{"title":"Hardware","description":"\u003cp\u003eHardware to go with the printed parts, for Voron builds and sim rigs: fasteners, motion parts, frames and the odd bracket I got tired of waiting for myself. The MISUMI frame kits are the one exception: those are ordered per build, and the lead time is on their product page.\u003c\/p\u003e","products":[{"product_id":"doomcube-corner-extrusion-kit-misumi-4040-black-voron-2-4","title":"DoomCube Corner Extrusion Kit — MISUMI 4040, Black, Voron 2.4","description":"\u003cp\u003eThe four 4040 verticals that turn a Voron 2.4 frame into a DoomCube, ordered from MISUMI to the part numbers in the DoomCube-2 BOM. Pick your size and your corner style and I order the set for you.\u003c\/p\u003e\n\u003cp\u003eDoomCube swaps the 2020 verticals for 4040 so the panels sit off the frame with an air gap for insulation, moves the Z drives to the top and puts the mains electronics at the bottom. This kit is the extrusion part of that: the rest of your 2.4 frame stays as it is.\u003c\/p\u003e\n\u003ch3\u003eThree corner styles, straight from the BOM\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSquare, pre-drilled:\u003c\/strong\u003e MISUMI HFSB5-4040 with the LCP-RCP blind-joint counterbores machined by MISUMI. They replace your four 2020 verticals; no drilling at your bench.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSquare, DIY:\u003c\/strong\u003e the same HFSB5-4040 without machining, the BOM's DIY option. You drill the blind-joint holes yourself and save a fair bit.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRounded:\u003c\/strong\u003e MISUMI HFSR5-404020, the rounded-corner profile your existing 2020 verticals nest into. The 4040s need no machining; the 2020 verticals that nest into them need holes drilled, which you do yourself.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's in the box\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSize\u003c\/th\u003e\n\u003cth\u003eSquare, pre-drilled\u003c\/th\u003e\n\u003cth\u003eSquare, DIY\u003c\/th\u003e\n\u003cth\u003eRounded\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e250\u003c\/td\u003e\n\u003ctd\u003e4× HFSB5-4040-430-LCP-RCP\u003c\/td\u003e\n\u003ctd\u003e4× HFSB5-4040-430\u003c\/td\u003e\n\u003ctd\u003e4× HFSR5-404020-430\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e300\u003c\/td\u003e\n\u003ctd\u003e4× HFSB5-4040-480-LCP-RCP\u003c\/td\u003e\n\u003ctd\u003e4× HFSB5-4040-480\u003c\/td\u003e\n\u003ctd\u003e4× HFSR5-404020-480\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e350\u003c\/td\u003e\n\u003ctd\u003e4× HFSB5-4040-530-LCP-RCP\u003c\/td\u003e\n\u003ctd\u003e4× HFSB5-4040-530\u003c\/td\u003e\n\u003ctd\u003e4× HFSR5-404020-530\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003eBlack anodised. Blind-joint screws are not included. The new Z idlers and relocated endstop mounts DoomCube needs are printed parts from the DoomCube-2 repository.\u003c\/p\u003e\n\u003ch3\u003eLead time and shipping\u003c\/h3\u003e\n\u003cp\u003eMISUMI cuts and machines 4040 to order and quotes about two weeks for it, so count on two to three weeks before your set ships from Zutphen. Slower than my printed parts, but it is the real part with the real machining. I'll mail you when it is on its way.