{"title":"3D Printer Parts","description":"\u003cp\u003eEverything for a 3D printer build or upgrade in one place: the parts I print myself, and the genuine hardware I bring in to go with them.\u003c\/p\u003e\u003cp\u003eThe printed side is made to order in ABS, in your two colours, on my own Voron 2.4. Toolhead kits for the Stealthburner, A4T, Xol, Dragon Burner and Rapid Burner; the bits around them (Voron Tap, Klicky, Galileo 2, Nevermore Micro); full printed-parts sets for the Voron 0.2, Trident, 2.4 and Micron+; and clear PETG LED diffusers. Every kit page has a configurator: pick your printer, hotend, extruder, probe and two colours, and I print exactly that set. Nothing is pre-selected on purpose.\u003c\/p\u003e\u003cp\u003eThe hardware is genuine and bought through the manufacturer's own trade channel: E3D Revo hotends and nozzles, Isik's Tech electronics, Delta fans and Adafruit LEDs, MISUMI extrusions for a frame, and SLM-printed aluminium parts. What's in stock ships within a working day; the rest is ordered in when you buy, so allow about a week.\u003c\/p\u003e\u003cp\u003eThe printed designs are the community's, published under GPLv3 or with the designer's permission; the printing, sorting and packing is mine, in the Netherlands.\u003c\/p\u003e","products":[{"product_id":"a4t-toolhead-led-diffuser-printed-part","title":"A4T Toolhead LED Diffuser — Clear PETG (2-Pack)","description":"\u003cp\u003eThe printed LED diffuser that sits in front of the three NeoPixel LEDs of the A4T toolhead, in clear PETG. It fits the current revision, which is the one I've tested it on.\u003c\/p\u003e\n\u003cp\u003eClear PETG spreads the light instead of leaving you with a few bright dots, and it copes with the heat coming off the hotend better than PLA does.\u003c\/p\u003e\n\u003cp\u003eYou get two pieces. A small print defect in a transparent part is hard to spot until the LEDs are on, so the spare is in the bag on purpose.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMaterial: clear PETG\u003c\/li\u003e\n\u003cli\u003eQuantity: 2 pieces\u003c\/li\u003e\n\u003cli\u003eFits: A4T toolhead, current revision\u003c\/li\u003e\n\u003cli\u003ePrinted to order in the Netherlands\u003c\/li\u003e\n\u003cli\u003eShips within 2 to 4 working days\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eBuilding a complete A4T?\u003c\/h3\u003e\n\u003cp\u003eHow the official A4T BOM maps to what I stock:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePrinted parts:\u003c\/strong\u003e \u003ca href=\"\/products\/a4t-toolhead-printed-parts-kit-abs-two-colours-extruder-parts-included\"\u003eA4T Printed Parts Kit\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eScrews, square nuts, heatsets and standoffs:\u003c\/strong\u003e \u003ca href=\"\/products\/a4t-toolhead-hardware-kit\"\u003eA4T Hardware Kit\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e2510 hotend fan, Delta ASB02505SHA-AY6B 5 V:\u003c\/strong\u003e \u003ca href=\"\/products\/delta-2510-hotend-fan-5v\"\u003eDelta 2510 Hotend Fan\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e3× NeoPixel LED PCB:\u003c\/strong\u003e \u003ca href=\"\/products\/neopixel-rgbw-mini-button-pcb\"\u003eNeoPixel RGBW 3-pack\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLED diffuser:\u003c\/strong\u003e this one\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHotend:\u003c\/strong\u003e \u003ca href=\"\/products\/e3d-revo-voron-coldside\"\u003eE3D Revo Voron Coldside\u003c\/a\u003e with a \u003ca href=\"\/products\/e3d-revo-hotside-kit-24v\"\u003eRevo Hotside Kit\u003c\/a\u003e, or your own Dragon, Rapido or Chube\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOn a Monolith gantry:\u003c\/strong\u003e \u003ca href=\"\/products\/monolith-xol-a4t-slm-belt-clips-aluminium\"\u003eSLM aluminium belt clips\u003c\/a\u003e (pre-order)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eStill to source elsewhere: 2× 4010 blower (GDSTIME 24 V, 12,000 rpm), the extruder gears and motor, and the wire and connectors for the LED harness.\u003c\/p\u003e\n\u003chr\u003e\n\u003cp\u003e\u003cstrong\u003eRelated reading:\u003c\/strong\u003e \u003ca href=\"\/blogs\/blogs\/which-voron-toolhead-printed-parts-kit\"\u003eWhich Voron toolhead printed parts kit do you need?\u003c\/a\u003e\u003c\/p\u003e","brand":"Pjotr3DShop","offers":[{"title":"Default Title","offer_id":55000576885063,"sku":"VRN-DIFF-A4T","price":1.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0878\/0575\/5719\/files\/a4t-toolhead-led-diffuser-clear-petg-2-pack-8896856.jpg?v=1789351453"},{"product_id":"stealthburner-led-diffuser-printed-part","title":"Stealthburner Light Diffuser, Clear PETG (2-Pack)","description":"\u003cp\u003eThe Stealthburner Light Diffuser for the Voron Stealthburner, in the version for discrete LEDs. If your build wires individual LEDs rather than using the LED PCB, this is the one you want.\u003c\/p\u003e\n\u003cp\u003ePrinted in clear PETG, so it spreads the light instead of leaving you with a few bright dots, and it copes with the heat coming off the hotend better than PLA does.\u003c\/p\u003e\n\u003cp\u003eYou get two pieces. A small print defect in a transparent part is hard to spot until the LEDs are on, so the spare is in the bag on purpose.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMaterial: clear PETG\u003c\/li\u003e\n\u003cli\u003eQuantity: 2 pieces\u003c\/li\u003e\n\u003cli\u003eFits: Voron Stealthburner, discrete-LED version (not the LED PCB)\u003c\/li\u003e\n\u003cli\u003ePrinted to order in the Netherlands\u003c\/li\u003e\n\u003cli\u003eShips within 2 to 4 working days\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003cp\u003e\u003cstrong\u003eRelated reading:\u003c\/strong\u003e \u003ca href=\"\/blogs\/blogs\/which-voron-toolhead-printed-parts-kit\"\u003eWhich Voron toolhead printed parts kit do you need?\u003c\/a\u003e\u003c\/p\u003e","brand":"Pjotr3DShop","offers":[{"title":"Default Title","offer_id":55000580849991,"sku":"VRN-DIFF-SB","price":1.