ca href=\"https:\/\/docs.isiks.tech\/toquecan\/manual\/\" target=\"_blank\" rel=\"noopener\"\u003ehttps:\/\/docs.isiks.tech\/toquecan\/manual\/\u003c\/a\u003e\u003c\/p\u003e","brand":"Isik's Tech","offers":[{"title":"Default Title","offer_id":55040790823239,"sku":"TOQUECAN","price":75.95,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0878\/0575\/5719\/files\/4430DA61-698A-4086-BFA4-32B3AE2D7953.jpg?v=1789549510"},{"product_id":"isiks-tech-afc-lite-box-turtle-controller","title":"Isik's Tech AFC-Lite Controller PCB for Box Turtle","description":"\u003cp\u003eThe controller board made for Armored Turtle's Box Turtle automated filament changer. One board runs all four lanes: steppers for the extruders, brushed DC drivers for the N20 respooler motors, and all the endstops and LEDs.\u003c\/p\u003e\u003ch3\u003eWhat's on the board\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eSTM32H723 MCU, USB-C and CAN (1 Mbit), 24 V in via MX3.0\u003c\/li\u003e\n\u003cli\u003e4× stepstick slots for TMC2209\u003c\/li\u003e\n\u003cli\u003e4× brushed DC motor drivers\u003c\/li\u003e\n\u003cli\u003e12× endstop ports, 4× RGB LED ports, 1× 5 V fan port (always on)\u003c\/li\u003e\n\u003cli\u003eKlipper with Katapult bootloader, works with the AFC Klipper Add-On\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eGood to know\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eStepsticks are not included. SPI stepsticks only run in STEP\/DIR mode.\u003c\/li\u003e\n\u003cli\u003eDon't put a Cartographer v3 probe on the same CAN bus (v4 is fine).\u003c\/li\u003e\n\u003cli\u003eMX3.0 and XH connectors are included.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003ePre-order.\u003c\/strong\u003e I'm bringing this board in from Isik's Tech in the US. Expected to ship in 3–4 weeks. As soon as it lands in the Netherlands it goes out to you, and you pay no import fees or customs on top.\u003c\/p\u003e\u003cp\u003eDesigned and assembled by Isik's Tech. Docs: \u003ca href=\"https:\/\/docs.isiks.tech\/box-turtle\/afc-lite\/manual\/\" target=\"_blank\" rel=\"noopener\"\u003ehttps:\/\/docs.isiks.tech\/box-turtle\/afc-lite\/manual\/\u003c\/a\u003e\u003c\/p\u003e","brand":"Isik's Tech","offers":[{"title":"Default Title","offer_id":55040790856007,"sku":"AFC-Lite","price":79.95,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0878\/0575\/5719\/files\/EC465E98-5802-4287-A348-ED98AF697D6C.jpg?v=1789549510"},{"product_id":"isiks-tech-owlfc-mini-night-owl-controller","title":"Isik's Tech OwlFC-Mini Controller for Night Owl Filament Changer","description":"\u003cp\u003eIsik's new controller for the Night Owl automatic filament changer. It's small enough to live inside the unit and runs both extruder steppers, all the switches and the LEDs from one board over CAN or USB.\u003c\/p\u003e\u003ch3\u003eWhat's on the board\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eSTM32G0B1 MCU, CAN and USB with a MUX\u003c\/li\u003e\n\u003cli\u003e2× TMC2209 stepper drivers for the extruders\u003c\/li\u003e\n\u003cli\u003e7× internal and 2× external switch ports\u003c\/li\u003e\n\u003cli\u003eARGB LED output, optional fan port (always on)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eGood to know\u003c\/h3\u003e\u003cp\u003eFor a USB connection you also need the Isik's Tech USB Toolhead Adapter, which I sell separately.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003ePre-order.\u003c\/strong\u003e The OwlFC-Mini is brand new and Isik's first batch ships in late September. Expected to ship from the Netherlands in 3–4 weeks. No import fees or customs on top.\u003c\/p\u003e\u003cp\u003eDesigned and assembled by Isik's Tech.\u003c\/p\u003e","brand":"Isik's Tech","offers":[{"title":"Default Title","offer_id":55040795148615,"sku":"OWLFC-MINI","price":59.95,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0878\/0575\/5719\/files\/478D2F0A-880C-4C46-BE76-A311D7891607.jpg?v=1789549569"},{"product_id":"isiks-tech-nevermore-stealthmax-mini-pcb","title":"Isik's Tech Nevermore Stealthmax \u0026 Mini Controller PCB (V1), CAN\/USB","description":"\u003cp\u003eA small Klipper controller for a Nevermore Mini or Stealthmax V1 filter. It gives the filter its own fan control and air-quality readings over CAN or USB, so you don't have to find spare pins on your main board.