{"title":"Hotends \u0026 Extruders","description":"\u003cp\u003eHotends, nozzles and extruders for Voron and Klipper printers. E3D Revo coldsides, hotside kits, brass and ObXidian nozzles, and extruder parts kits — shipped from the Netherlands.\u003c\/p\u003e","products":[{"product_id":"galileo-2-extruder-printed-parts-kit-abs-two-colours","title":"Galileo 2 Extruder Printed Parts Kit — ABS, Two Colours","description":"\u003cp\u003eThe printed parts for a Galileo 2 extruder, in ABS, in your two colours. Pick the version above: G2E to replace Clockwork 2 on a Stealthburner, or G2SA standalone in its Sherpa Mini, Orbiter 2 or bowden forms. The Trident Z drive (G2Z) is a separate kit.\u003c\/p\u003e\n\u003cp\u003eWhat's in the bag: front and rear bodies, bearing holder, tensioner arm, knob, cable cover and the chain link you chose; for the G2SA the plates and main body for your mount.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMaterial: Bambu ABS, colours picked above\u003c\/li\u003e\n\u003cli\u003eFits: Stealthburner (G2E), standalone mounts and bowden (G2SA)\u003c\/li\u003e\n\u003cli\u003eNot included: gears, bearings, motor, PTFE coupler, screws\u003c\/li\u003e\n\u003cli\u003ePrinted to order in the Netherlands\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eDesign: JaredC01, published under GPLv3 at github.com\/JaredC01\/Galileo2. I print and pack the parts; the design is theirs.\u003c\/p\u003e\n\u003chr\u003e\n\u003cp\u003e\u003cstrong\u003eRelated reading:\u003c\/strong\u003e \u003ca href=\"\/blogs\/blogs\/which-voron-toolhead-printed-parts-kit\"\u003eWhich Voron toolhead printed parts kit do you need?\u003c\/a\u003e\u003c\/p\u003e","brand":"Pjotr3DShop","offers":[{"title":"Default Title","offer_id":55001626116423,"sku":"VRN-KIT-G2","price":14.95,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0878\/0575\/5719\/files\/galileo-2-extruder-printed-parts-kit-abs-two-colours-9378936.png?v=1789351452"},{"product_id":"e3d-revo-voron-coldside","title":"E3D Revo Voron Coldside — Revo Heatsink for Stealthburner","description":"\u003cp\u003eThe Revo heatsink E3D developed with the Voron Design team for the Stealthburner: a red anodised sink that bolts rigidly to the toolhead with four M3 bolts and takes any Revo nozzle. Nozzle changes are done cold, by hand, in under a minute, with no tools and no hot tightening.\u003c\/p\u003e\n\u003cp\u003eThis is the coldside only. Pair it with a \u003ca href=\"\/products\/e3d-revo-hotside-kit-24v\"\u003eRevo Hotside Kit\u003c\/a\u003e for the HeaterCore and nozzles and you have a complete hotend: Starter for PLA, PETG and ASA at normal speeds, High Flow if you want to print fast, High Flow X if you also print carbon- or glass-filled filament.\u003c\/p\u003e\n\u003ch3\u003eFits\u003c\/h3\u003e\n\u003cp\u003eVoron 2.4, Trident, Switchwire, V1, V0.1 and Legacy, on the Stealthburner and other Revo-compatible toolheads. About 25 g of sink, 1.75 mm filament, 300 °C max with a standard HeaterCore.\u003c\/p\u003e\n\u003ch3\u003eWhat's in the box\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e1 × Revo Voron heatsink\u003c\/li\u003e\n\u003cli\u003e1 × heater extension cable\u003c\/li\u003e\n\u003cli\u003e1 × thermistor extension cable\u003c\/li\u003e\n\u003cli\u003e1 × 100 mm PTFE tube\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003ePrinted parts and mounting instructions are on \u003ca href=\"https:\/\/docs.vorondesign.com\/\" rel=\"noopener\"\u003edocs.vorondesign.com\u003c\/a\u003e. You may need to re-set your Z offset after a nozzle change. E3D part number REVO-VORON-COLD.\u003c\/p\u003e","brand":"E3D","offers":[{"title":"Default Title","offer_id":55033780306247,"sku":"E3D-REVO-VORON-COLD","price":43.95,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0878\/0575\/5719\/files\/e3d-revo-voron-coldside-revo-heatsink-for-stealthburner-2418730.png?v=1789516639"},{"product_id":"e3d-revo-hotside-kit-24v","title":"E3D Revo Hotside Kit, 24V — Starter, High Flow or High Flow X","description":"\u003cp\u003eThe heating half of a Revo hotend: a HeaterCore plus nozzles, matched to how you print. Add it to any Revo coldside (Voron, Six, Prusa, Creality, Hemera XS, Roto) and you're done. All three kits are 24 V.\u003c\/p\u003e\n\u003ch3\u003eWhich one?\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eStarter\u003c\/strong\u003e: 40 W HeaterCore and a 0.6 mm brass nozzle, plus a free 0.4 mm brass nozzle. PLA, PETG and ASA at normal speeds.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHigh Flow\u003c\/strong\u003e: 60 W HeaterCore with 0.4 and 0.6 mm High Flow brass nozzles (roughly 70 % more flow than standard Revo), plus a free 0.4 mm brass nozzle and a Fully Loaded sock pack. For printing fast and big.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHigh Flow X\u003c\/strong\u003e: 60 W HeaterCore with 0.4 and 0.6 mm High Flow ObXidian nozzles (E3DLC-coated, about 55 % more flow), plus the same free brass nozzle and sock pack. For carbon- and glass-filled filament at speed.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eEvery Revo nozzle is a factory-assembled nozzle and heatbreak in one, so there is nothing to hot-tighten. 300 °C max. E3D part numbers REVO-HOT-KIT-24V, REVO-HOT-KIT-HF-24V and REVO-HOT-KIT-HF-X-24V.\u003c\/p\u003e\n\u003cp\u003eNo coldside yet? For a Voron, the \u003ca href=\"\/products\/e3d-revo-voron-coldside\"\u003eRevo Voron Coldside\u003c\/a\u003e is the one.