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0878\/0575\/5719\/files\/stealthburner-light-diffuser-clear-petg-2-pack-4011450.jpg?v=1789351454"},{"product_id":"xol-toolhead-led-diffuser-printed-part","title":"XOL Toolhead LED Diffuser — Clear PETG (2-Pack)","description":"\u003cp\u003eThe LED diffuser for the XOL toolhead, printed in clear PETG. It fits the current revision, which is the one I've tested it on.\u003c\/p\u003e\n\u003cp\u003eClear PETG spreads the light instead of leaving you with a few bright dots, and it copes with the heat coming off the hotend better than PLA does.\u003c\/p\u003e\n\u003cp\u003eYou get two pieces. A small print defect in a transparent part is hard to spot until the LEDs are on, so the spare is in the bag on purpose.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMaterial: clear PETG\u003c\/li\u003e\n\u003cli\u003eQuantity: 2 pieces\u003c\/li\u003e\n\u003cli\u003eFits: XOL toolhead, current revision\u003c\/li\u003e\n\u003cli\u003ePrinted to order in the Netherlands\u003c\/li\u003e\n\u003cli\u003eShips within 2 to 4 working days\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003cp\u003e\u003cstrong\u003eRelated reading:\u003c\/strong\u003e \u003ca href=\"\/blogs\/blogs\/which-voron-toolhead-printed-parts-kit\"\u003eWhich Voron toolhead printed parts kit do you need?\u003c\/a\u003e\u003c\/p\u003e","brand":"Pjotr3DShop","offers":[{"title":"Default Title","offer_id":55000597758279,"sku":"VRN-DIFF-XOL","price":1.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0878\/0575\/5719\/files\/xol-toolhead-led-diffuser-clear-petg-2-pack-1904326.jpg?v=1789351455"},{"product_id":"dragon-burner-toolhead-printed-parts-kit-abs-two-colours","title":"Dragon Burner Toolhead Printed Parts Kit — ABS or PC-PBT-GF","description":"\u003cp\u003eEvery printed part for a Dragon Burner toolhead, in ABS in your two colours, or in PC-PBT-GF in Anthracite Grey. Pick your printer, extruder mount, hotend mount, probe cowl, cowl style and LED carrier above and I print that set to order.\u003c\/p\u003e\n\u003cp\u003eWhat's in the bag: cowl and diffuser, hotend mount, extruder mount, both braces, the LED carrier you chose, and the ADXL mount if you added one. For Voron 2.4 and Trident the kit includes the matching carriage parts.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePC-PBT-GF upgrade:\u003c\/strong\u003e a polycarbonate\/PBT blend reinforced with glass fibre. It is stiffer than ABS and keeps its shape at higher temperatures, which matters for parts close to the hotend and in a hot, enclosed chamber. It comes in Anthracite Grey only, so the colour choices above apply to the ABS kit. The diffuser stays clear either way.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMaterial: Bambu ABS in your two colours, or PC-PBT-GF in Anthracite Grey\u003c\/li\u003e\n\u003cli\u003eFits: Voron 0.2, Micron, Salad Fork, PFA, Voron 2.4 \/ Trident, Switchwire\u003c\/li\u003e\n\u003cli\u003eProbe cowls exist for the Voron 0.2 cowl only, the others are no-probe by design\u003c\/li\u003e\n\u003cli\u003eNot included: fans, hotend, extruder, LEDs, inserts, screws\u003c\/li\u003e\n\u003cli\u003ePrinted to order in the Netherlands\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eDesign: chirpy2605, published under GPLv3 at github.com\/chirpy2605\/voron. I print and pack the parts; the design is theirs.\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0878\/0575\/5719\/files\/made-to-order-explainer_ecda0da5-8e21-4302-af5e-599147e2a0eb.png?v=1790242793\" alt=\"Made to order, in your two colours: pick your options, I print exactly that set, printed parts in 2–4 days\" width=\"2400\" height=\"840\" loading=\"lazy\"\u003e\u003c\/p\u003e\n\u003chr\u003e\n\u003cp\u003e\u003cstrong\u003eRelated reading:\u003c\/strong\u003e \u003ca href=\"\/blogs\/blogs\/which-voron-toolhead-printed-parts-kit\"\u003eWhich Voron toolhead printed parts kit do you need?\u003c\/a\u003e\u003c\/p\u003e","brand":"Pjotr3DShop","offers":[{"title":"ABS, two colours","offer_id":55001625231687,"sku":"VRN-KIT-DB","price":22.95,"currency_code":"EUR","in_stock":true},{"title":"PC-PBT-GF, Anthracite Grey","offer_id":55169727168839,"sku":"VRN-KIT-DB-PCGF","price":49.95,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0878\/0575\/5719\/files\/dragon-burner-toolhead-printed-parts-kit-abs-two-colours-6439752.png?v=1789351449"},{"product_id":"rapid-burner-toolhead-printed-parts-kit-abs-two-colours","title":"Rapid Burner Toolhead Printed Parts Kit — ABS or PC-PBT-GF","description":"\u003cp\u003eEvery printed part for a Rapid Burner toolhead, in ABS in your two colours, or in PC-PBT-GF in Anthracite Grey. Pick the cowl, probe, extruder mount and LED carrier above and I print that set to order.\u003c\/p\u003e\n\u003cp\u003eWhat's in the bag: cowl and diffuser, hotend and extruder mounts, braces, the LED carrier you chose, and the ADXL mount if you added one. Goliath cowls come air- or water-cooled, your choice above.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePC-PBT-GF upgrade:\u003c\/strong\u003e a polycarbonate\/PBT blend reinforced with glass fibre. It is stiffer than ABS and keeps its shape at higher temperatures, which matters for parts close to the hotend and in a hot, enclosed chamber. It comes in Anthracite Grey only, so the colour choices above apply to the ABS kit. The diffuser stays clear either way.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMaterial: Bambu ABS in your two colours, or PC-PBT-GF in Anthracite Grey\u003c\/li\u003e\n\u003cli\u003eFits: Voron 0.2, Micron, PFA, Salad Fork, and the Goliath and V6 Volcano variants\u003c\/li\u003e\n\u003cli\u003eProbe cowls exist for the standard, cat and Goliath cowls\u003c\/li\u003e\n\u003cli\u003eNot included: fans, hotend, extruder, LEDs, inserts, screws\u003c\/li\u003e\n\u003cli\u003ePrinted to order in the Netherlands\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eDesign: chirpy2605, published under GPLv3 at github.com\/chirpy2605\/voron. I print and pack the parts; the design is theirs.