\u003c\/p\u003e\u003ch3\u003eWhat's on the board\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eSTM32G0B1 MCU, Klipper over CAN or vertical Micro-B USB\u003c\/li\u003e\n\u003cli\u003e1× 4-pin PWM fan output\u003c\/li\u003e\n\u003cli\u003e2× I2C sensor ports, 1× LED port, 1× CAN port\u003c\/li\u003e\n\u003cli\u003eSeparate 12–24 V supply, JST-PH connectors and pins included\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003ePick your version\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eWith BME280 \u0026amp; SGP40 sensors\u003c\/strong\u003e: comes with the sensors, so you get VOC and temperature readings in Klipper straight away.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNo sensors\u003c\/strong\u003e: board only.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eGood to know\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eOnly works with 4-wire PWM fans. 2- and 3-wire fans won't work.\u003c\/li\u003e\n\u003cli\u003eFor Nevermore Mini and Stealthmax V1. Building a Stealthmax V2? Get the Stealthmax PCB 3.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003ePre-order.\u003c\/strong\u003e I'm bringing this board in from Isik's Tech in the US. Expected to ship in 3–4 weeks. As soon as it lands in the Netherlands it goes out to you, and you pay no import fees or customs on top.\u003c\/p\u003e\u003cp\u003eDesigned and assembled by Isik's Tech. Docs: \u003ca href=\"https:\/\/docs.isiks.tech\/nevermore\/controller\/\" target=\"_blank\" rel=\"noopener\"\u003ehttps:\/\/docs.isiks.tech\/nevermore\/controller\/\u003c\/a\u003e\u003c\/p\u003e","brand":"Isik's Tech","offers":[{"title":"With BME280 \u0026 SGP40 sensors","offer_id":55040795181383,"sku":"NM-SM-SENS","price":59.95,"currency_code":"EUR","in_stock":true},{"title":"No sensors","offer_id":55040795214151,"sku":"NM-SM","price":28.95,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0878\/0575\/5719\/files\/FullSizeRender.jpg?v=1789549570"},{"product_id":"isiks-tech-nevermore-stealthmax-pcb-3","title":"Isik's Tech Nevermore Stealthmax PCB 3 for Stealthmax V2, CAN\/USB-C","description":"\u003cp\u003eThe controller for a Nevermore Stealthmax V2. Everything the V2 can do runs from this one board in Klipper: the fan, the servo that closes the vent, a Peltier or heater, UV LEDs and the air-quality sensors.\u003c\/p\u003e\u003ch3\u003eWhat's on the board\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eSTM32G0B1 MCU, Klipper over CAN or USB-C\u003c\/li\u003e\n\u003cli\u003e24 V (VIN) 4-pin PWM fan output\u003c\/li\u003e\n\u003cli\u003e2× I2C sensor ports for SGP40\/BME280\u003c\/li\u003e\n\u003cli\u003e3× thermistor ports plus an onboard thermistor\u003c\/li\u003e\n\u003cli\u003ePeltier MOSFET, constant-current UV LED driver, ARGB and servo outputs\u003c\/li\u003e\n\u003cli\u003eSlide switch for CAN termination, MX3.0 for power and CAN, 5 V buck converter\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eGood to know\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eThe sensor boards are sold separately, and you need two. See Nevermore Sensors.\u003c\/li\u003e\n\u003cli\u003eA CAN port cover (XT30 or MX3.0) is optional and makes the wiring plug-and-play.\u003c\/li\u003e\n\u003cli\u003eAll PH and MX3.0 connectors you need are included.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003ePre-order.\u003c\/strong\u003e Isik has this board on backorder until October, so expect it to ship from the Netherlands in 4–6 weeks. No import fees or customs on top.\u003c\/p\u003e\u003cp\u003eDesigned and assembled by Isik's Tech. Docs: \u003ca href=\"https:\/\/docs.isiks.tech\/Nevermore\/Controller\/\" target=\"_blank\" rel=\"noopener\"\u003ehttps:\/\/docs.isiks.tech\/Nevermore\/Controller\/\u003c\/a\u003e\u003c\/p\u003e","brand":"Isik's Tech","offers":[{"title":"Default Title","offer_id":55040795246919,"sku":"NM-SM3","price":69.95,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0878\/0575\/5719\/files\/3EB18A0B-BC56-45E0-9F9E-C05EB7414C47.jpg?v=1789549571"},{"product_id":"isiks-tech-nevermore-bme280-sgp40-sensor","title":"Isik's Tech BME280 \u0026 SGP40 Air Quality Sensor for Nevermore Filters","description":"\u003cp\u003eA tiny sensor board (10.6 × 10.6 mm) with a BME280 for temperature, humidity and pressure and an SGP40 for VOCs. Put one on the intake and one on the exhaust of your Nevermore and Klipper shows you how well the filter is working.