{"title":"Tröndle Embedded Systems (TES)","description":"\u003cp\u003eOpen-source Klipper boards from Tröndle Embedded Systems (TES) in Switzerland: the MicroFlip, Compensator buffer, Turtle Neck 2 Remastered and Hydra multi-hotend board. Shipped from the Netherlands, VAT included, no import fees.\u003c\/p\u003e","products":[{"product_id":"tes-microflip-n20-motor-reverser-pcb-for-goose-belt-purger","title":"TES MicroFlip N20 Motor Reverser PCB for Goose Belt Purger","description":"\u003cp\u003eA thumb-sized board that goes between your controller and the N20 motor on a Goose Belt Purger. The protection parts the GBP docs ask for are already on the board, so you don't have to solder a diode, resistor and capacitor onto the motor leads. Belt running the wrong way? Flip the slide switch instead of re-crimping the wires.\u003c\/p\u003e\n\u003ch3\u003eSpecs\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eFor N20-size brushed DC gear motors, 3–12 V, up to 1 A\u003c\/li\u003e\n\u003cli\u003eDPDT slide switch that swaps both motor leads\u003c\/li\u003e\n\u003cli\u003eRC snubber on board against brush noise and voltage spikes\u003c\/li\u003e\n\u003cli\u003e2-pin JST-PH connector\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eIn the bag\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eMicroFlip PCB\u003c\/li\u003e\n\u003cli\u003e1× 2-pin JST-PH housing with 4 crimp pins (you need 2, the other 2 are spares)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eGood to know\u003c\/h3\u003e\n\u003cp\u003eThe board is rated for 12 V. If your fan outputs run at 24 V, take the motor power from a 12 V or 5 V output instead.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIn stock in the Netherlands.\u003c\/strong\u003e It ships from my workshop within 2–4 working days, no import fees or customs on top.\u003c\/p\u003e\n\u003cp\u003eDesigned by Tröndle Embedded Systems (TES) in Switzerland, open source under GPL-3.0.\u003c\/p\u003e","brand":"Tröndle Embedded Systems","offers":[{"title":"Default Title","offer_id":55059882967367,"sku":"TES-MICROFLIP","price":3.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0878\/0575\/5719\/files\/tes-microflip-n20-motor-reverser-pcb-for-goose-belt-purger-9589890.jpg?v=1791836723"},{"product_id":"pulsar-hydra","title":"Pulsar Hydra Multi-Hotend Control Board for Hotend Changers","description":"\u003cp\u003eOne board for a multi-hotend build. Hydra is a Klipper control board for hotend changers: instead of wiring a separate toolhead board for every hotend, one Hydra runs all of them.\u003c\/p\u003e\u003ch3\u003eWhat's on the board\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eUp to 8 hotends\u003c\/li\u003e\n\u003cli\u003eUp to 9 fan sets\u003c\/li\u003e\n\u003cli\u003eUp to 8 addressable LED chains\u003c\/li\u003e\n\u003cli\u003eCAN or USB to your host\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eGood to know\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eMade for hotend-changing builds, where one carriage swaps between hotends.\u003c\/li\u003e\n\u003cli\u003eAssembled in the USA by Pulsar3D.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003ePre-order.\u003c\/strong\u003e I'm bringing this board in from Pulsar3D in the US. They're waiting on their own batch, so I can't give a ship date yet. As soon as it lands in the Netherlands it goes out to you, and you pay no import fees or customs on top.\u003c\/p\u003e\u003cp\u003eDesigned by Tröndle Embedded Systems (TES). Product page: \u003ca href=\"https:\/\/pulsar-3d.com\/products\/hydra\" target=\"_blank\" rel=\"noopener\"\u003epulsar-3d.com\/products\/hydra\u003c\/a\u003e\u003c\/p\u003e","brand":"Tröndle Embedded Systems","offers":[{"title":"Default Title","offer_id":55270372507975,"sku":"TES-HYDRA","price":79.95,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0878\/0575\/5719\/files\/tes-hydra-multi-hotend-control-board-for-hotend-changers-canusb-pre-order-5111751.jpg?v=1794653951"},{"product_id":"tes-turtle-neck-2-remastered-filament-buffer-with-onboard-klipper-mcu-pre-order","title":"TES Turtle Neck 2 Remastered Filament Buffer with Onboard Klipper MCU (Pre-Order)","description":"\u003cp\u003eThe Turtle Neck 2, redone. Same footprint and mounting as the original TN2, but the electronics are completely redesigned: the Klipper MCU now sits on the buffer itself, so the wiring to your filament changer or autoloader gets a lot cleaner. The buffer position comes from a Compensator linear Hall sensor array instead of switches, which gives AFC a true linear position with known endpoints, no calibration needed.