\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0878\/0575\/5719\/files\/made-to-order-explainer_ecda0da5-8e21-4302-af5e-599147e2a0eb.png?v=1790242793\" alt=\"Made to order, in your two colours: pick your options, I print exactly that set, printed parts in 2–4 days\" width=\"2400\" height=\"840\" loading=\"lazy\"\u003e\u003c\/p\u003e\n\u003chr\u003e\n\u003cp\u003e\u003cstrong\u003eRelated reading:\u003c\/strong\u003e \u003ca href=\"\/blogs\/blogs\/which-voron-toolhead-printed-parts-kit\"\u003eWhich Voron toolhead printed parts kit do you need?\u003c\/a\u003e\u003c\/p\u003e","brand":"Pjotr3DShop","offers":[{"title":"ABS, two colours","offer_id":55001625395527,"sku":"VRN-KIT-RB","price":22.95,"currency_code":"EUR","in_stock":true},{"title":"PC-PBT-GF, Anthracite Grey","offer_id":55169727791431,"sku":"VRN-KIT-RB-PCGF","price":49.95,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0878\/0575\/5719\/files\/rapid-burner-toolhead-printed-parts-kit-abs-two-colours-8055110.png?v=1789351450"},{"product_id":"klicky-probe-printed-parts-kit-abs","title":"Klicky Probe Printed Parts Kit — ABS","description":"\u003cp\u003eThe printed parts for a Klicky probe, in ABS. Pick your printer, probe type and dock mount above and I print the matching body, dock and mounts.\u003c\/p\u003e\n\u003cp\u003eKlicky, Klicky Long or Longer, KlickyNG, Unklicky and UnklickyNG are all in the list. For KlickyNG you also pick the magnet size, 3 mm or 2.7 mm.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMaterial: Bambu ABS, one colour\u003c\/li\u003e\n\u003cli\u003eFits: Voron 2.4, Trident and 1.8, Voron 0.2, Switchwire\u003c\/li\u003e\n\u003cli\u003eNot included: magnets, microswitch, screws, wire\u003c\/li\u003e\n\u003cli\u003ePrinted to order in the Netherlands\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eDesign: jlas1, published under GPLv3 at github.com\/jlas1\/Klicky-Probe. I print and pack the parts; the design is theirs.\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0878\/0575\/5719\/files\/made-to-order-explainer_ecda0da5-8e21-4302-af5e-599147e2a0eb.png?v=1790242793\" alt=\"Made to order, in your two colours: pick your options, I print exactly that set, printed parts in 2–4 days\" width=\"2400\" height=\"840\" loading=\"lazy\"\u003e\u003c\/p\u003e\n\u003chr\u003e\n\u003cp\u003e\u003cstrong\u003eRelated reading:\u003c\/strong\u003e \u003ca href=\"\/blogs\/blogs\/which-voron-toolhead-printed-parts-kit\"\u003eWhich Voron toolhead printed parts kit do you need?\u003c\/a\u003e\u003c\/p\u003e","brand":"Pjotr3DShop","offers":[{"title":"Default Title","offer_id":55001625952583,"sku":"VRN-KIT-KLICKY","price":11.95,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0878\/0575\/5719\/files\/klicky-probe-printed-parts-kit-abs-5575290.png?v=1789351449"},{"product_id":"galileo-2-extruder-printed-parts-kit-abs-two-colours","title":"Galileo 2 Extruder Printed Parts Kit — ABS, Two Colours","description":"\u003cp\u003eThe printed parts for a Galileo 2 extruder, in ABS, in your two colours. Pick the version above: G2E to replace Clockwork 2 on a Stealthburner, or G2SA standalone in its Sherpa Mini, Orbiter 2 or bowden forms. The Trident Z drive (G2Z) is a separate kit.\u003c\/p\u003e\n\u003cp\u003eWhat's in the bag: front and rear bodies, bearing holder, tensioner arm, knob, cable cover and the chain link you chose; for the G2SA the plates and main body for your mount.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMaterial: Bambu ABS, colours picked above\u003c\/li\u003e\n\u003cli\u003eFits: Stealthburner (G2E), standalone mounts and bowden (G2SA)\u003c\/li\u003e\n\u003cli\u003eNot included: gears, bearings, motor, PTFE coupler, screws\u003c\/li\u003e\n\u003cli\u003ePrinted to order in the Netherlands\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eDesign: JaredC01, published under GPLv3 at github.com\/JaredC01\/Galileo2. I print and pack the parts; the design is theirs.\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0878\/0575\/5719\/files\/made-to-order-explainer_ecda0da5-8e21-4302-af5e-599147e2a0eb.png?v=1790242793\" alt=\"Made to order, in your two colours: pick your options, I print exactly that set, printed parts in 2–4 days\" width=\"2400\" height=\"840\" loading=\"lazy\"\u003e\u003c\/p\u003e\n\u003chr\u003e\n\u003cp\u003e\u003cstrong\u003eRelated reading:\u003c\/strong\u003e \u003ca href=\"\/blogs\/blogs\/which-voron-toolhead-printed-parts-kit\"\u003eWhich Voron toolhead printed parts kit do you need?\u003c\/a\u003e\u003c\/p\u003e","brand":"Pjotr3DShop","offers":[{"title":"Default Title","offer_id":55001626116423,"sku":"VRN-KIT-G2","price":14.95,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0878\/0575\/5719\/files\/galileo-2-extruder-printed-parts-kit-abs-two-colours-9378936.png?v=1789351452"},{"product_id":"nevermore-micro-filter-printed-parts-kit-abs","title":"Nevermore Micro Filter Printed Parts Kit — ABS","description":"\u003cp\u003eThe printed parts for a Nevermore Micro, in ABS. Pick the version above, V6 is current, and the cartridge and fan you run; I print the plenum, lid and cartridge to match.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMaterial: Bambu ABS, one colour\u003c\/li\u003e\n\u003cli\u003eFits: V6 on 2020 or 1515 extrusion and Voron 0; V5 Duo for Voron 0, 2 \/ Trident and 1.8; V4 in both magnet sizes\u003c\/li\u003e\n\u003cli\u003eNot included: fans, carbon, magnets, screws\u003c\/li\u003e\n\u003cli\u003ePrinted to order in the Netherlands\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eDesign: Nevermore3D, published under GPLv3 at github.com\/nevermore3d\/Nevermore_Micro. I print and pack the parts; the design is theirs.\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0878\/0575\/5719\/files\/made-to-order-explainer_ecda0da5-8e21-4302-af5e-599147e2a0eb.png?v=1790242793\" alt=\"Made to order, in your two colours: pick your options, I print exactly that set, printed parts in 2–4 days\" width=\"2400\" height=\"840\" loading=\"lazy\"\u003e\u003c\/p\u003e\n\u003chr\u003e\n\u003cp\u003e\u003cstrong\u003eRelated reading:\u003c\/strong\u003e \u003ca href=\"\/blogs\/blogs\/which-voron-toolhead-printed-parts-kit\"\u003eWhich Voron toolhead printed parts kit do you need?