\u003c\/p\u003e\u003ch3\u003eSpecs\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eBME280 + SGP40 on one board\u003c\/li\u003e\n\u003cli\u003e3.3 V, I2C\u003c\/li\u003e\n\u003cli\u003ePlugs into the sensor ports on the Stealthmax PCB 3 and the Stealthmax \u0026amp; Mini PCB\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eGood to know\u003c\/h3\u003e\u003cp\u003eThe Stealthmax PCB 3 uses two, one for intake and one for exhaust. The price is per sensor board.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003ePre-order.\u003c\/strong\u003e I'm bringing this board in from Isik's Tech in the US. Expected to ship in 3–4 weeks. As soon as it lands in the Netherlands it goes out to you, and you pay no import fees or customs on top.\u003c\/p\u003e\u003cp\u003eDesigned and assembled by Isik's Tech.\u003c\/p\u003e","brand":"Isik's Tech","offers":[{"title":"Default Title","offer_id":55040795279687,"sku":"NM-SENS","price":29.95,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0878\/0575\/5719\/files\/Naamloos_-_2025-05-01T171004.225.jpg?v=1789549571"},{"product_id":"isiks-tech-stealthmax-pcb-3-can-port-cover","title":"Isik's Tech Stealthmax PCB 3 CAN Port Cover, XT30 or MX3.0 Daisy Chain","description":"\u003cp\u003eA port cover for a Stealthmax V2 build with the PCB 3. It comes with the internal cable already crimped and soldered, so you plug it into the PCB 3 and close the lid. No crimping inside a cramped filter housing.\u003c\/p\u003e\u003ch3\u003ePick your connector\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eXT30 (2+2)\u003c\/strong\u003e: XT30 connector for power and CAN.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMX3.0 with daisy chain\u003c\/strong\u003e: Micro-Fit 3.0 connector with a daisy-chain port to carry the CAN bus on to the next device.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFits\u003c\/h3\u003e\u003cp\u003eNevermore Stealthmax V2 with the Isik's Tech Stealthmax PCB 3.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003ePre-order.\u003c\/strong\u003e I'm bringing these in from Isik's Tech in the US. Expected to ship in 3–4 weeks. As soon as they land in the Netherlands yours goes out to you, and you pay no import fees or customs on top.\u003c\/p\u003e\u003cp\u003eDesigned and assembled by Isik's Tech.\u003c\/p\u003e","brand":"Isik's Tech","offers":[{"title":"XT30 (2+2)","offer_id":55040797704519,"sku":"NM-SM3-XT30-PC","price":8.95,"currency_code":"EUR","in_stock":true},{"title":"MX3.0 with daisy chain","offer_id":55040797737287,"sku":"NM-SM3-MX3.0-PC","price":9.95,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0878\/0575\/5719\/files\/Stealthmax3MX3.0PCPhoto.jpg?v=1789549624"},{"product_id":"isiks-tech-jst-xh-fan-splitter","title":"Isik's Tech 2-Pin JST-XH Fan Splitter, 1 to 3","description":"\u003cp\u003eA tiny PCB that turns one 2-pin JST-XH fan output into three. Handy when your board has fewer fan ports than your electronics bay has fans.\u003c\/p\u003e\u003ch3\u003eSpecs\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e4× 2-pin JST-XH connectors: 1 in, 3 out\u003c\/li\u003e\n\u003cli\u003e4 male connector housings with pins included\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eGood to know\u003c\/h3\u003e\u003cp\u003eIt splits power only, so there's no tach or PWM signal. Every fan on the splitter runs at the same speed.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003ePre-order.\u003c\/strong\u003e I'm bringing this board in from Isik's Tech in the US. Expected to ship in 3–4 weeks. As soon as it lands in the Netherlands it goes out to you, and you pay no import fees or customs on top.\u003c\/p\u003e\u003cp\u003eDesigned and assembled by Isik's Tech.\u003c\/p\u003e","brand":"Isik's Tech","offers":[{"title":"Default Title","offer_id":55040797802823,"sku":"XH-SPLIT","price":5.95,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0878\/0575\/5719\/files\/il_1140xN.5154992446_27jk.jpg?v=1789549625"},{"product_id":"isiks-tech-usb-toolhead-adapter","title":"Isik's Tech USB Adapter for Toolhead Boards","description":"\u003cp\u003eLets you run a USB toolhead board (or a board like the OwlFC-Mini) over a single umbilical to your Raspberry Pi, instead of setting up CAN. It uses the same protection circuit as the Birds' Nest USB hub.\u003c\/p\u003e\u003ch3\u003eWorks with\u003c\/h3\u003e\u003cp\u003eUSB toolhead boards and the OwlFC-Mini in USB mode.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003ePre-order.\u003c\/strong\u003e I'm bringing this board in from Isik's Tech in the US. Expected to ship in 3–4 weeks. As soon as it lands in the Netherlands it goes out to you, and you pay no import fees or customs on top.