\u003c\/p\u003e\n\u003cp\u003eFour 4040 bars weigh about 3 kg, so this kit ships as a PostNL parcel charged by weight at checkout; the free-shipping rule for my printed parts does not cover it.\u003c\/p\u003e\n\u003cp\u003eBuilding the doors too? The \u003ca href=\"\/products\/doomcube-door-extrusions-hinges-misumi-hfsb5-2020-black\"\u003eDoomCube Door Extrusions + Hinges kit\u003c\/a\u003e is cut from the same BOM. Need other MISUMI lengths, profiles or parts for your build? Mail me at \u003ca href=\"mailto:pjotr3dshop@gmail.com\"\u003epjotr3dshop@gmail.com\u003c\/a\u003e with the part numbers and I'll quote your order.\u003c\/p\u003e\n\u003chr\u003e\n\u003cp\u003eDesign: DoomCube-2 by FrankenVoron and the Voron community, published under GPLv3 at github.com\/FrankenVoron\/DoomCube-2. Extrusion by MISUMI. I source, check and pack the set; the design is theirs.\u003c\/p\u003e","brand":"MISUMI","offers":[{"title":"250 \/ Square, pre-drilled","offer_id":55004941025607,"sku":"VRN-DC-COR-250-SQ","price":169.95,"currency_code":"EUR","in_stock":true},{"title":"250 \/ Rounded","offer_id":55004941058375,"sku":"VRN-DC-COR-250-RD","price":79.95,"currency_code":"EUR","in_stock":true},{"title":"300 \/ Square, pre-drilled","offer_id":55004941091143,"sku":"VRN-DC-COR-300-SQ","price":179.95,"currency_code":"EUR","in_stock":true},{"title":"300 \/ Rounded","offer_id":55004941123911,"sku":"VRN-DC-COR-300-RD","price":84.95,"currency_code":"EUR","in_stock":true},{"title":"350 \/ Square, pre-drilled","offer_id":55004941156679,"sku":"VRN-DC-COR-350-SQ","price":189.95,"currency_code":"EUR","in_stock":true},{"title":"350 \/ Rounded","offer_id":55004941189447,"sku":"VRN-DC-COR-350-RD","price":89.95,"currency_code":"EUR","in_stock":true},{"title":"250 \/ Square, DIY","offer_id":55014278922567,"sku":"VRN-DC-COR-250-SQP","price":124.95,"currency_code":"EUR","in_stock":true},{"title":"300 \/ Square, DIY","offer_id":55014278955335,"sku":"VRN-DC-COR-300-SQP","price":129.95,"currency_code":"EUR","in_stock":true},{"title":"350 \/ Square, DIY","offer_id":55014278988103,"sku":"VRN-DC-COR-350-SQP","price":134.95,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0878\/0575\/5719\/files\/doomcube-corner-extrusion-kit-misumi-4040-black-voron-24-1952675.png?v=1789351453"},{"product_id":"doomcube-door-extrusions-hinges-misumi-hfsb5-2020-black","title":"DoomCube Door Extrusions + Hinges — MISUMI HFSB5-2020, Black","description":"\u003cp\u003eThe extrusions and hinges for DoomCube's framed front doors, in the BOM's pre-drilled version: two uprights with the blind-joint access holes machined by MISUMI, two rails tapped M5 both ends, plus two MISUMI HHPBSN5 black hinge sets. The frame goes together with four screws and no drilling. Pick your size and I order the set for you.\u003c\/p\u003e\n\u003ch3\u003eWhat's in the box\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSize\u003c\/th\u003e\n\u003cth\u003eUprights, access holes\u003c\/th\u003e\n\u003cth\u003eRails, tapped both