{"title":"E3D Revo Nozzles","description":"\u003cp\u003eGenuine E3D Revo nozzles for any Revo hotend, including the Revo Voron coldside on a Stealthburner, Xol or A4T. The nozzle and heatbreak are one part, so you swap it by hand in seconds, cold, without re-tightening anything hot.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrass:\u003c\/strong\u003e the everyday nozzle for PLA, PETG, ABS and ASA\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHigh Flow:\u003c\/strong\u003e about 70% more flow in the same form factor, for fast profiles\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eObXidian \/ ObXiDian 500:\u003c\/strong\u003e abrasion-resistant coatings for CF, GF and other filled filaments\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHTA and High Temperature copper:\u003c\/strong\u003e for PEEK, PEI and other engineering materials\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eRevo nozzles are E3D-only; clones don't seal or heat the same way. All stock here comes through E3D's own trade channel and ships from the Netherlands.\u003c\/p\u003e","products":[{"product_id":"e3d-revo-nozzle-brass","title":"E3D Revo Nozzle, Brass — 0.15 to 0.8 mm","description":"\u003cp\u003eThe standard Revo nozzle: nozzle and heatbreak in one factory-assembled part, so you screw it into any Revo coldside by hand, cold, and print. No tools, no hot tightening, no leaks from a bad assembly. A swap takes under a minute.\u003c\/p\u003e\n\u003cp\u003eSizes 0.15, 0.25, 0.4, 0.6 and 0.8 mm. Each comes with a colour-coded silicone sock and the size engraved on the nozzle, so you can tell them apart in the drawer.\u003c\/p\u003e\n\u003ch3\u003eFits\u003c\/h3\u003e\n\u003cp\u003eEvery Revo coldside: Revo Voron, Six, Micro, CR, Hemera XS, the Prusa MK3 and Mini editions, Roto. Not compatible with V6-style heater blocks. 1.75 mm filament, 300 °C max, 13 mm diameter, 41 mm long.\u003c\/p\u003e\n\u003cp\u003eYou may need to re-set your Z offset after a swap. The 0.15 mm is a specialist nozzle that clogs more easily; read E3D's filament starter settings before you use it. Want more flow in the same shape? See the \u003ca href=\"\/products\/e3d-revo-high-flow-nozzle-brass\"\u003eRevo High Flow nozzle\u003c\/a\u003e. E3D part numbers RC-NOZZLE-0150 to RC-NOZZLE-0800-AS-SPK.\u003c\/p\u003e","brand":"E3D","offers":[{"title":"0.15 mm","offer_id":55033794691399,"sku":"E3D-RC-NOZZLE-0150-AS-SPK","price":26.95,"currency_code":"EUR","in_stock":true},{"title":"0.25 mm","offer_id":55033794724167,"sku":"E3D-RC-NOZZLE-0250-AS-SPK","price":26.95,"currency_code":"EUR","in_stock":true},{"title":"0.4 mm","offer_id":55033794756935,"sku":"E3D-RC-NOZZLE-0400-AS-SPK","price":26.95,"currency_code":"EUR","in_stock":true},{"title":"0.6 mm","offer_id":55033794789703,"sku":"E3D-RC-NOZZLE-0600-AS-SPK","price":26.95,"currency_code":"EUR","in_stock":true},{"title":"0.8 mm","offer_id":55033794822471,"sku":"E3D-RC-NOZZLE-0800-AS-SPK","price":26.95,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0878\/0575\/5719\/files\/e3d-revo-nozzle-brass-015-to-08-mm-2395261.png?v=1789516639"},{"product_id":"e3d-revo-high-flow-nozzle-brass","title":"E3D Revo High Flow Nozzle, Brass — 0.4 to 1.4 mm","description":"\u003cp\u003eSame size and shape as a standard Revo nozzle, so nothing on your toolhead changes, but with E3D's internal high-flow geometry: more surface area, better heat transfer, roughly 70 % more volumetric flow. Screw it in cold, by hand, and print faster or bigger.