\u003c\/p\u003e\u003cp\u003eDesigned and assembled by Isik's Tech.\u003c\/p\u003e","brand":"Isik's Tech","offers":[{"title":"Default Title","offer_id":55040797901127,"sku":"USB-ADAPTER","price":9.95,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0878\/0575\/5719\/files\/1C5D28EC-AE0A-4B67-B03A-C7A696FCB3A2.jpg?v=1789549626"},{"product_id":"isiks-tech-hedgehog-klipper-io-expander","title":"Isik's Tech Hedgehog CAN\/USB Klipper I\/O Expander, 31 Pins","description":"\u003cp\u003eOut of pins on your main board? Hedgehog adds 31 I\/O pins to Klipper over CAN or USB. Each pin sits on a standard 2.54 mm header with its own 3.3 V and GND pair next to it, so a switch, sensor or relay plugs in without a breadboard.\u003c\/p\u003e\u003ch3\u003eWhat's on the board\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eSTM32G0B1 MCU, built-in CAN transceiver plus USB\u003c\/li\u003e\n\u003cli\u003e31 I\/O pins on 2.54 mm headers, 3.3 V\/GND beside each\u003c\/li\u003e\n\u003cli\u003ePull-ups and protection for 3 thermistors\u003c\/li\u003e\n\u003cli\u003e24 V input with onboard 3.3 V and 5 V regulators, 120 Ω CAN termination jumper\u003c\/li\u003e\n\u003cli\u003eKlipper with Katapult support; also runs STM32Duino\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003ePick your version\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSoldered\u003c\/strong\u003e: pin headers already soldered on.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNot soldered\u003c\/strong\u003e: bare board, solder only the headers you need.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eGood to know\u003c\/h3\u003e\u003cp\u003eThe pins have no preset functions. You configure every one yourself in Klipper, and some SPI pins aren't supported by Klipper.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003ePre-order.\u003c\/strong\u003e I'm bringing this board in from Isik's Tech in the US. Expected to ship in 3–4 weeks. As soon as it lands in the Netherlands it goes out to you, and you pay no import fees or customs on top.\u003c\/p\u003e\u003cp\u003eDesigned and assembled by Isik's Tech. Docs: \u003ca href=\"https:\/\/docs.isiks.tech\/hedgehog\/manual\/\" target=\"_blank\" rel=\"noopener\"\u003ehttps:\/\/docs.isiks.tech\/hedgehog\/manual\/\u003c\/a\u003e\u003c\/p\u003e","brand":"Isik's Tech","offers":[{"title":"Soldered","offer_id":55040797933895,"sku":"HEDGEHOG-SOLDERED","price":30.95,"currency_code":"EUR","in_stock":true},{"title":"Not soldered","offer_id":55040797966663,"sku":"HEDGEHOG-NOPINS","price":25.95,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0878\/0575\/5719\/files\/59F14A12-C12B-4814-A7FF-41951CCED74D.jpg?v=1789549626"},{"product_id":"bigtreetech-ebb36-can-v1-2-toolhead-board-stm32g0b1-max31865","title":"BIGTREETECH EBB36 CAN V1.2 Toolhead Board — STM32G0B1, MAX31865","description":"\u003cp\u003eA proven CAN toolhead board for Klipper printers. The EBB36 bolts to the back of a 36 mm pancake extruder motor and runs the extruder, hotend heater, thermistor, fans, probe and LEDs from one board, so the umbilical to your toolhead shrinks to power plus two data wires. It talks to Klipper over CAN or USB.\u003c\/p\u003e\n\u003cp\u003eThis is the V1.2 with the STM32G0B1 chip and the MAX31865 on board, so it reads PT100 and PT1000 sensors directly as well as regular 100K NTC thermistors. An ADXL345 accelerometer is built in for input shaping, so no separate sensor on the toolhead.\u003c\/p\u003e\n\u003ch3\u003eSpecs\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eMCU: ARM Cortex-M0+ STM32G0B1CBT6, 64 MHz\u003c\/li\u003e\n\u003cli\u003eInput: 12–24 V DC, 6 A\u003c\/li\u003e\n\u003cli\u003eStepper driver: TMC2209 on board\u003c\/li\u003e\n\u003cli\u003eHeater output (E0): 5 A max\u003c\/li\u003e\n\u003cli\u003eFans: 2 × PWM outputs (FAN0, FAN1), 1 A, 1.5 A peak\u003c\/li\u003e\n\u003cli\u003eTemperature: 1 × 100K NTC or PT1000 (TH0), 1 × PT100\/PT1000 via MAX31865, 2- or 4-wire\u003c\/li\u003e\n\u003cli\u003eAccelerometer: ADXL345\u003c\/li\u003e\n\u003cli\u003eCommunication: CAN or USB, 120 Ω CAN termination selectable by jumper\u003c\/li\u003e\n\u003cli\u003eSize: 51.5 × 37 mm, 2 × M3 mounting holes at 43.85 mm spacing\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eGood to know\u003c\/h3\u003e\n\u003cp\u003eFor CAN you need either a USB-to-CAN adapter or a mainboard that can act as a CAN bridge, such as the Manta M8P. Boot and reset buttons let you flash Klipper over USB in DFU mode. Protection is built in on the thermistor input, heater and fan outputs (flyback diodes) and power input (reverse polarity). Wiring diagrams and sample Klipper configs are on \u003ca href=\"https:\/\/github.com\/bigtreetech\/EBB\" rel=\"noopener\"\u003eBIGTREETECH's EBB GitHub\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePre-order.