\u003c\/a\u003e\u003c\/p\u003e","brand":"Pjotr3DShop","offers":[{"title":"Default Title","offer_id":55001626476871,"sku":"VRN-KIT-NMICRO","price":19.95,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0878\/0575\/5719\/files\/nevermore-micro-filter-printed-parts-kit-abs-5988286.jpg?v=1789351453"},{"product_id":"voron-0-2-printed-parts-kit-abs-two-colours","title":"Voron 0.2 Printed Parts Kit — ABS, Two Colours","description":"\u003cp\u003eThe full printed parts set for a Voron 0.2, in ABS, in your two colours, toolhead included. Pick the toolhead, hotend mount and whether you run a display above, and I print the set that fits your build.\u003c\/p\u003e\n\u003cp\u003eWhat's in the bag: Mini Stealthburner or the hotend mount you chose, skirts and feet, tophat clips and hinges, panel mounting, electronics parts, the display parts if you kept them, and the accent inserts in the accent colour.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMaterial: Bambu ABS, colours picked above\u003c\/li\u003e\n\u003cli\u003eFits: Voron 0.2 and 0.2 R1\u003c\/li\u003e\n\u003cli\u003eNot included: inserts, screws, magnets, any hardware\u003c\/li\u003e\n\u003cli\u003ePrinted to order in the Netherlands\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eDesign: Voron Design, published under GPLv3 at github.com\/VoronDesign\/Voron-0. I print and pack the parts; the design is theirs.\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0878\/0575\/5719\/files\/made-to-order-explainer_ecda0da5-8e21-4302-af5e-599147e2a0eb.png?v=1790242793\" alt=\"Made to order, in your two colours: pick your options, I print exactly that set, printed parts in 2–4 days\" width=\"2400\" height=\"840\" loading=\"lazy\"\u003e\u003c\/p\u003e\n\u003chr\u003e\n\u003cp\u003e\u003cstrong\u003eRelated reading:\u003c\/strong\u003e \u003ca href=\"\/blogs\/blogs\/which-voron-toolhead-printed-parts-kit\"\u003eWhich Voron toolhead printed parts kit do you need?\u003c\/a\u003e\u003c\/p\u003e","brand":"Pjotr3DShop","offers":[{"title":"Default Title","offer_id":55001629425991,"sku":"VRN-KIT-V02","price":99.95,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0878\/0575\/5719\/files\/voron-02-printed-parts-kit-abs-two-colours-5668190.png?v=1789351453"},{"product_id":"micron-printed-parts-kit-abs-two-colours","title":"Micron+ Printed Parts Kit — ABS, Two Colours","description":"\u003cp\u003eThe full printed parts set for a Micron+, in ABS, in your two colours. Pick your size, controller, Z drive, probe, Z chain, umbilical gland and display above, and I print the set that fits your build.\u003c\/p\u003e\n\u003cp\u003eWhat's in the bag: gantry and XY joints, Z drives and idlers, Z chain parts, skirts and fan grills for your size, display housing if you picked one, electronics mounts, handles, and the bed fans and filter parts if you kept them. Accent parts in the accent colour.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMaterial: Bambu ABS, colours picked above\u003c\/li\u003e\n\u003cli\u003eFits: Micron+ 120 and 180\u003c\/li\u003e\n\u003cli\u003eNot included: the toolhead, inserts, screws, any hardware\u003c\/li\u003e\n\u003cli\u003ePrinted to order in the Netherlands\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eDesign: Printers For Ants, published under GPLv3 at github.com\/PrintersForAnts\/Micron. I print and pack the parts; the design is theirs.\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0878\/0575\/5719\/files\/made-to-order-explainer_ecda0da5-8e21-4302-af5e-599147e2a0eb.png?v=1790242793\" alt=\"Made to order, in your two colours: pick your options, I print exactly that set, printed parts in 2–4 days\" width=\"2400\" height=\"840\" loading=\"lazy\"\u003e\u003c\/p\u003e\n\u003chr\u003e\n\u003cp\u003e\u003cstrong\u003eRelated reading:\u003c\/strong\u003e \u003ca href=\"\/blogs\/blogs\/which-voron-toolhead-printed-parts-kit\"\u003eWhich Voron toolhead printed parts kit do you need?\u003c\/a\u003e\u003c\/p\u003e","brand":"Pjotr3DShop","offers":[{"title":"Default Title","offer_id":55001629557063,"sku":"VRN-KIT-MICRON","price":159.95,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0878\/0575\/5719\/files\/micron-printed-parts-kit-abs-two-colours-5522983.png?v=1789351452"},{"product_id":"stealthburner-toolhead-printed-parts-kit-abs-two-colours","title":"Stealthburner Toolhead Printed Parts Kit — ABS or PC-PBT-GF","description":"\u003cp\u003eEvery printed part for a Voron Stealthburner, printed to order on my own Voron 2.4 in ABS in your two colours, or in PC-PBT-GF in Anthracite Grey. Pick your printer, printhead, extruder, chain anchor and toolhead PCB above and I print exactly that set. Nothing is pre-selected on purpose.\u003c\/p\u003e\n\u003cp\u003eWhat's in the bag: main body, the front and rear printhead for your hotend, Clockwork 2 (or the bowden parts), LED carrier and clear diffuser, cable door, chain anchor, and the ADXL mount if you picked one. In the ABS kit, accent parts come in the accent colour, as the Voron colour guide intends.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePC-PBT-GF upgrade:\u003c\/strong\u003e a polycarbonate\/PBT blend reinforced with glass fibre. It is stiffer than ABS and keeps its shape at higher temperatures, which matters for parts close to the hotend and in a hot, enclosed chamber. It comes in Anthracite Grey only, so the colour choices above apply to the ABS kit. The LED diffuser stays clear either way.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMaterial: Bambu ABS in your two colours, or PC-PBT-GF in Anthracite Grey\u003c\/li\u003e\n\u003cli\u003eFits: Voron 2.4, Trident and Switchwire, current Stealthburner release\u003c\/li\u003e\n\u003cli\u003eNot included: fans, hotend, extruder gears and motor, LEDs, heat-set inserts, screws\u003c\/li\u003e\n\u003cli\u003ePrinted to order in the Netherlands\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eDesign: Voron Design, published under GPLv3 at github.com\/VoronDesign\/Voron-Stealthburner. I print and pack the parts; the design is theirs.