\u003c\/p\u003e\u003ch3\u003eWhat's on the board\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eOnboard Klipper MCU, USB by default, optional 24 V power and CAN bus\u003c\/li\u003e\n\u003cli\u003eBuilt-in Compensator linear buffer with dual raw Hall signals\u003c\/li\u003e\n\u003cli\u003eRuns up to 6 Compensator buffers from this one MCU\u003c\/li\u003e\n\u003cli\u003e5 extra ADC\/endstop-capable inputs\u003c\/li\u003e\n\u003cli\u003eNeoPixel\/RGB addressable LED output\u003c\/li\u003e\n\u003cli\u003eModular inlet for buffer-mounted filament hubs\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eIn the bag\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e1× TN2R PCB\u003c\/li\u003e\n\u003cli\u003e1× 6×3 mm N52 magnet\u003c\/li\u003e\n\u003cli\u003e2× ECAS04 bowden collets\u003c\/li\u003e\n\u003cli\u003e1× 0.8×12×30 mm compression spring\u003c\/li\u003e\n\u003cli\u003e4× M3×5×4 heat-set inserts, 4× M3×8 SHCS, 2× M3×10 FHCS, 1× M2.5×10 FHCS\u003c\/li\u003e\n\u003cli\u003e4× adhesive felt pieces\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eGood to know\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ePrinted parts are not included.\u003c\/li\u003e\n\u003cli\u003eThis is a limited Remastered run, not a permanently stocked item.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003ePre-order.\u003c\/strong\u003e I'm bringing this in from Pulsar3D in the US. They're waiting on their own batch, so I can't give a ship date yet. As soon as it lands in the Netherlands it goes out to you, and you pay no import fees or customs on top.\u003c\/p\u003e\u003cp\u003eDesigned by NEI and Tröndle Embedded Systems (TES). Assembly manual: \u003ca href=\"https:\/\/embeds.daedum.com\/manual.html?manual=9c00071b-3bf3-4d16-b1be-1044af001a48\" target=\"_blank\" rel=\"noopener\"\u003eTN2 Remastered manual\u003c\/a\u003e\u003c\/p\u003e","brand":"Tröndle Embedded Systems","offers":[{"title":"Default Title","offer_id":55270382240071,"sku":"TES-TN2R","price":54.95,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0878\/0575\/5719\/files\/tes-turtle-neck-2-remastered-filament-buffer-with-onboard-klipper-mcu-pre-order-3187142.png?v=1794653956"},{"product_id":"tes-compensator-linear-filament-buffer-pcb-hall-sensor-pre-order","title":"TES Compensator Linear Filament Buffer PCB, Hall Sensor (Pre-Order)","description":"\u003cp\u003eA filament buffer that knows where it is. Instead of an endstop that only tells you \"full\" or \"empty\", the Compensator reads the buffer position continuously with two linear Hall sensors and a single moving magnet. Your controller gets a true analog position on an ADC input: centre and both travel limits are known, so filament-management systems like AFC can run closed-loop without calibration.\u003c\/p\u003e\u003ch3\u003eWhat it does\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDual linear Hall-effect sensing, contactless, no mechanical switches\u003c\/li\u003e\n\u003cli\u003eContinuous analog buffer-position output, plus the two raw Hall signals\u003c\/li\u003e\n\u003cli\u003eTells the difference between normal filament movement, the buffer filling or emptying, centre and the travel limits\u003c\/li\u003e\n\u003cli\u003eFor multi-colour systems, filament feeders, autoloaders and toolchangers\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eGood to know\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ePCB only. Printed parts are not included.\u003c\/li\u003e\n\u003cli\u003eThe Turtle Neck 2 Remastered has this buffer built in and runs up to 6 of these from its MCU.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003ePre-order.\u003c\/strong\u003e I'm bringing these in from Pulsar3D in the US. They're waiting on their own batch, so I can't give a ship date yet. As soon as they land in the Netherlands they go out to you, and you pay no import fees or customs on top.\u003c\/p\u003e\u003cp\u003eDesigned by Tröndle Embedded Systems (TES). Product page: \u003ca href=\"https:\/\/pulsar-3d.com\/products\/compensator-linear-buffer-pcb\" target=\"_blank\" rel=\"noopener\"\u003epulsar-3d.com\u003c\/a\u003e\u003c\/p\u003e","brand":"Tröndle Embedded Systems","offers":[{"title":"Single","offer_id":55270397116743,"sku":"TES-COMP-1","price":6.95,"currency_code":"EUR","in_stock":true},{"title":"5-pack","offer_id":55270397149511,"sku":"TES-COMP-5","price":29.95,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0878\/0575\/5719\/files\/tes-compensator-linear-filament-buffer-pcb-hall-sensor-pre-order-8419567.jpg?v=1791836718"}],"url":"https:\/\/pjotr3dshop.com\/collections\/tes.oembed","provider":"Pjotr3DShop","version":"1.0","type":"link"}