\u003c\/strong\u003e I'm bringing this board in directly from BIGTREETECH. Expected to ship in 3–4 weeks. As soon as it lands in the Netherlands it goes out to you, and you pay no import fees or customs on top.\u003c\/p\u003e\n\u003cp\u003eBIGTREETECH part number 1030000175.\u003c\/p\u003e","brand":"BIGTREETECH","offers":[{"title":"Default Title","offer_id":55056298180935,"sku":"1030000175","price":33.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0878\/0575\/5719\/files\/EBB-36_7899172f-17a5-4310-8807-74e88e0aac27.jpg?v=1789641974"},{"product_id":"bigtreetech-ebb36-gen2-v1-0-toolhead-board-can-usb-tacho-fan-lis2dw","title":"BIGTREETECH EBB36 Gen2 V1.0 Toolhead Board — CAN\/USB, Tacho Fan, LIS2DW","description":"\u003cp\u003eBIGTREETECH's second-generation EBB36, rebuilt around the things that kill toolhead boards: nearly every input and output is protected against wiring mistakes, and it's tested in chambers up to 75 °C. It mounts on a 36 mm pancake extruder motor and runs the extruder, heater, thermistor, fans, probe and LEDs over a single CAN or USB connection to Klipper.\u003c\/p\u003e\n\u003cp\u003eSwitching between CAN and USB is one jumper, and the passthrough port follows along. The hotend fan header reads tacho, so Klipper can stop a print if that fan dies. Every fan output lets you pick 5 V or 24 V, and a dedicated thermistor watches the stepper driver's temperature.\u003c\/p\u003e\n\u003ch3\u003eSpecs\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eMCU: ARM Cortex-M0+ STM32G0B1CBT6, 64 MHz\u003c\/li\u003e\n\u003cli\u003eInput: 24–28 V DC (not for 12 V printers)\u003c\/li\u003e\n\u003cli\u003eStepper driver: TMC2209 on board\u003c\/li\u003e\n\u003cli\u003eHeater output: 120 W (24 V \/ 5 A)\u003c\/li\u003e\n\u003cli\u003eFans: 2 × 2-pin PWM (FAN0, FAN1), 1 × 3-pin with tacho (FAN2), 5 V\/24 V selectable; 1 A total, 1.5 A peak\u003c\/li\u003e\n\u003cli\u003e5 V output: 1.5 A peak\u003c\/li\u003e\n\u003cli\u003eThermistor: PT1000 or NTC\u003c\/li\u003e\n\u003cli\u003eAccelerometer: LIS2DW on board\u003c\/li\u003e\n\u003cli\u003eI²C port for sensors such as Eddy probes or chamber\/environment sensors\u003c\/li\u003e\n\u003cli\u003eConnectors: XT30 power, JST-XH motor and CAN, Molex heater terminals\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eGood to know\u003c\/h3\u003e\n\u003cp\u003eFor CAN you need a USB-to-CAN adapter or a mainboard that acts as a CAN bridge, such as the Manta M8P. Upgrading from an EBB36 V1.2? The Gen2 needs 24 V and has its own pinout and Klipper config, so check your wiring before you swap. Pinouts and sample configs are on \u003ca href=\"https:\/\/github.com\/bigtreetech\/EBB\/tree\/master\/EBB_GEN2\/EBB36_GEN2\" rel=\"noopener\"\u003eBIGTREETECH's GitHub\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePre-order.\u003c\/strong\u003e I'm bringing this board in directly from BIGTREETECH. Expected to ship in 3–4 weeks. As soon as it lands in the Netherlands it goes out to you, and you pay no import fees or customs on top.\u003c\/p\u003e\n\u003cp\u003eBIGTREETECH part number 1030000188.\u003c\/p\u003e","brand":"BIGTREETECH","offers":[{"title":"Default Title","offer_id":55056298770759,"sku":"1030000188","price":44.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0878\/0575\/5719\/files\/5_0703fee9-dbbd-4a54-b2b9-0c6984004426.jpg?v=1789641990"},{"product_id":"bigtreetech-tmc2209-v1-3-stepper-motor-driver-uart-sensorless-homing","title":"BIGTREETECH TMC2209 Stepper Motor Driver — UART, Sensorless Homing","description":"\u003cp\u003eThe quiet, dependable stepstick driver most Klipper boards are built around. Plug it into any board with standard stepstick sockets, such as the Manta M8P, Octopus or SKR, and run it in UART mode so Klipper sets current and microstepping from your config, no potentiometer tweaking.\u003c\/p\u003e\n\u003cp\u003eStealthChop2 keeps motors near silent at lower speeds, SpreadCycle takes over when you need torque, and StallGuard4 lets you home X and Y without endstop switches.