\u003c\/p\u003e\n\u003cp\u003eSizes 0.4, 0.6, 0.8, 1.0, 1.2 and 1.4 mm. The nozzle is engraved with its size and \"HF\", and the high-flow insert shows as a circle on the tip.\u003c\/p\u003e\n\u003ch3\u003eFits\u003c\/h3\u003e\n\u003cp\u003eRevo Voron, Six, Micro, CR, Hemera XS, Prusa MK3 and Mini editions, Roto, MicroSwiss NG and Biqu H2 V2. 1.75 mm filament, 300 °C max, 24 V. A 40 W HeaterCore works for most materials; for polycarbonate and other hot filaments the 60 W core gets the most out of it. Not compatible with V6-style heater blocks.\u003c\/p\u003e\n\u003cp\u003eYou may need to re-set your Z offset after a swap. E3D's measured flow rates per size and material are in its \u003ca href=\"https:\/\/e3d-online.com\/blogs\/help-centre\/revo-nozzle-maximum-flow-rates\" rel=\"noopener\"\u003eflow rate documentation\u003c\/a\u003e. E3D part numbers RC-NOZZLE-HF-0400 to RC-NOZZLE-HF-1400-AS-SPK.\u003c\/p\u003e","brand":"E3D","offers":[{"title":"0.4 mm","offer_id":55033803440455,"sku":"E3D-RC-NOZZLE-HF-0400-AS-SPK","price":47.95,"currency_code":"EUR","in_stock":true},{"title":"0.6 mm","offer_id":55033803473223,"sku":"E3D-RC-NOZZLE-HF-0600-AS-SPK","price":47.95,"currency_code":"EUR","in_stock":true},{"title":"0.8 mm","offer_id":55033803505991,"sku":"E3D-RC-NOZZLE-HF-0800-AS-SPK","price":47.95,"currency_code":"EUR","in_stock":true},{"title":"1.0 mm","offer_id":55033803538759,"sku":"E3D-RC-NOZZLE-HF-1000-AS-SPK","price":47.95,"currency_code":"EUR","in_stock":true},{"title":"1.2 mm","offer_id":55033803571527,"sku":"E3D-RC-NOZZLE-HF-1200-AS-SPK","price":47.95,"currency_code":"EUR","in_stock":true},{"title":"1.4 mm","offer_id":55033803604295,"sku":"E3D-RC-NOZZLE-HF-1400-AS-SPK","price":47.95,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0878\/0575\/5719\/files\/e3d-revo-high-flow-nozzle-brass-04-to-14-mm-8060027.jpg?v=1789516641"},{"product_id":"e3d-revo-obxidian-nozzle","title":"E3D Revo ObXidian Nozzle — Abrasion-Resistant, 0.25 to 0.8 mm","description":"\u003cp\u003eE3D's hardest Revo nozzle: a tool-steel tip with the E3DLC coating on a copper-alloy body. It shrugs off the carbon- and glass-filled filament that eats brass, and because the body conducts heat like brass you keep your existing slicer profiles. The coating is non-stick too, so less plastic builds up on the nozzle.\u003c\/p\u003e\n\u003cp\u003eSizes 0.25, 0.4, 0.6 and 0.8 mm. Nozzle and heatbreak in one factory-assembled part, swapped cold by hand. Skip the 0.25 mm for fibre-filled filament: the fibres are often larger than the hole.\u003c\/p\u003e\n\u003ch3\u003eFits\u003c\/h3\u003e\n\u003cp\u003eEvery Revo coldside. 1.75 mm filament, 300 °C max. Not compatible with V6-style heater blocks. Filaments with very aggressive fillers (Polymaker Fiberon PA-CF and PA-GF and the like) wear even ObXidian over time; for those, look at High Temp Abrasive or DiamondBack.\u003c\/p\u003e\n\u003cp\u003eNeed flow as well? See the \u003ca href=\"\/products\/e3d-revo-high-flow-obxidian-nozzle\"\u003eRevo High Flow ObXidian nozzle\u003c\/a\u003e. E3D part numbers RC-NOZZLE-OBX-0250 to RC-NOZZLE-OBX-0800-AS-SPK.\u003c\/p\u003e","brand":"E3D","offers":[{"title":"0.25 mm","offer_id":55033809240391,"sku":"E3D-RC-NOZZLE-OBX-0250-AS-SPK","price":70.95,"currency_code":"EUR","in_stock":true},{"title":"0.4 mm","offer_id":55033809273159,"sku":"E3D-RC-NOZZLE-OBX-0400-AS-SPK","price":70.95,"currency_code":"EUR","in_stock":true},{"title":"0.6 mm","offer_id":55033809305927,"sku":"E3D-RC-NOZZLE-OBX-0600-AS-SPK","price":70.95,"currency_code":"EUR","in_stock":true},{"title":"0.8 mm","offer_id":55033809338695,"sku":"E3D-RC-NOZZLE-OBX-0800-AS-SPK","price":70.95,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0878\/0575\/5719\/files\/e3d-revo-obxidian-nozzle-abrasion-resistant-025-to-08-mm-9737533.png?v=1789516642"},{"product_id":"e3d-revo-high-flow-obxidian-nozzle","title":"E3D Revo High Flow ObXidian Nozzle — 0.4 to 1.4 mm","description":"\u003cp\u003eObXidian's wear resistance and E3DLC non-stick coating combined with the Revo high-flow core: abrasive filament, printed fast. Same form factor as every other Revo nozzle, so nothing on the toolhead changes. Screw it in cold, by hand.