\u003c\/p\u003e","brand":"E3D","offers":[{"title":"Starter (40 W)","offer_id":55033788432711,"sku":"E3D-REVO-HOT-KIT-24V","price":58.95,"currency_code":"EUR","in_stock":true},{"title":"High Flow (60 W)","offer_id":55033788465479,"sku":"E3D-REVO-HOT-KIT-HF-24V","price":129.95,"currency_code":"EUR","in_stock":true},{"title":"High Flow X (60 W, ObXidian)","offer_id":55033788498247,"sku":"E3D-REVO-HOT-KIT-HF-X-24V","price":187.95,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0878\/0575\/5719\/files\/e3d-revo-hotside-kit-24v-starter-high-flow-or-high-flow-x-3442739.png?v=1789516636"},{"product_id":"e3d-revo-nozzle-brass","title":"E3D Revo Nozzle, Brass — 0.15 to 0.8 mm","description":"\u003cp\u003eThe standard Revo nozzle: nozzle and heatbreak in one factory-assembled part, so you screw it into any Revo coldside by hand, cold, and print. No tools, no hot tightening, no leaks from a bad assembly. A swap takes under a minute.\u003c\/p\u003e\n\u003cp\u003eSizes 0.15, 0.25, 0.4, 0.6 and 0.8 mm. Each comes with a colour-coded silicone sock and the size engraved on the nozzle, so you can tell them apart in the drawer.\u003c\/p\u003e\n\u003ch3\u003eFits\u003c\/h3\u003e\n\u003cp\u003eEvery Revo coldside: Revo Voron, Six, Micro, CR, Hemera XS, the Prusa MK3 and Mini editions, Roto. Not compatible with V6-style heater blocks. 1.75 mm filament, 300 °C max, 13 mm diameter, 41 mm long.\u003c\/p\u003e\n\u003cp\u003eYou may need to re-set your Z offset after a swap. The 0.15 mm is a specialist nozzle that clogs more easily; read E3D's filament starter settings before you use it. Want more flow in the same shape? See the \u003ca href=\"\/products\/e3d-revo-high-flow-nozzle-brass\"\u003eRevo High Flow nozzle\u003c\/a\u003e. E3D part numbers RC-NOZZLE-0150 to RC-NOZZLE-0800-AS-SPK.\u003c\/p\u003e","brand":"E3D","offers":[{"title":"0.15 mm","offer_id":55033794691399,"sku":"E3D-RC-NOZZLE-0150-AS-SPK","price":26.95,"currency_code":"EUR","in_stock":true},{"title":"0.25 mm","offer_id":55033794724167,"sku":"E3D-RC-NOZZLE-0250-AS-SPK","price":26.95,"currency_code":"EUR","in_stock":true},{"title":"0.4 mm","offer_id":55033794756935,"sku":"E3D-RC-NOZZLE-0400-AS-SPK","price":26.95,"currency_code":"EUR","in_stock":true},{"title":"0.6 mm","offer_id":55033794789703,"sku":"E3D-RC-NOZZLE-0600-AS-SPK","price":26.95,"currency_code":"EUR","in_stock":true},{"title":"0.8 mm","offer_id":55033794822471,"sku":"E3D-RC-NOZZLE-0800-AS-SPK","price":26.95,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0878\/0575\/5719\/files\/e3d-revo-nozzle-brass-015-to-08-mm-2395261.png?v=1789516639"},{"product_id":"e3d-revo-high-flow-nozzle-brass","title":"E3D Revo High Flow Nozzle, Brass — 0.4 to 1.4 mm","description":"\u003cp\u003eSame size and shape as a standard Revo nozzle, so nothing on your toolhead changes, but with E3D's internal high-flow geometry: more surface area, better heat transfer, roughly 70 % more volumetric flow. Screw it in cold, by hand, and print faster or bigger.\u003c\/p\u003e\n\u003cp\u003eSizes 0.4, 0.6, 0.8, 1.0, 1.2 and 1.4 mm. The nozzle is engraved with its size and \"HF\", and the high-flow insert shows as a circle on the tip.\u003c\/p\u003e\n\u003ch3\u003eFits\u003c\/h3\u003e\n\u003cp\u003eRevo Voron, Six, Micro, CR, Hemera XS, Prusa MK3 and Mini editions, Roto, MicroSwiss NG and Biqu H2 V2. 1.75 mm filament, 300 °C max, 24 V. A 40 W HeaterCore works for most materials; for polycarbonate and other hot filaments the 60 W core gets the most out of it. Not compatible with V6-style heater blocks.\u003c\/p\u003e\n\u003cp\u003eYou may need to re-set your Z offset after a swap. E3D's measured flow rates per size and material are in its \u003ca href=\"https:\/\/e3d-online.com\/blogs\/help-centre\/revo-nozzle-maximum-flow-rates\" rel=\"noopener\"\u003eflow rate documentation\u003c\/a\u003e. E3D part numbers RC-NOZZLE-HF-0400 to RC-NOZZLE-HF-1400-AS-SPK.\u003c\/p\u003e","brand":"E3D","offers":[{"title":"0.4 mm","offer_id":55033803440455,"sku":"E3D-RC-NOZZLE-HF-0400-AS-SPK","price":47.95,"currency_code":"EUR","in_stock":true},{"title":"0.6 mm","offer_id":55033803473223,"sku":"E3D-RC-NOZZLE-HF-0600-AS-SPK","price":47.95,"currency_code":"EUR","in_stock":true},{"title":"0.8 mm","offer_id":55033803505991,"sku":"E3D-RC-NOZZLE-HF-0800-AS-SPK","price":47.95,"currency_code":"EUR","in_stock":true},{"title":"1.0 mm","offer_id":55033803538759,"sku":"E3D-RC-NOZZLE-HF-1000-AS-SPK","price":47.95,"currency_code":"EUR","in_stock":true},{"title":"1.2 mm","offer_id":55033803571527,"sku":"E3D-RC-NOZZLE-HF-1200-AS-SPK","price":47.95,"currency_code":"EUR","in_stock":true},{"title":"1.4 mm","offer_id":55033803604295,"sku":"E3D-RC-NOZZLE-HF-1400-AS-SPK","price":47.95,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0878\/0575\/5719\/files\/e3d-revo-high-flow-nozzle-brass-04-to-14-mm-8060027.jpg?v=1789516641"},{"product_id":"e3d-revo-obxidian-nozzle","title":"E3D Revo ObXidian Nozzle — Abrasion-Resistant, 0.25 to 0.8 mm","description":"\u003cp\u003eE3D's hardest Revo nozzle: a tool-steel tip with the E3DLC coating on a copper-alloy body. It shrugs off the carbon- and glass-filled filament that eats brass, and because the body conducts heat like brass you keep your existing slicer profiles. The coating is non-stick too, so less plastic builds up on the nozzle.\u003c\/p\u003e\n\u003cp\u003eSizes 0.25, 0.4, 0.6 and 0.8 mm. Nozzle and heatbreak in one factory-assembled part, swapped cold by hand. Skip the 0.25 mm for fibre-filled filament: the fibres are often larger than the hole.\u003c\/p\u003e\n\u003ch3\u003eFits\u003c\/h3\u003e\n\u003cp\u003eEvery Revo coldside. 1.75 mm filament, 300 °C max. Not compatible with V6-style heater blocks. Filaments with very aggressive fillers (Polymaker Fiberon PA-CF and PA-GF and the like) wear even ObXidian over time; for those, look at High Temp Abrasive or DiamondBack.\u003c\/p\u003e\n\u003cp\u003eNeed flow as well? See the \u003ca href=\"\/products\/e3d-revo-high-flow-obxidian-nozzle\"\u003eRevo High Flow ObXidian nozzle\u003c\/a\u003e. E3D part numbers RC-NOZZLE-OBX-0250 to RC-NOZZLE-OBX-0800-AS-SPK.