\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0878\/0575\/5719\/files\/made-to-order-explainer_ecda0da5-8e21-4302-af5e-599147e2a0eb.png?v=1790242793\" alt=\"Made to order, in your two colours: pick your options, I print exactly that set, printed parts in 2–4 days\" width=\"2400\" height=\"840\" loading=\"lazy\"\u003e\u003c\/p\u003e\n\u003chr\u003e\n\u003cp\u003e\u003cstrong\u003eRelated reading:\u003c\/strong\u003e \u003ca href=\"\/blogs\/blogs\/which-voron-toolhead-printed-parts-kit\"\u003eWhich Voron toolhead printed parts kit do you need?\u003c\/a\u003e\u003c\/p\u003e","brand":"Pjotr3DShop","offers":[{"title":"ABS, two colours","offer_id":55001630572871,"sku":"VRN-KIT-SB","price":27.95,"currency_code":"EUR","in_stock":true},{"title":"PC-PBT-GF, Anthracite Grey","offer_id":55169726611783,"sku":"VRN-KIT-SB-PCGF","price":49.95,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0878\/0575\/5719\/files\/stealthburner-toolhead-printed-parts-kit-abs-two-colours-9252913.jpg?v=1789351452"},{"product_id":"voron-tap-printed-parts-kit-abs-r8","title":"Voron Tap Printed Parts Kit — ABS, R8","description":"\u003cp\u003eThe printed parts for Voron Tap, release 8, in ABS. Pick your sensor above (OptoTap PCB, wired, or the D2HW microswitch) and I print the matching upper part with the rest of the set.\u003c\/p\u003e\n\u003cp\u003eWhat's in the bag: Tap front, centre, upper for your sensor, and both belt covers. Small kit, pairs with my Stealthburner kit.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMaterial: Bambu ABS, colours picked above\u003c\/li\u003e\n\u003cli\u003eFits: Voron 2.4 and Trident with the Tap carriage hardware\u003c\/li\u003e\n\u003cli\u003eNot included: rail, magnets, sensor, screws\u003c\/li\u003e\n\u003cli\u003ePrinted to order in the Netherlands\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eDesign: Voron Design, published under GPLv3 at github.com\/VoronDesign\/Voron-Tap. I print and pack the parts; the design is theirs.\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0878\/0575\/5719\/files\/made-to-order-explainer_ecda0da5-8e21-4302-af5e-599147e2a0eb.png?v=1790242793\" alt=\"Made to order, in your two colours: pick your options, I print exactly that set, printed parts in 2–4 days\" width=\"2400\" height=\"840\" loading=\"lazy\"\u003e\u003c\/p\u003e\n\u003chr\u003e\n\u003cp\u003e\u003cstrong\u003eRelated reading:\u003c\/strong\u003e \u003ca href=\"\/blogs\/blogs\/which-voron-toolhead-printed-parts-kit\"\u003eWhich Voron toolhead printed parts kit do you need?\u003c\/a\u003e\u003c\/p\u003e","brand":"Pjotr3DShop","offers":[{"title":"Default Title","offer_id":55001631949127,"sku":"VRN-KIT-TAP","price":14.95,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0878\/0575\/5719\/files\/voron-tap-printed-parts-kit-abs-r8-5934354.png?v=1789351449"},{"product_id":"galileo-2-z-drive-printed-parts-kit-abs-two-colours-trident","title":"Galileo 2 Z Drive Printed Parts Kit — ABS, Two Colours (Trident)","description":"\u003cp\u003eThe printed parts for a Galileo 2 Z drive on a Voron Trident, in ABS, in your two colours. Pick G2Z or G2ZXL, your printer size and the display housing above, and I print the full set to order.\u003c\/p\u003e\n\u003cp\u003eWhat's in the bag: corner baseplates and corners, stepper mounts and plates, foot bushings, the front, rear and side skirts for your size with fan grills and keystone inserts, the power inlet you chose, and the Mini 12864 housing if you kept a display.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMaterial: Bambu ABS, colours picked above\u003c\/li\u003e\n\u003cli\u003eFits: Voron Trident 250, 300 and 350\u003c\/li\u003e\n\u003cli\u003eNot included: motors, bearings, gears, fans, screws\u003c\/li\u003e\n\u003cli\u003ePrinted to order in the Netherlands\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eDesign: JaredC01, published under GPLv3 at github.com\/JaredC01\/Galileo2. I print and pack the parts; the design is theirs.\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0878\/0575\/5719\/files\/made-to-order-explainer_ecda0da5-8e21-4302-af5e-599147e2a0eb.png?v=1790242793\" alt=\"Made to order, in your two colours: pick your options, I print exactly that set, printed parts in 2–4 days\" width=\"2400\" height=\"840\" loading=\"lazy\"\u003e\u003c\/p\u003e\n\u003chr\u003e\n\u003cp\u003e\u003cstrong\u003eRelated reading:\u003c\/strong\u003e \u003ca href=\"\/blogs\/blogs\/which-voron-toolhead-printed-parts-kit\"\u003eWhich Voron toolhead printed parts kit do you need?\u003c\/a\u003e\u003c\/p\u003e","brand":"Pjotr3DShop","offers":[{"title":"Default Title","offer_id":55001809813831,"sku":"VRN-KIT-G2Z","price":44.95,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0878\/0575\/5719\/files\/galileo-2-z-drive-printed-parts-kit-abs-two-colours-trident-7806723.png?v=1789351452"},{"product_id":"a4t-toolhead-printed-parts-kit-abs-two-colours-extruder-parts-included","title":"A4T Printed Parts Kit — ABS or PC-PBT-GF","description":"\u003cp\u003eEvery 3D printed part for the A4T toolhead in one kit: the toolhead body and cowling, the hotend mount, the printed parts of your extruder and the probe mount. The A4T BOM expects you to print these yourself; I print them to order on my own Voron 2.4, configured for your build. ABS in your two colours, or PC-PBT-GF in Anthracite Grey.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCarriage:\u003c\/strong\u003e the A4T sits on an Xol carriage or on Voron Tap. Need the printed Xol carriage too? Tick \u003cem\u003ePrinted Xol carriage parts\u003c\/em\u003e (+€2,00) above, pick your rails and belts, and it comes with the kit in the same material and colours. Leave it off if you already have a carriage or run Tap (Tap parts are a separate kit).\u003c\/p\u003e\n\u003ch3\u003ePick your build\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCarriage:\u003c\/strong\u003e Xol carriage or Voron Tap; printed Xol carriage parts as an add-on, for MGN12H or MGN9H rails and 6 mm or 9 mm belts\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHotend mount:\u003c\/strong\u003e Dragon HF or UHF, Rapido HF or UHF, Revo Voron, Chube Compact, Bambu, NF Crazy or TZ V6 2.0\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eExtruder:\u003c\/strong\u003e WW-BMG, Sherpa Mini, Sherpa Micro, Galileo 2, Orbiter, LGX Lite, VZHex or E3D Roto vitamins\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCrossbow filament cutter:\u003c\/strong\u003e with or without. With the cutter I add the printed Crossbow holder for your extruder (for WW-BMG, the Crossbow version of the main body). The CNC aluminium cutter itself is not included.