\u003c\/p\u003e\n\u003ch3\u003eSpecs\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eChip: Trinamic TMC2209\u003c\/li\u003e\n\u003cli\u003eMotor voltage (VM): 4.75–28 V DC\u003c\/li\u003e\n\u003cli\u003eCurrent: 2.0 A RMS, 2.8 A peak\u003c\/li\u003e\n\u003cli\u003eMicrostepping: up to 1\/256 (MicroPlyer interpolation)\u003c\/li\u003e\n\u003cli\u003eModes: UART or STEP\/DIR\u003c\/li\u003e\n\u003cli\u003eFeatures: StealthChop2, SpreadCycle, StallGuard4, CoolStep\u003c\/li\u003e\n\u003cli\u003eSense resistor: 110 mΩ\u003c\/li\u003e\n\u003cli\u003eSize: 15.24 × 20.32 mm stepstick format\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eGood to know\u003c\/h3\u003e\n\u003cp\u003eSold per piece; order one for each motor. For 48 V or high-current motors, look at the TMC5160T Plus instead.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePre-order.\u003c\/strong\u003e I'm bringing these in directly from BIGTREETECH. Expected to ship in 3–4 weeks. As soon as they land in the Netherlands they go out to you, and you pay no import fees or customs on top.\u003c\/p\u003e\n\u003cp\u003eBIGTREETECH part number 1040000053.\u003c\/p\u003e","brand":"BIGTREETECH","offers":[{"title":"Default Title","offer_id":55056299426119,"sku":"1040000053","price":7.89,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0878\/0575\/5719\/files\/1_559a8099-e380-4d84-8920-7649c1ddf37b.jpg?v=1789642006"},{"product_id":"bigtreetech-tmc5160t-plus-stepper-driver-60-v-spi-without-heatsink-case","title":"BIGTREETECH TMC5160T Plus Stepper Driver — 60 V SPI, without Heatsink Case","description":"\u003cp\u003eA high-voltage stepper driver for when TMC2209s run out of headroom. Run your A\/B motors at 48 V and they hold torque at speeds where a 24 V setup starts skipping. It fits the high-voltage driver sockets on boards like the Manta M8P V2.0 and Octopus Pro, and Klipper controls it over SPI.\u003c\/p\u003e\n\u003cp\u003eThis is the Plus without the enclosed heatsink case: the same TMC5160-TA chip and eight separate high-power MOSFETs, in a smaller 58 × 50 × 28 mm package that fits tighter electronics bays.\u003c\/p\u003e\n\u003ch3\u003eSpecs\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eChip: Trinamic TMC5160-TA\u003c\/li\u003e\n\u003cli\u003eInput voltage (HVIN): 8–56 V (60 V max)\u003c\/li\u003e\n\u003cli\u003eCurrent: up to 10.6 A RMS, 15 A sine-wave peak\u003c\/li\u003e\n\u003cli\u003eMOSFETs: 8 × external, 100 V \/ 93 A, down to 6 mΩ\u003c\/li\u003e\n\u003cli\u003eSense resistor: 22 mΩ\u003c\/li\u003e\n\u003cli\u003eCapacitors: 2 × 560 µF\u003c\/li\u003e\n\u003cli\u003eModes: SPI or STEP\/DIR; StealthChop and SpreadCycle\u003c\/li\u003e\n\u003cli\u003e24 V always-on fan header for active cooling\u003c\/li\u003e\n\u003cli\u003eSize: 58 × 50 × 28 mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eGood to know\u003c\/h3\u003e\n\u003cp\u003eSold per piece. Check that your board's driver socket supports high voltage and SPI, and set its motor power jumper correctly before powering up: 48 V into a 24 V-only socket will destroy the board. Point a fan at it for sustained high current. Documentation is on \u003ca href=\"https:\/\/github.com\/bigtreetech\/BIGTREETECH-Stepper-Motor-Driver\" rel=\"noopener\"\u003eBIGTREETECH's GitHub\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePre-order.\u003c\/strong\u003e I'm bringing these in directly from BIGTREETECH. Expected to ship in 3–4 weeks. As soon as they land in the Netherlands they go out to you, and you pay no import fees or customs on top.\u003c\/p\u003e\n\u003cp\u003eBIGTREETECH part number 1050000072.\u003c\/p\u003e","brand":"BIGTREETECH","offers":[{"title":"Default Title","offer_id":55056300376391,"sku":"1050000072","price":23.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0878\/0575\/5719\/files\/TMC5160TPlus_Wocase_3.jpg?v=1789642019"},{"product_id":"bigtreetech-manta-m8p-v2-0-klipper-mainboard-stm32h723-8-motors-cb1-cm4","title":"BIGTREETECH Manta M8P V2.0 Klipper Mainboard — STM32H723, 8 Motors, CB1\/CM4","description":"\u003cp\u003eA Klipper mainboard with the Linux computer built in. The Manta M8P V2.0 has a socket for a BIGTREETECH CB1 or Raspberry Pi CM4 core board, so there's no separate Pi to mount, power and cable up. Eight motor outputs cover a Voron 2.4's four Z motors, A\/B and extruder with one to spare, and the fast STM32H723 handles it all without breaking a sweat.