\u003c\/p\u003e","brand":"E3D","offers":[{"title":"0.25 mm","offer_id":55033809240391,"sku":"E3D-RC-NOZZLE-OBX-0250-AS-SPK","price":70.95,"currency_code":"EUR","in_stock":true},{"title":"0.4 mm","offer_id":55033809273159,"sku":"E3D-RC-NOZZLE-OBX-0400-AS-SPK","price":70.95,"currency_code":"EUR","in_stock":true},{"title":"0.6 mm","offer_id":55033809305927,"sku":"E3D-RC-NOZZLE-OBX-0600-AS-SPK","price":70.95,"currency_code":"EUR","in_stock":true},{"title":"0.8 mm","offer_id":55033809338695,"sku":"E3D-RC-NOZZLE-OBX-0800-AS-SPK","price":70.95,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0878\/0575\/5719\/files\/e3d-revo-obxidian-nozzle-abrasion-resistant-025-to-08-mm-9737533.png?v=1789516642"},{"product_id":"e3d-revo-high-flow-obxidian-nozzle","title":"E3D Revo High Flow ObXidian Nozzle — 0.4 to 1.4 mm","description":"\u003cp\u003eObXidian's wear resistance and E3DLC non-stick coating combined with the Revo high-flow core: abrasive filament, printed fast. Same form factor as every other Revo nozzle, so nothing on the toolhead changes. Screw it in cold, by hand.\u003c\/p\u003e\n\u003cp\u003eSizes 0.4, 0.6, 0.8, 1.0, 1.2 and 1.4 mm. For everyday PLA and PETG the plain \u003ca href=\"\/products\/e3d-revo-high-flow-nozzle-brass\"\u003eHigh Flow brass nozzle\u003c\/a\u003e is the cheaper choice; this one is for carbon and glass fibre.\u003c\/p\u003e\n\u003ch3\u003eFits\u003c\/h3\u003e\n\u003cp\u003eEvery Revo coldside. 1.75 mm filament, 300 °C max, 24 V; a 60 W HeaterCore gets the most out of it. Not compatible with V6-style heater blocks. Filaments with very aggressive fillers still wear it over time.\u003c\/p\u003e\n\u003cp\u003eYou may need to re-set your Z offset after a swap. E3D part numbers RC-NOZZLE-HF-OBX-0400 to RC-NOZZLE-HF-OBX-1400-AS-SPK.\u003c\/p\u003e","brand":"E3D","offers":[{"title":"0.4 mm","offer_id":55033816285511,"sku":"E3D-RC-NOZZLE-HF-OBX-0400-AS-SPK","price":75.95,"currency_code":"EUR","in_stock":true},{"title":"0.6 mm","offer_id":55033816318279,"sku":"E3D-RC-NOZZLE-HF-OBX-0600-AS-SPK","price":75.95,"currency_code":"EUR","in_stock":true},{"title":"0.8 mm","offer_id":55033816351047,"sku":"E3D-RC-NOZZLE-HF-OBX-0800-AS-SPK","price":75.95,"currency_code":"EUR","in_stock":true},{"title":"1.0 mm","offer_id":55033816383815,"sku":"E3D-RC-NOZZLE-HF-OBX-1000-AS-SPK","price":75.95,"currency_code":"EUR","in_stock":true},{"title":"1.2 mm","offer_id":55033816416583,"sku":"E3D-RC-NOZZLE-HF-OBX-1200-AS-SPK","price":75.95,"currency_code":"EUR","in_stock":true},{"title":"1.4 mm","offer_id":55033816449351,"sku":"E3D-RC-NOZZLE-HF-OBX-1400-AS-SPK","price":75.95,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0878\/0575\/5719\/files\/e3d-revo-high-flow-obxidian-nozzle-04-to-14-mm-7777609.png?v=1789516640"},{"product_id":"e3d-high-flow-obxidian-hotend-bambu-a1","title":"E3D High Flow ObXidian HotEnd for Bambu Lab A1, A1 Mini \u0026 A2L","description":"\u003cp\u003eA drop-in HotEnd upgrade for the Bambu Lab A1, A1 Mini and A2L, made by E3D under official licence from Bambu Lab. The nozzle carries E3D's ObXidian tool-steel tip with the E3DLC coating, so carbon- and glass-filled filament stops eating your nozzle, and the reshaped internal geometry pushes up to 70% more flow than the stock HotEnd.\u003c\/p\u003e\n\u003cp\u003eThe coating is non-stick as well: less plastic creeping up the nozzle, fewer crashes, easier cleaning. It installs like the stock part — unclip the old HotEnd, slot this one in. Heater and thermistor wiring stay in the toolhead, so there is nothing to solder and no mount or part-cooling change.\u003c\/p\u003e\n\u003ch3\u003eFits\u003c\/h3\u003e\n\u003cp\u003eBambu Lab A1, A1 Mini and A2L. 1.75 mm filament, 300 °C max. \u003cstrong\u003eNot\u003c\/strong\u003e compatible with the H2 series or with X1\/P1 machines — for those see the \u003ca href=\"\/products\/e3d-high-flow-obxidian-complete-hotend-bambu-x1-p1\"\u003eX1 \u0026amp; P1 version\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch3\u003eGood to know\u003c\/h3\u003e\n\u003cp\u003eVery aggressive fillers (Polymaker's Fiberon PA-CF and PA-GF and the like) will wear even ObXidian over time; for those, DiamondBack is the set-and-forget option. And skip 0.4 mm for heavily filled filament — the fibres are often close to the hole size.\u003c\/p\u003e\n\u003cp\u003eE3D part numbers BAMBU-HF-OBX-A1-0400-SPK and BAMBU-HF-OBX-A1-0600-SPK.\u003c\/p\u003e","brand":"E3D","offers":[{"title":"0.4 mm","offer_id":55035228586311,"sku":"E3D-BAMBU-HF-OBX-A1-0400-SPK","price":64.95,"currency_code":"EUR","in_stock":true},{"title":"0.6 mm","offer_id":55035228619079,"sku":"E3D-BAMBU-HF-OBX-A1-0600-SPK","price":64.95,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0878\/0575\/5719\/files\/e3d-high-flow-obxidian-hotend-for-bambu-lab-a1-a1-mini-a2l-2278041.png?v=1789516644"},{"product_id":"e3d-diamondback-hotend-bambu-a1","title":"E3D DiamondBack HotEnd for Bambu Lab A1, A1 Mini \u0026 A2L","description":"\u003cp\u003eThe nozzle you buy once. A solid polycrystalline-diamond (PCD) tip — not a coating — in a HotEnd that drops straight into the Bambu Lab A1, A1 Mini or A2L. Made by E3D with DiamondBack, under official licence from Bambu Lab.\u003c\/p\u003e\n\u003cp\u003eDiamond is the hardest material there is, so metal-, ceramic- and fibre-filled filaments simply don't wear it the way they chew through brass or hardened steel. PCD also conducts heat exceptionally well, which helps layer adhesion, and the polished tip leaves noticeably smoother top surfaces — a bit like ironing, for free.\u003c\/p\u003e\n\u003ch3\u003eFits\u003c\/h3\u003e\n\u003cp\u003eBambu Lab A1, A1 Mini and A2L. 1.75 mm filament, rated to 320 °C. \u003cstrong\u003eNot\u003c\/strong\u003e compatible with the H2 series. Your existing slicer profiles work as-is, and Bambu Lab approved these officially, so your printer warranty stays intact.