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProbe:\u003c\/strong\u003e none, Klicky, PCB Klicky, KlickyNG, Beacon (Rev D or Rev H), Euclid or Voron Tap\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003ePC-PBT-GF upgrade:\u003c\/strong\u003e a polycarbonate\/PBT blend reinforced with glass fibre. It is stiffer than ABS and keeps its shape at higher temperatures, which matters for parts close to the hotend and in a hot, enclosed chamber. It comes in Anthracite Grey only, so the colour choices above apply to the ABS kit.\u003c\/p\u003e\n\u003cp\u003eThe A4T is designed by DW-Tas and published under CC BY-NC-SA 4.0 at github.com\/Armchair-Heavy-Industries\/A4T. Sold with the designer's permission, and 10% of every sale goes to him to support the project.\u003c\/p\u003e\n\u003ch3\u003eBuilding a complete A4T?\u003c\/h3\u003e\n\u003cp\u003eHow the official A4T BOM maps to what I stock:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePrinted parts:\u003c\/strong\u003e this kit (tick the add-on for the Xol carriage)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eScrews, square nuts, heatsets and standoffs:\u003c\/strong\u003e \u003ca href=\"\/products\/a4t-toolhead-hardware-kit\"\u003eA4T Hardware Kit\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e2510 hotend fan, Delta ASB02505SHA-AY6B 5 V:\u003c\/strong\u003e \u003ca href=\"\/products\/delta-2510-hotend-fan-5v\"\u003eDelta 2510 Hotend Fan\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e3× NeoPixel LED PCB:\u003c\/strong\u003e \u003ca href=\"\/products\/neopixel-rgbw-mini-button-pcb\"\u003eNeoPixel RGBW 3-pack\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLED diffuser:\u003c\/strong\u003e \u003ca href=\"\/products\/a4t-toolhead-led-diffuser-printed-part\"\u003eA4T LED Diffuser\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHotend:\u003c\/strong\u003e \u003ca href=\"\/products\/e3d-revo-voron-coldside\"\u003eE3D Revo Voron Coldside\u003c\/a\u003e with a \u003ca href=\"\/products\/e3d-revo-hotside-kit-24v\"\u003eRevo Hotside Kit\u003c\/a\u003e, or your own Dragon, Rapido or Chube\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOn a Monolith gantry:\u003c\/strong\u003e \u003ca href=\"\/products\/monolith-xol-a4t-slm-belt-clips-aluminium\"\u003eSLM aluminium belt clips\u003c\/a\u003e (pre-order)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eStill to source elsewhere: 2× 4010 blower (GDSTIME 24 V, 12,000 rpm), the extruder gears and motor, the wire and connectors for the LED harness, and the Crossbow cutter itself if you want one.\u003c\/p\u003e\n\u003chr\u003e\n\u003cp\u003e\u003cstrong\u003eRelated reading:\u003c\/strong\u003e \u003ca href=\"\/blogs\/blogs\/which-voron-toolhead-printed-parts-kit\"\u003eWhich Voron toolhead printed parts kit do you need?\u003c\/a\u003e\u003c\/p\u003e","brand":"Pjotr3DShop","offers":[{"title":"ABS, two colours","offer_id":55004895871303,"sku":"VRN-KIT-A4T","price":29.95,"currency_code":"EUR","in_stock":true},{"title":"PC-PBT-GF, Anthracite Grey","offer_id":55169726054727,"sku":"VRN-KIT-A4T-PCGF","price":49.95,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0878\/0575\/5719\/files\/a4t-toolhead-printed-parts-kit-abs-two-colours-extruder-parts-included-9803925.png?v=1789351454"},{"product_id":"doomcube-corner-extrusion-kit-misumi-4040-black-voron-2-4","title":"DoomCube Corner Extrusion Kit — MISUMI 4040, Black, Voron 2.4","description":"\u003cp\u003eThe four 4040 verticals that turn a Voron 2.4 frame into a DoomCube, ordered from MISUMI to the part numbers in the DoomCube-2 BOM. Pick your size and your corner style and I order the set for you.\u003c\/p\u003e\n\u003cp\u003eDoomCube swaps the 2020 verticals for 4040 so the panels sit off the frame with an air gap for insulation, moves the Z drives to the top and puts the mains electronics at the bottom. This kit is the extrusion part of that: the rest of your 2.4 frame stays as it is.\u003c\/p\u003e\n\u003ch3\u003eThree corner styles, straight from the BOM\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSquare, pre-drilled:\u003c\/strong\u003e MISUMI HFSB5-4040 with the LCP-RCP blind-joint counterbores machined by MISUMI. They replace your four 2020 verticals; no drilling at your bench.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSquare, DIY:\u003c\/strong\u003e the same HFSB5-4040 without machining, the BOM's DIY option. You drill the blind-joint holes yourself and save a fair bit.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRounded:\u003c\/strong\u003e MISUMI HFSR5-404020, the rounded-corner profile your existing 2020 verticals nest into. The 4040s need no machining; the 2020 verticals that nest into them need holes drilled, which you do yourself.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's in the box\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSize\u003c\/th\u003e\n\u003cth\u003eSquare, pre-drilled\u003c\/th\u003e\n\u003cth\u003eSquare, DIY\u003c\/th\u003e\n\u003cth\u003eRounded\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e250\u003c\/td\u003e\n\u003ctd\u003e4× HFSB5-4040-430-LCP-RCP\u003c\/td\u003e\n\u003ctd\u003e4× HFSB5-4040-430\u003c\/td\u003e\n\u003ctd\u003e4× HFSR5-404020-430\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e300\u003c\/td\u003e\n\u003ctd\u003e4× HFSB5-4040-480-LCP-RCP\u003c\/td\u003e\n\u003ctd\u003e4× HFSB5-4040-480\u003c\/td\u003e\n\u003ctd\u003e4× HFSR5-404020-480\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e350\u003c\/td\u003e\n\u003ctd\u003e4× HFSB5-4040-530-LCP-RCP\u003c\/td\u003e\n\u003ctd\u003e4× HFSB5-4040-530\u003c\/td\u003e\n\u003ctd\u003e4× HFSR5-404020-530\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003eBlack anodised. Blind-joint screws are not included. The new Z idlers and relocated endstop mounts DoomCube needs are printed parts from the DoomCube-2 repository.