\u003c\/p\u003e\n\u003cp\u003eSizes 0.4, 0.6, 0.8, 1.0, 1.2 and 1.4 mm. For everyday PLA and PETG the plain \u003ca href=\"\/products\/e3d-revo-high-flow-nozzle-brass\"\u003eHigh Flow brass nozzle\u003c\/a\u003e is the cheaper choice; this one is for carbon and glass fibre.\u003c\/p\u003e\n\u003ch3\u003eFits\u003c\/h3\u003e\n\u003cp\u003eEvery Revo coldside. 1.75 mm filament, 300 °C max, 24 V; a 60 W HeaterCore gets the most out of it. Not compatible with V6-style heater blocks. Filaments with very aggressive fillers still wear it over time.\u003c\/p\u003e\n\u003cp\u003eYou may need to re-set your Z offset after a swap. E3D part numbers RC-NOZZLE-HF-OBX-0400 to RC-NOZZLE-HF-OBX-1400-AS-SPK.\u003c\/p\u003e","brand":"E3D","offers":[{"title":"0.4 mm","offer_id":55033816285511,"sku":"E3D-RC-NOZZLE-HF-OBX-0400-AS-SPK","price":75.95,"currency_code":"EUR","in_stock":true},{"title":"0.6 mm","offer_id":55033816318279,"sku":"E3D-RC-NOZZLE-HF-OBX-0600-AS-SPK","price":75.95,"currency_code":"EUR","in_stock":true},{"title":"0.8 mm","offer_id":55033816351047,"sku":"E3D-RC-NOZZLE-HF-OBX-0800-AS-SPK","price":75.95,"currency_code":"EUR","in_stock":true},{"title":"1.0 mm","offer_id":55033816383815,"sku":"E3D-RC-NOZZLE-HF-OBX-1000-AS-SPK","price":75.95,"currency_code":"EUR","in_stock":true},{"title":"1.2 mm","offer_id":55033816416583,"sku":"E3D-RC-NOZZLE-HF-OBX-1200-AS-SPK","price":75.95,"currency_code":"EUR","in_stock":true},{"title":"1.4 mm","offer_id":55033816449351,"sku":"E3D-RC-NOZZLE-HF-OBX-1400-AS-SPK","price":75.95,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0878\/0575\/5719\/files\/e3d-revo-high-flow-obxidian-nozzle-04-to-14-mm-7777609.png?v=1789516640"},{"product_id":"e3d-revo-hta-nozzle","title":"E3D Revo HTA Nozzle — High Temp \u0026 Abrasion-Resistant, 0.25 to 0.8 mm","description":"\u003cp\u003eThe Revo nozzle for the filaments that beat everything else: high temperature and abrasion-resistant in one. A hardened steel tip on a copper carrier and spreader, coated in chromium nitride — so it takes the heat, shrugs off fibre fill, resists corrosion and doesn't let plastic stick.\u003c\/p\u003e\n\u003cp\u003eRated to 500 °C. That is the nozzle's limit, not your setup's: on a 40 W or 60 W HeaterCore you are capped at 300 °C, and you need a Revo High Temperature hotside to go beyond it. Worth knowing before you buy for PEEK or PEI.\u003c\/p\u003e\n\u003ch3\u003eFits\u003c\/h3\u003e\n\u003cp\u003eEvery Revo coldside. 1.75 mm filament. Nozzle and heatbreak are one factory-assembled part, so no hot-tightening and no leaks — swap it cold, by hand. Not compatible with V6-style heater blocks, and expect to re-check your Z offset after a swap.\u003c\/p\u003e\n\u003ch3\u003eHTA or ObXidian?