\u003c\/p\u003e\n\u003ch3\u003eDiamondBack or ObXidian?\u003c\/h3\u003e\n\u003cp\u003eIf you print abrasives now and then, the cheaper \u003ca href=\"\/products\/e3d-high-flow-obxidian-hotend-bambu-a1\"\u003eHigh Flow ObXidian A1 HotEnd\u003c\/a\u003e is plenty. If aggressive filled filament is what your machine runs on day in, day out, DiamondBack is the one that stops the nozzle conversation for good.\u003c\/p\u003e\n\u003cp\u003eSkip 0.4 mm for heavily filled filament — the fibres are often close to the hole size. E3D part numbers BAMBU-DIAMOND-A1-AS-0400-SPK and BAMBU-DIAMOND-A1-AS-0600-SPK.\u003c\/p\u003e","brand":"E3D","offers":[{"title":"0.4 mm","offer_id":55035229372743,"sku":"E3D-BAMBU-DIAMOND-A1-AS-0400-SPK","price":108.95,"currency_code":"EUR","in_stock":true},{"title":"0.6 mm","offer_id":55035229405511,"sku":"E3D-BAMBU-DIAMOND-A1-AS-0600-SPK","price":108.95,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0878\/0575\/5719\/files\/e3d-diamondback-hotend-for-bambu-lab-a1-a1-mini-a2l-5900650.png?v=1789516637"},{"product_id":"e3d-high-flow-obxidian-hotend-nozzle-bambu-x1-p1","title":"E3D High Flow ObXidian HotEnd with Nozzle for Bambu Lab X1 \u0026 P1","description":"\u003cp\u003eThe metal-only version: HotEnd body and ObXidian nozzle, for anyone reusing the fan and heater from their current Bambu HotEnd. Made by E3D under official licence from Bambu Lab — they are the only approved manufacturer of aftermarket Bambu HotEnds.\u003c\/p\u003e\n\u003cp\u003eInside is E3D's patent-pending high-flow nozzle geometry, first developed for Revo, good for about 60% more volumetric flow than stock. The E3DLC coating on nozzle and heater block adds abrasion resistance for fibre-filled filament and keeps plastic from sticking where it shouldn't.\u003c\/p\u003e\n\u003ch3\u003eWhat's in the box\u003c\/h3\u003e\n\u003cp\u003eMetal-only HotEnd, thermal paste, silicone sock, HotEnd clip and fixings. No fan and no heater — you move those over from your existing HotEnd. Want the complete drop-in instead? Take the \u003ca href=\"\/products\/e3d-high-flow-obxidian-complete-hotend-bambu-x1-p1\"\u003ecomplete HotEnd\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch3\u003eFits\u003c\/h3\u003e\n\u003cp\u003eBambu Lab X1, X1 Carbon, P1P and P1S. 1.75 mm filament, 300 °C max. \u003cstrong\u003eNot\u003c\/strong\u003e compatible with the X1E, the A1 series or the H2 series.\u003c\/p\u003e\n\u003cp\u003eVery aggressive fillers (Polymaker's Fiberon PA-CF and PA-GF and the like) will wear even ObXidian over time. E3D part numbers BAMBU-HF-OBX-MO-0400-SPK and BAMBU-HF-OBX-MO-0600-SPK.\u003c\/p\u003e","brand":"E3D","offers":[{"title":"0.4 mm","offer_id":55035229503815,"sku":"E3D-BAMBU-HF-OBX-MO-0400-SPK","price":86.95,"currency_code":"EUR","in_stock":true},{"title":"0.6 mm","offer_id":55035229536583,"sku":"E3D-BAMBU-HF-OBX-MO-0600-SPK","price":86.95,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0878\/0575\/5719\/files\/e3d-high-flow-obxidian-hotend-with-nozzle-for-bambu-lab-x1-p1-6354329.png?v=1789516633"},{"product_id":"e3d-high-flow-obxidian-complete-hotend-bambu-x1-p1","title":"E3D High Flow ObXidian Complete HotEnd for Bambu Lab X1 \u0026 P1","description":"\u003cp\u003eEverything in one box: HotEnd, ObXidian nozzle, fan and heater, matched to your printer. Swap the whole assembly and you're printing again in about five minutes — no adjustment to the mount or part cooling, no soldering. E3D builds these under official licence from Bambu Lab, the only approved maker of aftermarket Bambu HotEnds.\u003c\/p\u003e\n\u003cp\u003eThe nozzle uses E3D's patent-pending high-flow geometry, first developed for Revo: roughly 60% more volumetric flow than stock. Push the flow limit up in the slicer, or keep your speeds and get more consistent extrusion — either way interlayer adhesion holds up, which is where fast printing usually loses out. The E3DLC coating on nozzle and heater block adds abrasion resistance and keeps plastic from building up.\u003c\/p\u003e\n\u003ch3\u003eWhat's in the box\u003c\/h3\u003e\n\u003cp\u003eMetal-only HotEnd, silicone sock, HotEnd clip, fan (P1 or X1 depending on your choice), heater and fixings.\u003c\/p\u003e\n\u003ch3\u003eFits\u003c\/h3\u003e\n\u003cp\u003ePick the X1-Carbon version for the X1 and X1 Carbon, the P1 version for the P1P and P1S. 1.75 mm filament, 300 °C max. \u003cstrong\u003eNot\u003c\/strong\u003e compatible with the X1E, the A1 series or the H2 series.\u003c\/p\u003e\n\u003ch3\u003eGood to know\u003c\/h3\u003e\n\u003cp\u003eWant the harder, hotter-running nozzle? See the \u003ca href=\"\/products\/e3d-obxidian-500-complete-hotend-bambu-x1-p1\"\u003eObXiDian 500 version\u003c\/a\u003e, five times more wear-resistant and rated to 500 °C. E3D part numbers BAMBU-HF-OBX-X1-AS and BAMBU-HF-OBX-P1-AS.\u003c\/p\u003e","brand":"E3D","offers":[{"title":"X1 \/ X1 Carbon \/ 0.4 mm","offer_id":55035230716231,"sku":"E3D-BAMBU-HF-OBX-X1-AS-0400-SPK","price":129.95,"currency_code":"EUR","in_stock":true},{"title":"X1 \/ X1 Carbon \/ 0.6 mm","offer_id":55035230748999,"sku":"E3D-BAMBU-HF-OBX-X1-AS-0600-SPK","price":129.95,"currency_code":"EUR","in_stock":true},{"title":"P1P \/ P1S \/ 0.4 mm","offer_id":55035230781767,"sku":"E3D-BAMBU-HF-OBX-P1-AS-0400-SPK","price":129.95,"currency_code":"EUR","in_stock":true},{"title":"P1P \/ P1S \/ 0.6 mm","offer_id":55035230814535,"sku":"E3D-BAMBU-HF-OBX-P1-AS-0600-SPK","price":129.95,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0878\/0575\/5719\/files\/e3d-high-flow-obxidian-complete-hotend-for-bambu-lab-x1-p1-9752364.png?v=1789516644"},{"product_id":"e3d-obxidian-500-complete-hotend-bambu-x1-p1","title":"E3D ObXiDian 500 Complete HotEnd for Bambu Lab X1, P1 \u0026 X1E","description":"\u003cp\u003eE3D's newest Bambu HotEnd, and the one I'd buy if I printed filled filament regularly. ObXiDian 500 is at least five times more wear-resistant than standard ObXidian, and where ObXidian stops at 300 °C this one is rated to 500 °C — you'll hit your printer's limit long before the nozzle's. Built by E3D under official licence from Bambu Lab.