\u003c\/p\u003e\n\u003ch3\u003eLead time and shipping\u003c\/h3\u003e\n\u003cp\u003eMISUMI cuts and machines 4040 to order and quotes about two weeks for it, so count on two to three weeks before your set ships from the Netherlands. Slower than my printed parts, but it is the real part with the real machining. I'll mail you when it is on its way.\u003c\/p\u003e\n\u003cp\u003eFour 4040 bars weigh about 3 kg, so this kit ships as a PostNL parcel charged by weight at checkout; the free-shipping rule for my printed parts does not cover it.\u003c\/p\u003e\n\u003cp\u003eBuilding the doors too? The \u003ca href=\"\/products\/doomcube-door-extrusions-hinges-misumi-hfsb5-2020-black\"\u003eDoomCube Door Extrusions + Hinges kit\u003c\/a\u003e is cut from the same BOM. Need other MISUMI lengths, profiles or parts for your build? Mail me at \u003ca href=\"mailto:pjotr3dshop@gmail.com\"\u003epjotr3dshop@gmail.com\u003c\/a\u003e with the part numbers and I'll quote your order.\u003c\/p\u003e\n\u003chr\u003e\n\u003cp\u003eDesign: DoomCube-2 by FrankenVoron and the Voron community, published under GPLv3 at github.com\/FrankenVoron\/DoomCube-2. Extrusion by MISUMI. I source, check and pack the set; the design is theirs.\u003c\/p\u003e","brand":"MISUMI","offers":[{"title":"250 \/ Square, pre-drilled","offer_id":55004941025607,"sku":"VRN-DC-COR-250-SQ","price":169.95,"currency_code":"EUR","in_stock":true},{"title":"250 \/ Rounded","offer_id":55004941058375,"sku":"VRN-DC-COR-250-RD","price":79.95,"currency_code":"EUR","in_stock":true},{"title":"300 \/ Square, pre-drilled","offer_id":55004941091143,"sku":"VRN-DC-COR-300-SQ","price":179.95,"currency_code":"EUR","in_stock":true},{"title":"300 \/ Rounded","offer_id":55004941123911,"sku":"VRN-DC-COR-300-RD","price":84.95,"currency_code":"EUR","in_stock":true},{"title":"350 \/ Square, pre-drilled","offer_id":55004941156679,"sku":"VRN-DC-COR-350-SQ","price":189.95,"currency_code":"EUR","in_stock":true},{"title":"350 \/ Rounded","offer_id":55004941189447,"sku":"VRN-DC-COR-350-RD","price":89.95,"currency_code":"EUR","in_stock":true},{"title":"250 \/ Square, DIY","offer_id":55014278922567,"sku":"VRN-DC-COR-250-SQP","price":124.95,"currency_code":"EUR","in_stock":true},{"title":"300 \/ Square, DIY","offer_id":55014278955335,"sku":"VRN-DC-COR-300-SQP","price":129.95,"currency_code":"EUR","in_stock":true},{"title":"350 \/ Square, DIY","offer_id":55014278988103,"sku":"VRN-DC-COR-350-SQP","price":134.95,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0878\/0575\/5719\/files\/doomcube-corner-extrusion-kit-misumi-4040-black-voron-24-1952675.png?v=1789351453"},{"product_id":"doomcube-door-extrusions-hinges-misumi-hfsb5-2020-black","title":"DoomCube Door Extrusions + Hinges — MISUMI HFSB5-2020, Black","description":"\u003cp\u003eThe extrusions and hinges for DoomCube's framed front doors, in the BOM's pre-drilled version: two uprights with the blind-joint access holes machined by MISUMI, two rails tapped M5 both ends, plus two MISUMI HHPBSN5 black hinge sets. The frame goes together with four screws and no drilling. Pick your size and I order the set for you.\u003c\/p\u003e\n\u003ch3\u003eWhat's in the box\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSize\u003c\/th\u003e\n\u003cth\u003eUprights, access holes\u003c\/th\u003e\n\u003cth\u003eRails, tapped both ends\u003c\/th\u003e\n\u003cth\u003eHinges\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e250\u003c\/td\u003e\n\u003ctd\u003e2× HFSB5-2020-430-AH10-BH420\u003c\/td\u003e\n\u003ctd\u003e2× HFSB5-2020-328-TPW\u003c\/td\u003e\n\u003ctd\u003e2× HHPBSN5-SET\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e300\u003c\/td\u003e\n\u003ctd\u003e2× HFSB5-2020-480-AH10-BH470\u003c\/td\u003e\n\u003ctd\u003e2× HFSB5-2020-378-TPW\u003c\/td\u003e\n\u003ctd\u003e2× HHPBSN5-SET\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e350\u003c\/td\u003e\n\u003ctd\u003e2× HFSB5-2020-530-AH10-BH520\u003c\/td\u003e\n\u003ctd\u003e2× HFSB5-2020-428-TPW\u003c\/td\u003e\n\u003ctd\u003e2× HHPBSN5-SET\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003eBlack anodised extrusion. Door panels, corner brackets and the four blind-joint screws are not included; the panel DXFs are in the DoomCube-2 repository. Only need hinges? They are sold on their own as the \u003ca href=\"\/products\/misumi-hhpbsn5-door-hinge-set-for-2020-extrusion-doors\"\u003eMISUMI HHPBSN5 Door Hinge Set\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch3\u003eLead time and shipping\u003c\/h3\u003e\n\u003cp\u003eMISUMI cuts and machines each set to order, so count on about two weeks before it ships from the Netherlands, longer than my printed parts. I'll mail you when it is on its way.\u003c\/p\u003e\n\u003cp\u003eThe set weighs a little over a kilo and ships as a PostNL parcel charged by weight at checkout; the free-shipping rule for my printed parts does not cover extrusion.\u003c\/p\u003e\n\u003cp\u003eNeed other MISUMI lengths, profiles or parts for your build? Mail me at \u003ca href=\"mailto:pjotr3dshop@gmail.com\"\u003epjotr3dshop@gmail.com\u003c\/a\u003e with the part numbers and I'll quote your order.\u003c\/p\u003e\n\u003chr\u003e\n\u003cp\u003eDesign: DoomCube-2 by FrankenVoron and the Voron community, published under GPLv3 at github.com\/FrankenVoron\/DoomCube-2. Extrusion and hinges by MISUMI. I source, check and pack the set; the design is theirs.\u003c\/p\u003e","brand":"MISUMI","offers":[{"title":"250","offer_id":55004941451591,"sku":"VRN-DC-DOOR-250","price":74.95,"currency_code":"EUR","in_stock":true},{"title":"300","offer_id":55004941484359,"sku":"VRN-DC-DOOR-300","price":79.95,"currency_code":"EUR","in_stock":true},{"title":"350","offer_id":55004941517127,"sku":"VRN-DC-DOOR-350","price":84.95,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0878\/0575\/5719\/files\/doomcube-door-extrusions-hinges-misumi-hfsb5-2020-black-1325609.png?v=1789351451"},{"product_id":"misumi-hhpbsn5-door-hinge-set-for-2020-extrusion-doors","title":"MISUMI HHPBSN5 Door Hinge Set — for 2020 Extrusion Doors","description":"\u003cp\u003eThe MISUMI hinge the DoomCube-2 BOM specifies for its framed doors: one HHPBSN5-SET in black, or HHPSN5-SET in silver. A set is one flat hinge with conical countersinks, demountable, with a POM bush, for 20 mm T-slot extrusion. A DoomCube door takes two sets; order the quantity you need.