ends\u003c\/th\u003e\n\u003cth\u003eHinges\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e250\u003c\/td\u003e\n\u003ctd\u003e2× HFSB5-2020-430-AH10-BH420\u003c\/td\u003e\n\u003ctd\u003e2× HFSB5-2020-328-TPW\u003c\/td\u003e\n\u003ctd\u003e2× HHPBSN5-SET\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e300\u003c\/td\u003e\n\u003ctd\u003e2× HFSB5-2020-480-AH10-BH470\u003c\/td\u003e\n\u003ctd\u003e2× HFSB5-2020-378-TPW\u003c\/td\u003e\n\u003ctd\u003e2× HHPBSN5-SET\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e350\u003c\/td\u003e\n\u003ctd\u003e2× HFSB5-2020-530-AH10-BH520\u003c\/td\u003e\n\u003ctd\u003e2× HFSB5-2020-428-TPW\u003c\/td\u003e\n\u003ctd\u003e2× HHPBSN5-SET\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003eBlack anodised extrusion. Door panels, corner brackets and the four blind-joint screws are not included; the panel DXFs are in the DoomCube-2 repository. Only need hinges? They are sold on their own as the \u003ca href=\"\/products\/misumi-hhpbsn5-door-hinge-set-for-2020-extrusion-doors\"\u003eMISUMI HHPBSN5 Door Hinge Set\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch3\u003eLead time and shipping\u003c\/h3\u003e\n\u003cp\u003eMISUMI cuts and machines each set to order, so count on about two weeks before it ships from Zutphen, longer than my printed parts. I'll mail you when it is on its way.\u003c\/p\u003e\n\u003cp\u003eThe set weighs a little over a kilo and ships as a PostNL parcel charged by weight at checkout; the free-shipping rule for my printed parts does not cover extrusion.\u003c\/p\u003e\n\u003cp\u003eNeed other MISUMI lengths, profiles or parts for your build? Mail me at \u003ca href=\"mailto:pjotr3dshop@gmail.com\"\u003epjotr3dshop@gmail.com\u003c\/a\u003e with the part numbers and I'll quote your order.\u003c\/p\u003e\n\u003chr\u003e\n\u003cp\u003eDesign: DoomCube-2 by FrankenVoron and the Voron community, published under GPLv3 at github.com\/FrankenVoron\/DoomCube-2. Extrusion and hinges by MISUMI. I source, check and pack the set; the design is theirs.\u003c\/p\u003e","brand":"MISUMI","offers":[{"title":"250","offer_id":55004941451591,"sku":"VRN-DC-DOOR-250","price":74.95,"currency_code":"EUR","in_stock":true},{"title":"300","offer_id":55004941484359,"sku":"VRN-DC-DOOR-300","price":79.95,"currency_code":"EUR","in_stock":true},{"title":"350","offer_id":55004941517127,"sku":"VRN-DC-DOOR-350","price":84.95,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0878\/0575\/5719\/files\/doomcube-door-extrusions-hinges-misumi-hfsb5-2020-black-1325609.png?v=1789351451"},{"product_id":"misumi-hhpbsn5-door-hinge-set-for-2020-extrusion-doors","title":"MISUMI HHPBSN5 Door Hinge Set — for 2020 Extrusion Doors","description":"\u003cp\u003eThe MISUMI hinge the DoomCube-2 BOM specifies for its framed doors: one HHPBSN5-SET in black, or HHPSN5-SET in silver. A set is one flat hinge with conical countersinks, demountable, with a POM bush, for 20 mm T-slot extrusion. A DoomCube door takes two sets; order the quantity you need.\u003c\/p\u003e\n\u003cp\u003eIt fits any 2020 extrusion door, not just DoomCube: a Voron 2.4 or Trident with a framed front door, an enclosure you built yourself. Same part, straight from MISUMI, no substitutes.\u003c\/p\u003e\n\u003ch3\u003eLead time and shipping\u003c\/h3\u003e\n\u003cp\u003eOrdered from MISUMI per sale, so count on about two weeks before it ships from Zutphen. I'll mail you when it is on its way. Shipping is charged at checkout; add the hinges to a kit order and they travel in the same parcel.