\u003c\/p\u003e\n\u003cp\u003eThe nozzle uses a four-channel internal insert that improves heat transfer into the filament and lifts volumetric flow by up to 60%. Most abrasive materials, glow-in-the-dark included, simply won't wear it. The low-surface-energy coating keeps plastic from building up on the tip, which means easier cleaning and fewer crashes.\u003c\/p\u003e\n\u003ch3\u003eWhat you get\u003c\/h3\u003e\n\u003cp\u003eA complete HotEnd with fan and heater matched to your printer. Same form factor as the stock Bambu part, so it drops in with no change to the mount or part cooling.\u003c\/p\u003e\n\u003ch3\u003eFits\u003c\/h3\u003e\n\u003cp\u003eChoose X1C for the X1 Carbon, P1 for the P1P and P1S, or X1E for the X1E. 1.75 mm filament. \u003cstrong\u003eNot\u003c\/strong\u003e compatible with the A1 series or the H2 series. Max print temperature is still your machine's: 320 °C on the X1E, 300 °C on X1C, P1P and P1S.\u003c\/p\u003e\n\u003ch3\u003eObXiDian 500 or ObXidian?\u003c\/h3\u003e\n\u003cp\u003ePrint abrasives occasionally and the \u003ca href=\"\/products\/e3d-high-flow-obxidian-complete-hotend-bambu-x1-p1\"\u003eHigh Flow ObXidian HotEnd\u003c\/a\u003e is enough and costs less. Print them constantly and the 500 pays for itself in nozzles you don't replace. E3D part numbers BAMBU-HF-OBD-X1, -P1 and -X1E.\u003c\/p\u003e","brand":"E3D","offers":[{"title":"X1 Carbon \/ 0.4 mm","offer_id":55035232452935,"sku":"E3D-BAMBU-HF-OBD-X1-0400-SPK","price":158.95,"currency_code":"EUR","in_stock":true},{"title":"X1 Carbon \/ 0.6 mm","offer_id":55035232485703,"sku":"E3D-BAMBU-HF-OBD-X1-0600-SPK","price":158.95,"currency_code":"EUR","in_stock":true},{"title":"P1P \/ P1S \/ 0.4 mm","offer_id":55035232518471,"sku":"E3D-BAMBU-HF-OBD-P1-0400-SPK","price":158.95,"currency_code":"EUR","in_stock":true},{"title":"P1P \/ P1S \/ 0.6 mm","offer_id":55035232551239,"sku":"E3D-BAMBU-HF-OBD-P1-0600-SPK","price":158.95,"currency_code":"EUR","in_stock":true},{"title":"X1E \/ 0.4 mm","offer_id":55035232584007,"sku":"E3D-BAMBU-HF-OBD-X1E-0400-SPK","price":173.95,"currency_code":"EUR","in_stock":true},{"title":"X1E \/ 0.6 mm","offer_id":55035232616775,"sku":"E3D-BAMBU-HF-OBD-X1E-0600-SPK","price":173.95,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0878\/0575\/5719\/files\/e3d-obxidian-500-complete-hotend-for-bambu-lab-x1-p1-x1e-9240019.png?v=1789516641"},{"product_id":"e3d-diamondback-hotend-bambu-x1-p1","title":"E3D DiamondBack HotEnd for Bambu Lab X1C, X1E, P1P \u0026 P1S","description":"\u003cp\u003eThe last nozzle your Bambu will need. A solid polycrystalline-diamond (PCD) tip — a real diamond insert, not a coating — in a complete HotEnd that drops into the X1 Carbon, X1E, P1P or P1S. An official collaboration between E3D, DiamondBack and Bambu Lab.\u003c\/p\u003e\n\u003cp\u003ePCD is thousands of diamond crystals bonded diamond-to-diamond, which keeps diamond's hardness without the brittleness of a single crystal. Metal-, ceramic- and fibre-filled filaments that destroy brass and steadily wear hardened steel barely touch it. It also conducts heat better than anything else in a nozzle, so layer adhesion improves, and the polished tip plus low friction leaves top layers looking almost ironed.\u003c\/p\u003e\n\u003ch3\u003eFits\u003c\/h3\u003e\n\u003cp\u003ePick the version matching your machine — X1 Carbon, P1P\/P1S or X1E — each ships with the right connector. 1.75 mm filament. Drop-in fit: no change to the mount or part cooling. Bambu Lab approved it officially, so your warranty stays intact. \u003cstrong\u003eNot\u003c\/strong\u003e compatible with the A1 or H2 series.\u003c\/p\u003e\n\u003ch3\u003eDiamondBack or ObXidian?\u003c\/h3\u003e\n\u003cp\u003eOccasional carbon fibre? The \u003ca href=\"\/products\/e3d-high-flow-obxidian-complete-hotend-bambu-x1-p1\"\u003eHigh Flow ObXidian HotEnd\u003c\/a\u003e costs a lot less and adds flow rate. Aggressive filled filament around the clock? DiamondBack is the set-and-forget one. Note it isn't a high-flow nozzle — if you want both hardness and flow, look at the \u003ca href=\"\/products\/e3d-obxidian-500-complete-hotend-bambu-x1-p1\"\u003eObXiDian 500\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003eSkip 0.4 mm for heavily filled filament — the fibres are often close to the hole size. E3D part numbers BAMBU-DIAMOND-X1-AS, -P1-AS and -X1E-AS.\u003c\/p\u003e","brand":"E3D","offers":[{"title":"X1 Carbon \/ 0.4 mm","offer_id":55035233304903,"sku":"E3D-BAMBU-DIAMOND-X1-AS-0400-SPK","price":180.95,"currency_code":"EUR","in_stock":true},{"title":"X1 Carbon \/ 0.6 mm","offer_id":55035233337671,"sku":"E3D-BAMBU-DIAMOND-X1-AS-0600-SPK","price":180.95,"currency_code":"EUR","in_stock":true},{"title":"X1 Carbon \/ 0.8 mm","offer_id":55035233370439,"sku":"E3D-BAMBU-DIAMOND-X1-AS-0800-SPK","price":180.95,"currency_code":"EUR","in_stock":true},{"title":"P1P \/ P1S \/ 0.4 mm","offer_id":55035233403207,"sku":"E3D-BAMBU-DIAMOND-P1-AS-0400-SPK","price":180.95,"currency_code":"EUR","in_stock":true},{"title":"P1P \/ P1S \/ 0.6 mm","offer_id":55035233435975,"sku":"E3D-BAMBU-DIAMOND-P1-AS-0600-SPK","price":180.95,"currency_code":"EUR","in_stock":true},{"title":"P1P \/ P1S \/ 0.8 mm","offer_id":55035233468743,"sku":"E3D-BAMBU-DIAMOND-P1-AS-0800-SPK","price":180.95,"currency_code":"EUR","in_stock":true},{"title":"X1E \/ 0.4 mm","offer_id":55035233501511,"sku":"E3D-BAMBU-DIAMOND-X1E-AS-0400-SPK","price":180.95,"currency_code":"EUR","in_stock":true},{"title":"X1E \/ 0.6 mm","offer_id":55035233534279,"sku":"E3D-BAMBU-DIAMOND-X1E-AS-0600-SPK","price":180.95,"currency_code":"EUR","in_stock":true},{"title":"X1E \/ 0.8 mm","offer_id":55035233567047,"sku":"E3D-BAMBU-DIAMOND-X1E-AS-0800-SPK","price":180.95,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0878\/0575\/5719\/files\/e3d-diamondback-hotend-for-bambu-lab-x1c-x1e-p1p-p1s-2269396.png?v=1789516643"},{"product_id":"e3d-obxidian-500-hotend-bambu-h2-p2-x2","title":"E3D ObXiDian 500 HotEnd for Bambu Lab H2, P2, X2 \u0026 A2","description":"\u003cp\u003eThe HotEnd upgrade for Bambu's newest machines — the H2 and P2 series and the X2D. E3D builds these under official licence from Bambu Lab, and ObXiDian 500 is their hardest nozzle coating yet: at least five times more wear-resistant than standard ObXidian, and rated to 500 °C where ObXidian stops at 300.\u003c\/p\u003e\n\u003cp\u003eThe four-channel internal insert improves heat transfer into the filament and lifts volumetric flow by up to 60%. Most abrasives — carbon fibre, glass fibre, even glow-in-the-dark — simply won't wear it. The low-surface-energy coating keeps plastic off the tip, so cleaning is easier and you get fewer crashes.\u003c\/p\u003e\n\u003ch3\u003eFits\u003c\/h3\u003e\n\u003cp\u003eBambu Lab H2D, H2C, H2S, P2S, X2D and A2L. 1.75 mm filament. Same form factor as the stock HotEnd, so it drops in with no change to the mount or part cooling. \u003cstrong\u003eNot\u003c\/strong\u003e compatible with the X1\/P1 or A1 series — for those see the \u003ca href=\"\/products\/e3d-obxidian-500-complete-hotend-bambu-x1-p1\"\u003eX1 \u0026amp; P1 version\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch3\u003eGood to know\u003c\/h3\u003e\n\u003cp\u003eYour printer's own limit still applies, not the nozzle's. Want the absolute hardest tip instead of flow? The \u003ca href=\"\/products\/e3d-diamondback-hotend-bambu-h2-p2-x2\"\u003eDiamondBack for the same machines\u003c\/a\u003e uses a solid diamond. E3D part numbers BAMBU-HF-OBD-H2-P2-0400-SPK and -0600-SPK.\u003c\/p\u003e","brand":"E3D","offers":[{"title":"0.4 mm","offer_id":55037134995783,"sku":"E3D-BAMBU-HF-OBD-H2-P2-0400-SPK","price":129.95,"currency_code":"EUR","in_stock":true},{"title":"0.6 mm","offer_id":55037135028551,"sku":"E3D-BAMBU-HF-OBD-H2-P2-0600-SPK","price":129.95,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0878\/0575\/5719\/files\/e3d-obxidian-500-hotend-for-bambu-lab-h2-p2-x2-a2-9880552.png?v=1789516642"},{"product_id":"e3d-diamondback-hotend-bambu-h2-p2-x2","title":"E3D DiamondBack HotEnd for Bambu Lab H2, P2, X2 \u0026 A2","description":"\u003cp\u003eA solid polycrystalline-diamond (PCD) tip — a real diamond insert, not a coating — in a HotEnd that drops straight into Bambu's H2 and P2 series and the X2D. An official collaboration between E3D, DiamondBack and Bambu Lab.\u003c\/p\u003e\n\u003cp\u003ePCD is thousands of diamond crystals bonded diamond-to-diamond: it keeps diamond's hardness without the brittleness of a single crystal. Metal-, ceramic- and fibre-filled filaments that destroy brass and steadily wear hardened steel barely touch it. It also conducts heat better than anything else in a nozzle, which helps layer adhesion, and the polished tip leaves top surfaces looking almost ironed.\u003c\/p\u003e\n\u003ch3\u003eFits\u003c\/h3\u003e\n\u003cp\u003eBambu Lab H2D, H2C, H2S, P2S, X2D and A2L. 1.75 mm filament. Drop-in: no change to the mount or part cooling, and your existing slicer profiles keep working. Bambu Lab approved it officially, so your printer warranty stays intact. \u003cstrong\u003eNot\u003c\/strong\u003e compatible with the X1\/P1 or A1 series — for those see the \u003ca href=\"\/products\/e3d-diamondback-hotend-bambu-x1-p1\"\u003eX1 \u0026amp; P1 version\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch3\u003eFour sizes, and which to skip\u003c\/h3\u003e\n\u003cp\u003e0.2, 0.4, 0.6 and 0.8 mm. Skip 0.2 and 0.4 for heavily filled filament — the fibres are often close to the hole size. Want flow as well as hardness? The \u003ca href=\"\/products\/e3d-obxidian-500-hotend-bambu-h2-p2-x2\"\u003eObXiDian 500 for the same machines\u003c\/a\u003e costs less and adds up to 60% flow rate.\u003c\/p\u003e\n\u003cp\u003eE3D part numbers BAMBU-DIAMOND-HP2-AS-0200-SPK through -0800-SPK.\u003c\/p\u003e","brand":"E3D","offers":[{"title":"0.2 mm","offer_id":55037137617223,"sku":"E3D-BAMBU-DIAMOND-HP2-AS-0200-SPK","price":173.95,"currency_code":"EUR","in_stock":true},{"title":"0.4 mm","offer_id":55037137649991,"sku":"E3D-BAMBU-DIAMOND-HP2-AS-0400-SPK","price":173.95,"currency_code":"EUR","in_stock":true},{"title":"0.6 mm","offer_id":55037137682759,"sku":"E3D-BAMBU-DIAMOND-HP2-AS-0600-SPK","price":173.95,"currency_code":"EUR","in_stock":true},{"title":"0.8 mm","offer_id":55037137715527,"sku":"E3D-BAMBU-DIAMOND-HP2-AS-0800-SPK","price":173.95,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0878\/0575\/5719\/files\/e3d-diamondback-hotend-for-bambu-lab-h2-p2-x2-a2-1530189.png?v=1789516635"},{"product_id":"e3d-revo-hta-nozzle","title":"E3D Revo HTA Nozzle — High Temp \u0026 Abrasion-Resistant, 0.25 to 0.8 mm","description":"\u003cp\u003eThe Revo nozzle for the filaments that beat everything else: high temperature and abrasion-resistant in one. A hardened steel tip on a copper carrier and spreader, coated in chromium nitride — so it takes the heat, shrugs off fibre fill, resists corrosion and doesn't let plastic stick.\u003c\/p\u003e\n\u003cp\u003eRated to 500 °C. That is the nozzle's limit, not your setup's: on a 40 W or 60 W HeaterCore you are capped at 300 °C, and you need a Revo High Temperature hotside to go beyond it. Worth knowing before you buy for PEEK or PEI.