\u003c\/h3\u003e\n\u003cp\u003eSimilar hardness, different reason to buy. \u003ca href=\"\/products\/e3d-revo-obxidian-nozzle\"\u003eObXidian\u003c\/a\u003e stops at 300 °C and costs less; HTA is what you want when the material is both abrasive \u003cem\u003eand\u003c\/em\u003e hot. For the hardest option of all, see the \u003ca href=\"\/products\/e3d-revo-obxidian-500-nozzle\"\u003eObXiDian 500\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003eHTA nozzles are grey with the size engraved. Very aggressive fillers (Polymaker's Fiberon PA-CF and PA-GF and the like) will wear even these over time. Skip 0.25 mm for anything fibre-filled. E3D part numbers RC-NOZZLE-HTA-AS-0250 to -0800-SPK.\u003c\/p\u003e","brand":"E3D","offers":[{"title":"0.25 mm","offer_id":55037179887943,"sku":"E3D-RC-NOZZLE-HTA-AS-0250-SPK","price":77.95,"currency_code":"EUR","in_stock":true},{"title":"0.4 mm","offer_id":55037179920711,"sku":"E3D-RC-NOZZLE-HTA-AS-0400-SPK","price":77.95,"currency_code":"EUR","in_stock":true},{"title":"0.6 mm","offer_id":55037179953479,"sku":"E3D-RC-NOZZLE-HTA-AS-0600-SPK","price":77.95,"currency_code":"EUR","in_stock":true},{"title":"0.8 mm","offer_id":55037179986247,"sku":"E3D-RC-NOZZLE-HTA-AS-0800-SPK","price":77.95,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0878\/0575\/5719\/files\/e3d-revo-hta-nozzle-high-temp-abrasion-resistant-025-to-08-mm-4774715.png?v=1789516634"},{"product_id":"e3d-revo-obxidian-500-nozzle","title":"E3D Revo ObXiDian 500 Nozzle — 0.4 to 0.8 mm","description":"\u003cp\u003eE3D's hardest Revo nozzle. ObXiDian 500 is at least five times more wear-resistant than standard ObXidian, and where ObXidian stops at 300 °C this one is rated to 500. Most abrasive filament — carbon fibre, glass fibre, even the UV-reactive glow-in-the-dark stuff that quietly destroys nozzles — simply won't wear it.\u003c\/p\u003e\n\u003cp\u003eThe coating has a low surface energy, so plastic doesn't build up on the tip: easier to clean between prints, and fewer crashes and cosmetic defects from a blob that grew where it shouldn't. Thermal performance is good enough that interlayer adhesion improves too.\u003c\/p\u003e\n\u003ch3\u003eFits\u003c\/h3\u003e\n\u003cp\u003eEvery Revo coldside. 1.75 mm filament. Nozzle and heatbreak in one factory-assembled part — no hot-tightening, no leaks, swapped cold by hand. Not compatible with V6-style heater blocks. Your printer's own maximum still applies: 500 °C is the nozzle's ceiling, not your hotside's.\u003c\/p\u003e\n\u003ch3\u003eObXiDian 500 or ObXidian?\u003c\/h3\u003e\n\u003cp\u003eIf you print abrasives now and then, \u003ca href=\"\/products\/e3d-revo-obxidian-nozzle\"\u003eObXidian\u003c\/a\u003e is plenty and costs less. If that is what your machine runs on, the 500 pays for itself in nozzles you don't replace. Need flow as well? See the \u003ca href=\"\/products\/e3d-revo-high-flow-obxidian-500-nozzle\"\u003eHigh Flow ObXiDian 500\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003eSkip 0.4 mm for heavily filled filament — the fibres are often close to the hole size. E3D part numbers RC-NOZZLE-OBD-AS-0400 to -0800-SPK.\u003c\/p\u003e","brand":"E3D","offers":[{"title":"0.4 mm","offer_id":55037180215623,"sku":"E3D-RC-NOZZLE-OBD-AS-0400-SPK","price":79.95,"currency_code":"EUR","in_stock":true},{"title":"0.6 mm","offer_id":55037180248391,"sku":"E3D-RC-NOZZLE-OBD-AS-0600-SPK","price":79.95,"currency_code":"EUR","in_stock":true},{"title":"0.8 mm","offer_id":55037180281159,"sku":"E3D-RC-NOZZLE-OBD-AS-0800-SPK","price":79.95,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0878\/0575\/5719\/files\/e3d-revo-obxidian-500-nozzle-04-to-08-mm-4387452.png?v=1789516636"},{"product_id":"e3d-revo-high-flow-obxidian-500-nozzle","title":"E3D Revo High Flow ObXiDian 500 Nozzle — 0.4 to 0.8 mm","description":"\u003cp\u003eBoth at once: E3D's hardest nozzle coating and their high-flow geometry. ObXiDian 500 is at least five times more wear-resistant than standard ObXidian and rated to 500 °C, and the four-channel internal insert pushes heat into the filament far better than a plain bore — so you can run abrasive material fast instead of choosing one or the other.