\u003c\/p\u003e\n\u003cp\u003eNeed the door extrusions too? The \u003ca href=\"\/products\/doomcube-door-extrusions-hinges-misumi-hfsb5-2020-black\"\u003eDoomCube Door Extrusions + Hinges kit\u003c\/a\u003e has both. Need other MISUMI parts, lengths or profiles? Mail me at \u003ca href=\"mailto:pjotr3dshop@gmail.com\"\u003epjotr3dshop@gmail.com\u003c\/a\u003e with the part numbers and I'll quote your order.\u003c\/p\u003e","brand":"MISUMI","offers":[{"title":"Black","offer_id":55004969271623,"sku":"MIS-HHPBSN5","price":14.95,"currency_code":"EUR","in_stock":true},{"title":"Silver","offer_id":55004969304391,"sku":"MIS-HHPSN5","price":14.95,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0878\/0575\/5719\/files\/misumi-hhpbsn5-door-hinge-set-for-2020-extrusion-doors-9561284.png?v=1789351453"},{"product_id":"e3d-revo-voron-coldside","title":"E3D Revo Voron Coldside — Revo Heatsink for Stealthburner","description":"\u003cp\u003eThe Revo heatsink E3D developed with the Voron Design team for the Stealthburner: a red anodised sink that bolts rigidly to the toolhead with four M3 bolts and takes any Revo nozzle. Nozzle changes are done cold, by hand, in under a minute, with no tools and no hot tightening.\u003c\/p\u003e\n\u003cp\u003eThis is the coldside only. Pair it with a \u003ca href=\"\/products\/e3d-revo-hotside-kit-24v\"\u003eRevo Hotside Kit\u003c\/a\u003e for the HeaterCore and nozzles and you have a complete hotend: Starter for PLA, PETG and ASA at normal speeds, High Flow if you want to print fast, High Flow X if you also print carbon- or glass-filled filament.\u003c\/p\u003e\n\u003ch3\u003eFits\u003c\/h3\u003e\n\u003cp\u003eVoron 2.4, Trident, Switchwire, V1, V0.1 and Legacy, on the Stealthburner and other Revo-compatible toolheads. About 25 g of sink, 1.75 mm filament, 300 °C max with a standard HeaterCore.\u003c\/p\u003e\n\u003ch3\u003eWhat's in the box\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e1 × Revo Voron heatsink\u003c\/li\u003e\n\u003cli\u003e1 × heater extension cable\u003c\/li\u003e\n\u003cli\u003e1 × thermistor extension cable\u003c\/li\u003e\n\u003cli\u003e1 × 100 mm PTFE tube\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003ePrinted parts and mounting instructions are on \u003ca href=\"https:\/\/docs.vorondesign.com\/\" rel=\"noopener\"\u003edocs.vorondesign.com\u003c\/a\u003e. You may need to re-set your Z offset after a nozzle change. E3D part number REVO-VORON-COLD.\u003c\/p\u003e","brand":"E3D","offers":[{"title":"Default Title","offer_id":55033780306247,"sku":"E3D-REVO-VORON-COLD","price":43.95,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0878\/0575\/5719\/files\/e3d-revo-voron-coldside-kit-contents.png?v=1789487970"},{"product_id":"e3d-revo-hotside-kit-24v","title":"E3D Revo Hotside Kit, 24V — Starter, High Flow or High Flow X","description":"\u003cp\u003eThe heating half of a Revo hotend: a HeaterCore plus nozzles, matched to how you print. Add it to any Revo coldside (Voron, Six, Prusa, Creality, Hemera XS, Roto) and you're done. All three kits are 24 V.\u003c\/p\u003e\n\u003ch3\u003eWhich one?\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eStarter\u003c\/strong\u003e: 40 W HeaterCore and a 0.6 mm brass nozzle, plus a free 0.4 mm brass nozzle. PLA, PETG and ASA at normal speeds.