\u003c\/p\u003e\n\u003ch3\u003eFits\u003c\/h3\u003e\n\u003cp\u003eEvery Revo coldside. 1.75 mm filament. Nozzle and heatbreak are one factory-assembled part, so no hot-tightening and no leaks — swap it cold, by hand. Not compatible with V6-style heater blocks, and expect to re-check your Z offset after a swap.\u003c\/p\u003e\n\u003ch3\u003eHTA or ObXidian?\u003c\/h3\u003e\n\u003cp\u003eSimilar hardness, different reason to buy. \u003ca href=\"\/products\/e3d-revo-obxidian-nozzle\"\u003eObXidian\u003c\/a\u003e stops at 300 °C and costs less; HTA is what you want when the material is both abrasive \u003cem\u003eand\u003c\/em\u003e hot. For the hardest option of all, see the \u003ca href=\"\/products\/e3d-revo-obxidian-500-nozzle\"\u003eObXiDian 500\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003eHTA nozzles are grey with the size engraved. Very aggressive fillers (Polymaker's Fiberon PA-CF and PA-GF and the like) will wear even these over time. Skip 0.25 mm for anything fibre-filled. E3D part numbers RC-NOZZLE-HTA-AS-0250 to -0800-SPK.\u003c\/p\u003e","brand":"E3D","offers":[{"title":"0.25 mm","offer_id":55037179887943,"sku":"E3D-RC-NOZZLE-HTA-AS-0250-SPK","price":77.95,"currency_code":"EUR","in_stock":true},{"title":"0.4 mm","offer_id":55037179920711,"sku":"E3D-RC-NOZZLE-HTA-AS-0400-SPK","price":77.95,"currency_code":"EUR","in_stock":true},{"title":"0.6 mm","offer_id":55037179953479,"sku":"E3D-RC-NOZZLE-HTA-AS-0600-SPK","price":77.95,"currency_code":"EUR","in_stock":true},{"title":"0.8 mm","offer_id":55037179986247,"sku":"E3D-RC-NOZZLE-HTA-AS-0800-SPK","price":77.95,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0878\/0575\/5719\/files\/e3d-revo-hta-nozzle-high-temp-abrasion-resistant-025-to-08-mm-4774715.png?v=1789516634"},{"product_id":"e3d-revo-obxidian-500-nozzle","title":"E3D Revo ObXiDian 500 Nozzle — 0.4 to 0.8 mm","description":"\u003cp\u003eE3D's hardest Revo nozzle. ObXiDian 500 is at least five times more wear-resistant than standard ObXidian, and where ObXidian stops at 300 °C this one is rated to 500. Most abrasive filament — carbon fibre, glass fibre, even the UV-reactive glow-in-the-dark stuff that quietly destroys nozzles — simply won't wear it.\u003c\/p\u003e\n\u003cp\u003eThe coating has a low surface energy, so plastic doesn't build up on the tip: easier to clean between prints, and fewer crashes and cosmetic defects from a blob that grew where it shouldn't. Thermal performance is good enough that interlayer adhesion improves too.\u003c\/p\u003e\n\u003ch3\u003eFits\u003c\/h3\u003e\n\u003cp\u003eEvery Revo coldside. 1.75 mm filament. Nozzle and heatbreak in one factory-assembled part — no hot-tightening, no leaks, swapped cold by hand. Not compatible with V6-style heater blocks. Your printer's own maximum still applies: 500 °C is the nozzle's ceiling, not your hotside's.\u003c\/p\u003e\n\u003ch3\u003eObXiDian 500 or ObXidian?\u003c\/h3\u003e\n\u003cp\u003eIf you print abrasives now and then, \u003ca href=\"\/products\/e3d-revo-obxidian-nozzle\"\u003eObXidian\u003c\/a\u003e is plenty and costs less. If that is what your machine runs on, the 500 pays for itself in nozzles you don't replace. Need flow as well? See the \u003ca href=\"\/products\/e3d-revo-high-flow-obxidian-500-nozzle\"\u003eHigh Flow ObXiDian 500\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003eSkip 0.4 mm for heavily filled filament — the fibres are often close to the hole size. E3D part numbers RC-NOZZLE-OBD-AS-0400 to -0800-SPK.\u003c\/p\u003e","brand":"E3D","offers":[{"title":"0.4 mm","offer_id":55037180215623,"sku":"E3D-RC-NOZZLE-OBD-AS-0400-SPK","price":79.95,"currency_code":"EUR","in_stock":true},{"title":"0.6 mm","offer_id":55037180248391,"sku":"E3D-RC-NOZZLE-OBD-AS-0600-SPK","price":79.95,"currency_code":"EUR","in_stock":true},{"title":"0.8 mm","offer_id":55037180281159,"sku":"E3D-RC-NOZZLE-OBD-AS-0800-SPK","price":79.95,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0878\/0575\/5719\/files\/e3d-revo-obxidian-500-nozzle-04-to-08-mm-4387452.png?v=1789516636"},{"product_id":"e3d-revo-high-flow-obxidian-500-nozzle","title":"E3D Revo High Flow ObXiDian 500 Nozzle — 0.4 to 0.8 mm","description":"\u003cp\u003eBoth at once: E3D's hardest nozzle coating and their high-flow geometry. ObXiDian 500 is at least five times more wear-resistant than standard ObXidian and rated to 500 °C, and the four-channel internal insert pushes heat into the filament far better than a plain bore — so you can run abrasive material fast instead of choosing one or the other.\u003c\/p\u003e\n\u003cp\u003eSame form factor as every other Revo nozzle, so nothing on your toolhead changes. The low-surface-energy coating keeps plastic off the tip: less cleaning between prints, fewer crashes.\u003c\/p\u003e\n\u003ch3\u003eFits\u003c\/h3\u003e\n\u003cp\u003eEvery Revo coldside. 1.75 mm filament. Nozzle and heatbreak in one factory-assembled part, swapped cold by hand — no hot-tightening, no leaks. Not compatible with V6-style heater blocks. The 500 °C rating is the nozzle's; your hotside sets the real ceiling.\u003c\/p\u003e\n\u003ch3\u003eWhich one do you need?\u003c\/h3\u003e\n\u003cp\u003eFlow but not the extreme hardness: \u003ca href=\"\/products\/e3d-revo-high-flow-obxidian-nozzle\"\u003eHigh Flow ObXidian\u003c\/a\u003e, cheaper and good to 300 °C. Hardness but no need for speed: \u003ca href=\"\/products\/e3d-revo-obxidian-500-nozzle\"\u003eObXiDian 500\u003c\/a\u003e. Hot and abrasive rather than fast: \u003ca href=\"\/products\/e3d-revo-hta-nozzle\"\u003eHTA\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003eSkip 0.4 mm for heavily filled filament — the fibres are often close to the hole size. E3D part numbers RC-NOZZLE-HF-OBD-AS-0400 to -0800-SPK.