\u003c\/p\u003e\n\u003cp\u003eEach driver socket can run at 24 V or at high voltage up to 60 V, so you can put TMC5160s on A\/B at 48 V and keep TMC2209s elsewhere. A CAN port lets the board bridge straight to an EBB36 toolhead board.\u003c\/p\u003e\n\u003ch3\u003eSpecs\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eMCU: ARM Cortex-M7 STM32H723ZET6, 550 MHz\u003c\/li\u003e\n\u003cli\u003eBoard input: 12 V or 24 V DC; driver voltage 24 V or HV (24–60 V) selectable per socket\u003c\/li\u003e\n\u003cli\u003eMotors: 8 driver sockets (Motor 1–3 with dual outputs), SPI, UART or STEP\/DIR\u003c\/li\u003e\n\u003cli\u003eHeaters: heated bed 10 A (10.5 A peak), 4 × hotend heater 5.5 A (6 A peak)\u003c\/li\u003e\n\u003cli\u003eFans: 5 × 2-pin PWM, 2 × 4-pin PWM, 1 × Pi fan, 1 × always-on; 5\/12\/24 V selectable, 1 A each\u003c\/li\u003e\n\u003cli\u003eTemperature: 5 × 100K NTC inputs, 4 of which also take PT1000\u003c\/li\u003e\n\u003cli\u003eExpansion: CAN, BLTouch, servo, filament sensor, power-loss detection, PS-ON, I²C, RGB, SPI (for accelerometers), TFT, EXP\u003c\/li\u003e\n\u003cli\u003eCore board functions: 3 × USB 2.0, LAN, HDMI, DSI, CSI, 40-pin GPIO\u003c\/li\u003e\n\u003cli\u003eSize: 170 × 102.7 mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eGood to know\u003c\/h3\u003e\n\u003cp\u003eBoard only: no core board (CB1\/CM4) and no stepper drivers are included. HDMI, TFT35 SPI and USB camera work with the CB1; the CSI\/DSI ports only work with a CM4. Total current for heaters, drivers and fans must stay under 12 A. Manual, pinout and sample configs are on the \u003ca href=\"https:\/\/global.bttwiki.com\/M8P-V2_0.html\" rel=\"noopener\"\u003eBIGTREETECH wiki\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePre-order.\u003c\/strong\u003e I'm bringing this board in directly from BIGTREETECH. Expected to ship in 3–4 weeks. As soon as it lands in the Netherlands it goes out to you, and you pay no import fees or customs on top.\u003c\/p\u003e\n\u003cp\u003eBIGTREETECH part number 1020000442.\u003c\/p\u003e","brand":"BIGTREETECH","offers":[{"title":"Default Title","offer_id":55056301228359,"sku":"1020000442","price":84.38,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0878\/0575\/5719\/files\/MantaM8PV2_6.jpg?v=1789642034"},{"product_id":"tes-microflip-n20-motor-reverser-pcb-for-goose-belt-purger","title":"TES MicroFlip N20 Motor Reverser PCB for Goose Belt Purger","description":"\u003cp\u003eA thumb-sized board that goes between your controller and the N20 motor on a Goose Belt Purger. The protection parts the GBP docs ask for are already on the board, so you don't have to solder a diode, resistor and capacitor onto the motor leads. Belt running the wrong way? Flip the slide switch instead of re-crimping the wires.\u003c\/p\u003e\n\u003ch3\u003eSpecs\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eFor N20-size brushed DC gear motors, 3–12 V, up to 1 A\u003c\/li\u003e\n\u003cli\u003eDPDT slide switch that swaps both motor leads\u003c\/li\u003e\n\u003cli\u003eRC snubber on board against brush noise and voltage spikes\u003c\/li\u003e\n\u003cli\u003e2-pin JST-PH connector\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eIn the bag\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eMicroFlip PCB\u003c\/li\u003e\n\u003cli\u003e1× 2-pin JST-PH housing with 4 crimp pins (you need 2, the other 2 are spares)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eGood to know\u003c\/h3\u003e\n\u003cp\u003eThe board is rated for 12 V. If your fan outputs run at 24 V, take the motor power from a 12 V or 5 V output instead.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIn stock in the Netherlands.\u003c\/strong\u003e It ships from my workshop within 2–4 working days, no import fees or customs on top.\u003c\/p\u003e\n\u003cp\u003eDesigned by Tröndle Embedded Systems (TES) in Switzerland, open source under GPL-3.0.\u003c\/p\u003e","brand":"Tröndle Embedded Systems","offers":[{"title":"Default Title","offer_id":55059882967367,"sku":"TES-MICROFLIP","price":3.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0878\/0575\/5719\/files\/image.jpg?v=1789660151"},{"product_id":"delta-2510-hotend-fan-5v","title":"Delta 2510 Hotend Fan, 5V — ASB02505SHA-AY6B for Xol and A4T","description":"\u003cp\u003eThe 2510 hotend fan both the Xol and A4T BOMs ask for by name: Delta ASB02505SHA-AY6B, 5 V, 15,000 rpm, 25 x 25 x 10 mm, three wire leads. In a heated chamber nothing else in this size keeps up, and unlike the cheaper 2510s it is a true 10 mm thick, so the duct fits without slicer tricks.