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHigh Flow\u003c\/strong\u003e: 60 W HeaterCore with 0.4 and 0.6 mm High Flow brass nozzles (roughly 70 % more flow than standard Revo), plus a free 0.4 mm brass nozzle and a Fully Loaded sock pack. For printing fast and big.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHigh Flow X\u003c\/strong\u003e: 60 W HeaterCore with 0.4 and 0.6 mm High Flow ObXidian nozzles (E3DLC-coated, about 55 % more flow), plus the same free brass nozzle and sock pack. For carbon- and glass-filled filament at speed.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eEvery Revo nozzle is a factory-assembled nozzle and heatbreak in one, so there is nothing to hot-tighten. 300 °C max. E3D part numbers REVO-HOT-KIT-24V, REVO-HOT-KIT-HF-24V and REVO-HOT-KIT-HF-X-24V.\u003c\/p\u003e\n\u003cp\u003eNo coldside yet? For a Voron, the \u003ca href=\"\/products\/e3d-revo-voron-coldside\"\u003eRevo Voron Coldside\u003c\/a\u003e is the one.\u003c\/p\u003e","brand":"E3D","offers":[{"title":"Starter (40 W)","offer_id":55033788432711,"sku":"E3D-REVO-HOT-KIT-24V","price":58.95,"currency_code":"EUR","in_stock":true},{"title":"High Flow (60 W)","offer_id":55033788465479,"sku":"E3D-REVO-HOT-KIT-HF-24V","price":129.95,"currency_code":"EUR","in_stock":true},{"title":"High Flow X (60 W, ObXidian)","offer_id":55033788498247,"sku":"E3D-REVO-HOT-KIT-HF-X-24V","price":187.95,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0878\/0575\/5719\/files\/e3d-revo-hotside-kit-starter-24v.png?v=1789487970"},{"product_id":"e3d-revo-nozzle-brass","title":"E3D Revo Nozzle, Brass — 0.15 to 0.8 mm","description":"\u003cp\u003eThe standard Revo nozzle: nozzle and heatbreak in one factory-assembled part, so you screw it into any Revo coldside by hand, cold, and print. No tools, no hot tightening, no leaks from a bad assembly. A swap takes under a minute.\u003c\/p\u003e\n\u003cp\u003eSizes 0.15, 0.25, 0.4, 0.6 and 0.8 mm. Each comes with a colour-coded silicone sock and the size engraved on the nozzle, so you can tell them apart in the drawer.\u003c\/p\u003e\n\u003ch3\u003eFits\u003c\/h3\u003e\n\u003cp\u003eEvery Revo coldside: Revo Voron, Six, Micro, CR, Hemera XS, the Prusa MK3 and Mini editions, Roto. Not compatible with V6-style heater blocks. 1.75 mm filament, 300 °C max, 13 mm diameter, 41 mm long.\u003c\/p\u003e\n\u003cp\u003eYou may need to re-set your Z offset after a swap. The 0.15 mm is a specialist nozzle that clogs more easily; read E3D's filament starter settings before you use it. Want more flow in the same shape? See the \u003ca href=\"\/products\/e3d-revo-high-flow-nozzle-brass\"\u003eRevo High Flow nozzle\u003c\/a\u003e. E3D part numbers RC-NOZZLE-0150 to RC-NOZZLE-0800-AS-SPK.\u003c\/p\u003e","brand":"E3D","offers":[{"title":"0.15 mm","offer_id":55033794691399,"sku":"E3D-RC-NOZZLE-0150-AS-SPK","price":26.95,"currency_code":"EUR","in_stock":true},{"title":"0.25 mm","offer_id":55033794724167,"sku":"E3D-RC-NOZZLE-0250-AS-SPK","price":26.95,"currency_code":"EUR","in_stock":true},{"title":"0.4 mm","offer_id":55033794756935,"sku":"E3D-RC-NOZZLE-0400-AS-SPK","price":26.95,"currency_code":"EUR","in_stock":true},{"title":"0.6 mm","offer_id":55033794789703,"sku":"E3D-RC-NOZZLE-0600-AS-SPK","price":26.95,"currency_code":"EUR","in_stock":true},{"title":"0.8 