\u003c\/p\u003e\n\u003cp\u003eSame form factor as every other Revo nozzle, so nothing on your toolhead changes. The low-surface-energy coating keeps plastic off the tip: less cleaning between prints, fewer crashes.\u003c\/p\u003e\n\u003ch3\u003eFits\u003c\/h3\u003e\n\u003cp\u003eEvery Revo coldside. 1.75 mm filament. Nozzle and heatbreak in one factory-assembled part, swapped cold by hand — no hot-tightening, no leaks. Not compatible with V6-style heater blocks. The 500 °C rating is the nozzle's; your hotside sets the real ceiling.\u003c\/p\u003e\n\u003ch3\u003eWhich one do you need?\u003c\/h3\u003e\n\u003cp\u003eFlow but not the extreme hardness: \u003ca href=\"\/products\/e3d-revo-high-flow-obxidian-nozzle\"\u003eHigh Flow ObXidian\u003c\/a\u003e, cheaper and good to 300 °C. Hardness but no need for speed: \u003ca href=\"\/products\/e3d-revo-obxidian-500-nozzle\"\u003eObXiDian 500\u003c\/a\u003e. Hot and abrasive rather than fast: \u003ca href=\"\/products\/e3d-revo-hta-nozzle\"\u003eHTA\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003eSkip 0.4 mm for heavily filled filament — the fibres are often close to the hole size. E3D part numbers RC-NOZZLE-HF-OBD-AS-0400 to -0800-SPK.\u003c\/p\u003e","brand":"E3D","offers":[{"title":"0.4 mm","offer_id":55037180641607,"sku":"E3D-RC-NOZZLE-HF-OBD-AS-0400-SPK","price":93.95,"currency_code":"EUR","in_stock":true},{"title":"0.6 mm","offer_id":55037180674375,"sku":"E3D-RC-NOZZLE-HF-OBD-AS-0600-SPK","price":93.95,"currency_code":"EUR","in_stock":true},{"title":"0.8 mm","offer_id":55037180707143,"sku":"E3D-RC-NOZZLE-HF-OBD-AS-0800-SPK","price":93.95,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0878\/0575\/5719\/files\/e3d-revo-high-flow-obxidian-500-nozzle-04-to-08-mm-6042143.png?v=1789516642"},{"product_id":"e3d-revo-high-flow-hta-nozzle","title":"E3D Revo High Flow HTA Nozzle — 0.4 to 1.4 mm","description":"\u003cp\u003eHigh temperature, high flow and abrasion-resistant in one nozzle. Hardened steel tip on a copper carrier and spreader, chromium-nitride coated for wear resistance and non-stick, with E3D's high-flow internal geometry on top — so hot abrasive filament goes through faster instead of slower.\u003c\/p\u003e\n\u003cp\u003eThe flow geometry unlocks 0.4, 0.6 and 0.8 mm at higher rates and adds 1.0, 1.2 and 1.4 mm, which is where this range gets interesting: big nozzles in a material that would normally chew through them.\u003c\/p\u003e\n\u003ch3\u003eFits\u003c\/h3\u003e\n\u003cp\u003eEvery Revo coldside, and the form factor is identical to a standard Revo nozzle so your mount and fan duct stay as they are. 1.75 mm filament. Nozzle and heatbreak in one factory-assembled part, swapped cold by hand. Not compatible with V6-style heater blocks, and re-check your Z offset after a swap.\u003c\/p\u003e\n\u003ch3\u003eAbout that 500 °C\u003c\/h3\u003e\n\u003cp\u003eIt is the nozzle's rating. On a 40 W or 60 W HeaterCore you are capped at 300 °C — to actually print that hot you need a Revo High Temperature hotside.\u003c\/p\u003e\n\u003ch3\u003eWhich one?