\u003c\/p\u003e","brand":"E3D","offers":[{"title":"0.4 mm","offer_id":55037180641607,"sku":"E3D-RC-NOZZLE-HF-OBD-AS-0400-SPK","price":93.95,"currency_code":"EUR","in_stock":true},{"title":"0.6 mm","offer_id":55037180674375,"sku":"E3D-RC-NOZZLE-HF-OBD-AS-0600-SPK","price":93.95,"currency_code":"EUR","in_stock":true},{"title":"0.8 mm","offer_id":55037180707143,"sku":"E3D-RC-NOZZLE-HF-OBD-AS-0800-SPK","price":93.95,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0878\/0575\/5719\/files\/e3d-revo-high-flow-obxidian-500-nozzle-04-to-08-mm-6042143.png?v=1789516642"},{"product_id":"e3d-revo-high-flow-hta-nozzle","title":"E3D Revo High Flow HTA Nozzle — 0.4 to 1.4 mm","description":"\u003cp\u003eHigh temperature, high flow and abrasion-resistant in one nozzle. Hardened steel tip on a copper carrier and spreader, chromium-nitride coated for wear resistance and non-stick, with E3D's high-flow internal geometry on top — so hot abrasive filament goes through faster instead of slower.\u003c\/p\u003e\n\u003cp\u003eThe flow geometry unlocks 0.4, 0.6 and 0.8 mm at higher rates and adds 1.0, 1.2 and 1.4 mm, which is where this range gets interesting: big nozzles in a material that would normally chew through them.\u003c\/p\u003e\n\u003ch3\u003eFits\u003c\/h3\u003e\n\u003cp\u003eEvery Revo coldside, and the form factor is identical to a standard Revo nozzle so your mount and fan duct stay as they are. 1.75 mm filament. Nozzle and heatbreak in one factory-assembled part, swapped cold by hand. Not compatible with V6-style heater blocks, and re-check your Z offset after a swap.\u003c\/p\u003e\n\u003ch3\u003eAbout that 500 °C\u003c\/h3\u003e\n\u003cp\u003eIt is the nozzle's rating. On a 40 W or 60 W HeaterCore you are capped at 300 °C — to actually print that hot you need a Revo High Temperature hotside.\u003c\/p\u003e\n\u003ch3\u003eWhich one?\u003c\/h3\u003e\n\u003cp\u003eNo need for the big sizes or the heat: \u003ca href=\"\/products\/e3d-revo-hta-nozzle\"\u003eHTA\u003c\/a\u003e, cheaper. Abrasive but not hot: \u003ca href=\"\/products\/e3d-revo-high-flow-obxidian-nozzle\"\u003eHigh Flow ObXidian\u003c\/a\u003e. Hardest of all: \u003ca href=\"\/products\/e3d-revo-high-flow-obxidian-500-nozzle\"\u003eHigh Flow ObXiDian 500\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003eGrey, with the size engraved. Skip 0.4 mm for heavily filled filament. E3D part numbers RC-NOZZLE-HF-HTA-0400 to -1400-AS-SPK.\u003c\/p\u003e","brand":"E3D","offers":[{"title":"0.4 mm","offer_id":55037181591879,"sku":"E3D-RC-NOZZLE-HF-HTA-0400-AS-SPK","price":82.95,"currency_code":"EUR","in_stock":true},{"title":"0.6 mm","offer_id":55037181624647,"sku":"E3D-RC-NOZZLE-HF-HTA-0600-AS-SPK","price":82.95,"currency_code":"EUR","in_stock":true},{"title":"0.8 mm","offer_id":55037181657415,"sku":"E3D-RC-NOZZLE-HF-HTA-0800-AS-SPK","price":82.95,"currency_code":"EUR","in_stock":true},{"title":"1.0 mm","offer_id":55037181690183,"sku":"E3D-RC-NOZZLE-HF-HTA-1000-AS-SPK","price":82.95,"currency_code":"EUR","in_stock":true},{"title":"1.2 mm","offer_id":55037181722951,"sku":"E3D-RC-NOZZLE-HF-HTA-1200-AS-SPK","price":82.95,"currency_code":"EUR","in_stock":true},{"title":"1.4 mm","offer_id":55037181755719,"sku":"E3D-RC-NOZZLE-HF-HTA-1400-AS-SPK","price":82.95,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0878\/0575\/5719\/files\/e3d-revo-high-flow-hta-nozzle-04-to-14-mm-5060761.png?v=1789516643"},{"product_id":"e3d-revo-high-temperature-nozzle","title":"E3D Revo High Temperature Nozzle — Copper, 0.4 to 0.8 mm","description":"\u003cp\u003eA copper Revo nozzle with a copper spreader for the best possible heat transfer, finished in chromium nitride for corrosion resistance and a non-stick surface. Rated to 500 °C — this is the nozzle for engineering polymers like PEEK and PEI, where the temperature is the problem rather than the filler.\u003c\/p\u003e\n\u003cp\u003eCopper moves heat better than brass or steel, which is what lets it hold temperature at the tip when you are running near the top of the range.\u003c\/p\u003e\n\u003ch3\u003eRead this before you buy\u003c\/h3\u003e\n\u003cp\u003eThe 500 °C is the nozzle's rating, not your printer's. On a 40 W or 60 W HeaterCore you are limited to 300 °C, and you need a Revo High Temperature hotside to go higher. If you are buying this for PEEK, budget for the hotside too.\u003c\/p\u003e\n\u003ch3\u003eFits\u003c\/h3\u003e\n\u003cp\u003eEvery Revo coldside. 1.75 mm filament. Nozzle and heatbreak in one factory-assembled part — no hot-tightening, no leaks, swapped cold by hand. Not compatible with V6-style heater blocks.\u003c\/p\u003e\n\u003ch3\u003ePrinting abrasives too?\u003c\/h3\u003e\n\u003cp\u003eThen this is the wrong one — bare copper wears fast on filled filament. Take the \u003ca href=\"\/products\/e3d-revo-hta-nozzle\"\u003eHTA\u003c\/a\u003e, which is the same temperature rating with a hardened steel tip.\u003c\/p\u003e\n\u003cp\u003eGrey, with the size engraved. E3D part numbers RC-NOZZLE-HT-AS-0400 to -0800-SPK.\u003c\/p\u003e","brand":"E3D","offers":[{"title":"0.4 mm","offer_id":55037182083399,"sku":"E3D-RC-NOZZLE-HT-AS-0400-SPK","price":56.95,"currency_code":"EUR","in_stock":true},{"title":"0.6 mm","offer_id":55037182116167,"sku":"E3D-RC-NOZZLE-HT-AS-0600-SPK","price":56.95,"currency_code":"EUR","in_stock":true},{"title":"0.8 mm","offer_id":55037182148935,"sku":"E3D-RC-NOZZLE-HT-AS-0800-SPK","price":56.95,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0878\/0575\/5719\/files\/e3d-revo-high-temperature-nozzle-copper-04-to-08-mm-1179882.png?v=1789516633"}],"url":"https:\/\/pjotr3dshop.com\/collections\/hotends-extruders.oembed","provider":"Pjotr3DShop","version":"1.0","type":"link"}