mm","offer_id":55033794822471,"sku":"E3D-RC-NOZZLE-0800-AS-SPK","price":26.95,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0878\/0575\/5719\/files\/e3d-revo-nozzle-brass-all-sizes.png?v=1789487970"},{"product_id":"e3d-revo-high-flow-nozzle-brass","title":"E3D Revo High Flow Nozzle, Brass — 0.4 to 1.4 mm","description":"\u003cp\u003eSame size and shape as a standard Revo nozzle, so nothing on your toolhead changes, but with E3D's internal high-flow geometry: more surface area, better heat transfer, roughly 70 % more volumetric flow. Screw it in cold, by hand, and print faster or bigger.\u003c\/p\u003e\n\u003cp\u003eSizes 0.4, 0.6, 0.8, 1.0, 1.2 and 1.4 mm. The nozzle is engraved with its size and \"HF\", and the high-flow insert shows as a circle on the tip.\u003c\/p\u003e\n\u003ch3\u003eFits\u003c\/h3\u003e\n\u003cp\u003eRevo Voron, Six, Micro, CR, Hemera XS, Prusa MK3 and Mini editions, Roto, MicroSwiss NG and Biqu H2 V2. 1.75 mm filament, 300 °C max, 24 V. A 40 W HeaterCore works for most materials; for polycarbonate and other hot filaments the 60 W core gets the most out of it. Not compatible with V6-style heater blocks.\u003c\/p\u003e\n\u003cp\u003eYou may need to re-set your Z offset after a swap. E3D's measured flow rates per size and material are in its \u003ca href=\"https:\/\/e3d-online.com\/blogs\/help-centre\/revo-nozzle-maximum-flow-rates\" rel=\"noopener\"\u003eflow rate documentation\u003c\/a\u003e. E3D part numbers RC-NOZZLE-HF-0400 to RC-NOZZLE-HF-1400-AS-SPK.\u003c\/p\u003e","brand":"E3D","offers":[{"title":"0.4 mm","offer_id":55033803440455,"sku":"E3D-RC-NOZZLE-HF-0400-AS-SPK","price":47.95,"currency_code":"EUR","in_stock":true},{"title":"0.6 mm","offer_id":55033803473223,"sku":"E3D-RC-NOZZLE-HF-0600-AS-SPK","price":47.95,"currency_code":"EUR","in_stock":true},{"title":"0.8 mm","offer_id":55033803505991,"sku":"E3D-RC-NOZZLE-HF-0800-AS-SPK","price":47.95,"currency_code":"EUR","in_stock":true},{"title":"1.0 mm","offer_id":55033803538759,"sku":"E3D-RC-NOZZLE-HF-1000-AS-SPK","price":47.95,"currency_code":"EUR","in_stock":true},{"title":"1.2 mm","offer_id":55033803571527,"sku":"E3D-RC-NOZZLE-HF-1200-AS-SPK","price":47.95,"currency_code":"EUR","in_stock":true},{"title":"1.4 mm","offer_id":55033803604295,"sku":"E3D-RC-NOZZLE-HF-1400-AS-SPK","price":47.95,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0878\/0575\/5719\/files\/e3d-revo-high-flow-nozzle-brass-0400.jpg?v=1789487982"},{"product_id":"e3d-revo-obxidian-nozzle","title":"E3D Revo ObXidian Nozzle — Abrasion-Resistant, 0.25 to 0.8 mm","description":"\u003cp\u003eE3D's hardest Revo nozzle: a tool-steel tip with the E3DLC coating on a copper-alloy body. It shrugs off the carbon- and glass-filled filament that eats brass, and because the body conducts heat like brass you keep your existing slicer profiles. The coating is non-stick too, so less plastic builds up on the nozzle.\u003c\/p\u003e\n\u003cp\u003eSizes 0.25, 0.4, 0.6 and 0.8 mm. Nozzle and heatbreak in one factory-assembled part, swapped cold by hand. Skip the 0.25 mm for fibre-filled filament: the fibres are often larger than the hole.\u003c\/p\u003e\n\u003ch3\u003eFits\u003c\/h3\u003e\n\u003cp\u003eEvery Revo coldside. 