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eDelta Electronics ASB02505SHA-AY6B\u003c\/li\u003e\n\u003cli\u003e5 V DC — check that your toolhead board has 5 V on the fan header\u003c\/li\u003e\n\u003cli\u003e25 x 25 x 10 mm, 3 wire leads, no connector fitted\u003c\/li\u003e\n\u003cli\u003eFits the Xol, A4T and any other toolhead that uses a 2510 hotend fan\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eSold per fan. Shipped from the Netherlands.\u003c\/p\u003e","brand":"Delta Electronics","offers":[{"title":"Default Title","offer_id":55060434878791,"sku":"VRN-FAN-2510-DELTA","price":12.95,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0878\/0575\/5719\/files\/ASB02505SHA-AY6B_sml_4343d1ba-4439-4384-95ce-a2984fb2d40a.webp?v=1789671925"},{"product_id":"neopixel-rgbw-mini-button-pcb","title":"NeoPixel RGBW — Toolhead LEDs, 3-Pack","description":"\u003cp\u003eThe little round LED boards that light up a Voron toolhead: Adafruit NeoPixel RGBW mini button PCBs, SK6812, the same ones the Stealthburner, A4T, Dragon Burner and Rapid Burner LED harnesses are built from. Solder-pad version, so you cut your wires to the length your cowling needs.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSK6812 RGBW, 5 V, addressable — chain them with three wires\u003c\/li\u003e\n\u003cli\u003eSolder pads on the back, no connector fitted\u003c\/li\u003e\n\u003cli\u003eThree per pack: exactly one toolhead\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eWire and connectors are not included. Shipped from the Netherlands.\u003c\/p\u003e","brand":"Adafruit","offers":[{"title":"3-pack, one toolhead","offer_id":55060436189511,"sku":"VRN-LED-NP-3","price":3.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0878\/0575\/5719\/files\/MFG_4776_web_640x640_6060147a-d857-407d-88ef-90c2f26d753d.webp?v=1789671905"},{"product_id":"treed-pc-pbt-gf-filament-1-75-mm-750-g-anthracite-grey","title":"TreeD PC-PBT GF Filament, 1.75 mm 750 g — Anthracite Grey","description":"\u003cp\u003eTreeD's \"DimensionMaster\": a PC-PBT blend reinforced with high-quality glass fibre, made in Italy. The fibres are evenly mixed through the polymer, so parts come out stiff, dimensionally stable and with very little warping. A good pick for functional printer parts, brackets and anything that sits near heat, like Voron parts inside a heated chamber.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePre-order:\u003c\/strong\u003e first stock arrives this week and ships from the Netherlands as soon as it's in.\u003c\/p\u003e\n\u003ch3\u003eWhy PC-PBT GF\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eStiff: tensile modulus 8500 MPa, flexural modulus 7750 MPa\u003c\/li\u003e\n\u003cli\u003eHeat resistant to around 150 °C (ISO 306\/B120)\u003c\/li\u003e\n\u003cli\u003eLow warpage and low water absorption (0.15 %)\u003c\/li\u003e\n\u003cli\u003eGood chemical and impact resistance (notched Izod 10 kJ\/m²)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003ePrint settings\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eNozzle: 250–270 °C, minimum 0.4 mm. Glass fibre is abrasive, so use a hardened or wear-resistant nozzle.\u003c\/li\u003e\n\u003cli\u003eBed: 90 °C\u003c\/li\u003e\n\u003cli\u003ePart cooling fan: off\u003c\/li\u003e\n\u003cli\u003eSpeed: 30–60 mm\/s\u003c\/li\u003e\n\u003cli\u003eDrying: 85 °C for 2 hours before printing\u003c\/li\u003e\n\u003cli\u003eDon't leave filament parked in a hot nozzle for more than 20 minutes.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eMaterial: PC-PBT, glass-fibre reinforced\u003c\/li\u003e\n\u003cli\u003eDiameter: 1.75 mm\u003c\/li\u003e\n\u003cli\u003eNet weight: 750 g\u003c\/li\u003e\n\u003cli\u003eColour: Anthracite Grey (RAL 7016)\u003c\/li\u003e\n\u003cli\u003eDensity: 1.44 g\/cm³\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eValues from TreeD technical data sheet TDS 5042.\u003c\/p\u003e","brand":"TreeD Filaments","offers":[{"title":"Anthracite Grey (RAL 7016)","offer_id":55121012097351,"sku":"TREED-PCPBTGF-175-750-7016","price":49.95,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0878\/0575\/5719\/files\/109dc571-9a5c-4fac-8f7f-e3762c50ada6.png?v=1790072369"}],"url":"https:\/\/pjotr3dshop.com\/collections\/brands.oembed?page=2","provider":"Pjotr3DShop","version":"1.0","type":"link"}