\u003c\/h3\u003e\n\u003cp\u003eNo need for the big sizes or the heat: \u003ca href=\"\/products\/e3d-revo-hta-nozzle\"\u003eHTA\u003c\/a\u003e, cheaper. Abrasive but not hot: \u003ca href=\"\/products\/e3d-revo-high-flow-obxidian-nozzle\"\u003eHigh Flow ObXidian\u003c\/a\u003e. Hardest of all: \u003ca href=\"\/products\/e3d-revo-high-flow-obxidian-500-nozzle\"\u003eHigh Flow ObXiDian 500\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003eGrey, with the size engraved. Skip 0.4 mm for heavily filled filament. E3D part numbers RC-NOZZLE-HF-HTA-0400 to -1400-AS-SPK.\u003c\/p\u003e","brand":"E3D","offers":[{"title":"0.4 mm","offer_id":55037181591879,"sku":"E3D-RC-NOZZLE-HF-HTA-0400-AS-SPK","price":82.95,"currency_code":"EUR","in_stock":true},{"title":"0.6 mm","offer_id":55037181624647,"sku":"E3D-RC-NOZZLE-HF-HTA-0600-AS-SPK","price":82.95,"currency_code":"EUR","in_stock":true},{"title":"0.8 mm","offer_id":55037181657415,"sku":"E3D-RC-NOZZLE-HF-HTA-0800-AS-SPK","price":82.95,"currency_code":"EUR","in_stock":true},{"title":"1.0 mm","offer_id":55037181690183,"sku":"E3D-RC-NOZZLE-HF-HTA-1000-AS-SPK","price":82.95,"currency_code":"EUR","in_stock":true},{"title":"1.2 mm","offer_id":55037181722951,"sku":"E3D-RC-NOZZLE-HF-HTA-1200-AS-SPK","price":82.95,"currency_code":"EUR","in_stock":true},{"title":"1.4 mm","offer_id":55037181755719,"sku":"E3D-RC-NOZZLE-HF-HTA-1400-AS-SPK","price":82.95,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0878\/0575\/5719\/files\/e3d-revo-high-flow-hta-nozzle-04-to-14-mm-5060761.png?v=1789516643"},{"product_id":"e3d-revo-high-temperature-nozzle","title":"E3D Revo High Temperature Nozzle — Copper, 0.4 to 0.8 mm","description":"\u003cp\u003eA copper Revo nozzle with a copper spreader for the best possible heat transfer, finished in chromium nitride for corrosion resistance and a non-stick surface. Rated to 500 °C — this is the nozzle for engineering polymers like PEEK and PEI, where the temperature is the problem rather than the filler.\u003c\/p\u003e\n\u003cp\u003eCopper moves heat better than brass or steel, which is what lets it hold temperature at the tip when you are running near the top of the range.\u003c\/p\u003e\n\u003ch3\u003eRead this before you buy\u003c\/h3\u003e\n\u003cp\u003eThe 500 °C is the nozzle's rating, not your printer's. On a 40 W or 60 W HeaterCore you are limited to 300 °C, and you need a Revo High Temperature hotside to go higher. If you are buying this for PEEK, budget for the hotside too.\u003c\/p\u003e\n\u003ch3\u003eFits\u003c\/h3\u003e\n\u003cp\u003eEvery Revo coldside. 1.75 mm filament. Nozzle and heatbreak in one factory-assembled part — no hot-tightening, no leaks, swapped cold by hand. Not compatible with V6-style heater blocks.\u003c\/p\u003e\n\u003ch3\u003ePrinting abrasives too?\u003c\/h3\u003e\n\u003cp\u003eThen this is the wrong one — bare copper wears fast on filled filament. Take the \u003ca href=\"\/products\/e3d-revo-hta-nozzle\"\u003eHTA\u003c\/a\u003e, which is the same temperature rating with a hardened steel tip.\u003c\/p\u003e\n\u003cp\u003eGrey, with the size engraved. E3D part numbers RC-NOZZLE-HT-AS-0400 to -0800-SPK.\u003c\/p\u003e","brand":"E3D","offers":[{"title":"0.4 mm","offer_id":55037182083399,"sku":"E3D-RC-NOZZLE-HT-AS-0400-SPK","price":56.95,"currency_code":"EUR","in_stock":true},{"title":"0.6 mm","offer_id":55037182116167,"sku":"E3D-RC-NOZZLE-HT-AS-0600-SPK","price":56.95,"currency_code":"EUR","in_stock":true},{"title":"0.8 mm","offer_id":55037182148935,"sku":"E3D-RC-NOZZLE-HT-AS-0800-SPK","price":56.95,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0878\/0575\/5719\/files\/e3d-revo-high-temperature-nozzle-copper-04-to-08-mm-1179882.png?v=1789516633"}],"url":"https:\/\/pjotr3dshop.com\/collections\/e3d-revo-nozzles.oembed","provider":"Pjotr3DShop","version":"1.0","type":"link"}