1.75 mm filament, 300 °C max. Not compatible with V6-style heater blocks. Filaments with very aggressive fillers (Polymaker Fiberon PA-CF and PA-GF and the like) wear even ObXidian over time; for those, look at High Temp Abrasive or DiamondBack.\u003c\/p\u003e\n\u003cp\u003eNeed flow as well? See the \u003ca href=\"\/products\/e3d-revo-high-flow-obxidian-nozzle\"\u003eRevo High Flow ObXidian nozzle\u003c\/a\u003e. E3D part numbers RC-NOZZLE-OBX-0250 to RC-NOZZLE-OBX-0800-AS-SPK.\u003c\/p\u003e","brand":"E3D","offers":[{"title":"0.25 mm","offer_id":55033809240391,"sku":"E3D-RC-NOZZLE-OBX-0250-AS-SPK","price":70.95,"currency_code":"EUR","in_stock":true},{"title":"0.4 mm","offer_id":55033809273159,"sku":"E3D-RC-NOZZLE-OBX-0400-AS-SPK","price":70.95,"currency_code":"EUR","in_stock":true},{"title":"0.6 mm","offer_id":55033809305927,"sku":"E3D-RC-NOZZLE-OBX-0600-AS-SPK","price":70.95,"currency_code":"EUR","in_stock":true},{"title":"0.8 mm","offer_id":55033809338695,"sku":"E3D-RC-NOZZLE-OBX-0800-AS-SPK","price":70.95,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0878\/0575\/5719\/files\/e3d-revo-obxidian-nozzle-0400.png?v=1789487970"},{"product_id":"e3d-revo-high-flow-obxidian-nozzle","title":"E3D Revo High Flow ObXidian Nozzle — 0.4 to 1.4 mm","description":"\u003cp\u003eObXidian's wear resistance and E3DLC non-stick coating combined with the Revo high-flow core: abrasive filament, printed fast. Same form factor as every other Revo nozzle, so nothing on the toolhead changes. Screw it in cold, by hand.\u003c\/p\u003e\n\u003cp\u003eSizes 0.4, 0.6, 0.8, 1.0, 1.2 and 1.4 mm. For everyday PLA and PETG the plain \u003ca href=\"\/products\/e3d-revo-high-flow-nozzle-brass\"\u003eHigh Flow brass nozzle\u003c\/a\u003e is the cheaper choice; this one is for carbon and glass fibre.\u003c\/p\u003e\n\u003ch3\u003eFits\u003c\/h3\u003e\n\u003cp\u003eEvery Revo coldside. 1.75 mm filament, 300 °C max, 24 V; a 60 W HeaterCore gets the most out of it. Not compatible with V6-style heater blocks. Filaments with very aggressive fillers still wear it over time.\u003c\/p\u003e\n\u003cp\u003eYou may need to re-set your Z offset after a swap. E3D part numbers RC-NOZZLE-HF-OBX-0400 to RC-NOZZLE-HF-OBX-1400-AS-SPK.\u003c\/p\u003e","brand":"E3D","offers":[{"title":"0.4 mm","offer_id":55033816285511,"sku":"E3D-RC-NOZZLE-HF-OBX-0400-AS-SPK","price":75.95,"currency_code":"EUR","in_stock":true},{"title":"0.6 mm","offer_id":55033816318279,"sku":"E3D-RC-NOZZLE-HF-OBX-0600-AS-SPK","price":75.95,"currency_code":"EUR","in_stock":true},{"title":"0.8 mm","offer_id":55033816351047,"sku":"E3D-RC-NOZZLE-HF-OBX-0800-AS-SPK","price":75.95,"currency_code":"EUR","in_stock":true},{"title":"1.0 mm","offer_id":55033816383815,"sku":"E3D-RC-NOZZLE-HF-OBX-1000-AS-SPK","price":75.95,"currency_code":"EUR","in_stock":true},{"title":"1.2 mm","offer_id":55033816416583,"sku":"E3D-RC-NOZZLE-HF-OBX-1200-AS-SPK","price":75.95,"currency_code":"EUR","in_stock":true},{"title":"1.4 mm","offer_id":55033816449351,"sku":"E3D-RC-NOZZLE-HF-OBX-1400-AS-SPK","price":75.95,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0878\/0575\/5719\/files\/e3d-revo-high-flow-obxidian-nozzle-0400.png?v=1789487983"}],"url":"https:\/\/pjotr3dshop.com\/collections\/hardware.oembed","provider":"Pjotr3DShop","version":"1.0","type":"link"}