\u003c\/p\u003e\n\u003cp\u003eIt fits any 2020 extrusion door, not just DoomCube: a Voron 2.4 or Trident with a framed front door, an enclosure you built yourself. Same part, straight from MISUMI, no substitutes.\u003c\/p\u003e\n\u003ch3\u003eLead time and shipping\u003c\/h3\u003e\n\u003cp\u003eOrdered from MISUMI per sale, so count on about two weeks before it ships from the Netherlands. I'll mail you when it is on its way. Shipping is charged at checkout; add the hinges to a kit order and they travel in the same parcel.\u003c\/p\u003e\n\u003cp\u003eNeed the door extrusions too? The \u003ca href=\"\/products\/doomcube-door-extrusions-hinges-misumi-hfsb5-2020-black\"\u003eDoomCube Door Extrusions + Hinges kit\u003c\/a\u003e has both. Need other MISUMI parts, lengths or profiles? Mail me at \u003ca href=\"mailto:pjotr3dshop@gmail.com\"\u003epjotr3dshop@gmail.com\u003c\/a\u003e with the part numbers and I'll quote your order.\u003c\/p\u003e","brand":"MISUMI","offers":[{"title":"Black","offer_id":55004969271623,"sku":"MIS-HHPBSN5","price":14.95,"currency_code":"EUR","in_stock":true},{"title":"Silver","offer_id":55004969304391,"sku":"MIS-HHPSN5","price":14.95,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0878\/0575\/5719\/files\/misumi-hhpbsn5-door-hinge-set-for-2020-extrusion-doors-9561284.png?v=1789351453"},{"product_id":"xol-toolhead-printed-parts-kit-abs-two-colours","title":"Xol Toolhead Printed Parts Kit — ABS or PC-PBT-GF","description":"\u003cp\u003eEvery printed part for the Xol toolhead, printed to order on my own Voron 2.4 in ABS in your two colours, or in PC-PBT-GF in Anthracite Grey. Pick your carriage, hotend mount, part cooling, extruder mount and probe module above and I print exactly that set.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCarriage:\u003c\/strong\u003e need the printed Xol carriage too? Tick \u003cem\u003ePrinted Xol carriage parts\u003c\/em\u003e (+€2,00) above, pick your rails and belts, and it comes with the kit in the same material and colours. Leave it off if you already have a carriage or run Voron Tap (Tap parts are a separate kit).\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePC-PBT-GF upgrade:\u003c\/strong\u003e a polycarbonate\/PBT blend reinforced with glass fibre. It is stiffer than ABS and keeps its shape at higher temperatures, which matters for parts close to the hotend and in a hot, enclosed chamber. It comes in Anthracite Grey only, so the colour choices above apply to the ABS kit.\u003c\/p\u003e\n\u003cp\u003eThe Xol is DW-Tas's lighter sibling of the A4T (Armchair Heavy Industries): a compact toolhead with the XolPAP ducts or a plain fan mount, its own carriage for MGN12H or MGN9H rails, and probe modules from Klicky to Beacon and Cartographer. UHF hotends get the longer ducts and modules automatically from your choices.\u003c\/p\u003e\n\u003cp\u003eThe Xol is designed by DW-Tas and published under CC BY-NC-SA 4.0 at github.com\/Armchair-Heavy-Industries\/Xol-Toolhead. Sold with the designer's permission, and 10% of every sale goes to him to support the project.\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0878\/0575\/5719\/files\/made-to-order-explainer_ecda0da5-8e21-4302-af5e-599147e2a0eb.png?v=1790242793\" alt=\"Made to order, in your two colours: pick your options, I print exactly that set, printed parts in 2–4 days\" width=\"2400\" height=\"840\" loading=\"lazy\"\u003e\u003c\/p\u003e\n\u003chr\u003e\n\u003cp\u003e\u003cstrong\u003eRelated reading:\u003c\/strong\u003e \u003ca href=\"\/blogs\/blogs\/which-voron-toolhead-printed-parts-kit\"\u003eWhich Voron toolhead printed parts kit do you need?\u003c\/a\u003e\u003c\/p\u003e","brand":"Pjotr3DShop","offers":[{"title":"ABS, two colours","offer_id":55004988703047,"sku":"VRN-KIT-XOL","price":29.95,"currency_code":"EUR","in_stock":true},{"title":"PC-PBT-GF, Anthracite Grey","offer_id":55169726349639,"sku":"VRN-KIT-XOL-PCGF","price":49.95,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0878\/0575\/5719\/files\/xol-toolhead-printed-parts-kit-abs-two-colours-5642009.png?v=1789351454"},{"product_id":"e3d-revo-voron-coldside","title":"E3D Revo Voron Coldside","description":"\u003cp\u003eThe Revo heatsink E3D developed with the Voron Design team for the Stealthburner: a red anodised sink that bolts rigidly to the toolhead with four M3 bolts and takes any Revo nozzle. Nozzle changes are done cold, by hand, in under a minute, with no tools and no hot tightening.\u003c\/p\u003e\n\u003cp\u003eThis is the coldside only. Pair it with a \u003ca href=\"\/products\/e3d-revo-hotside-kit-24v\"\u003eRevo Hotside Kit\u003c\/a\u003e for the HeaterCore and nozzles and you have a complete hotend: Starter for PLA, PETG and ASA at normal speeds, High Flow if you want to print fast, High Flow X if you also print carbon- or glass-filled filament.\u003c\/p\u003e\n\u003ch3\u003eFits\u003c\/h3\u003e\n\u003cp\u003eVoron 2.4, Trident, Switchwire, V1, V0.1 and Legacy, on the Stealthburner and other Revo-compatible toolheads. About 25 g of sink, 1.75 mm filament, 300 °C max with a standard HeaterCore.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBuilding an A4T?\u003c\/strong\u003e Revo Voron is one of the hotends the A4T supports: pick the Revo Voron hotend mount in the \u003ca href=\"\/products\/a4t-toolhead-printed-parts-kit-abs-two-colours-extruder-parts-included\"\u003eA4T printed parts kit\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch3\u003eWhat's in the box\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e1 × Revo Voron heatsink\u003c\/li\u003e\n\u003cli\u003e1 × heater extension cable\u003c\/li\u003e\n\u003cli\u003e1 × thermistor extension cable\u003c\/li\u003e\n\u003cli\u003e1 × 100 mm PTFE tube\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003ePrinted parts and mounting instructions are on \u003ca href=\"https:\/\/docs.vorondesign.com\/\" rel=\"noopener\"\u003edocs.vorondesign.com\u003c\/a\u003e. You may need to re-set your Z offset after a nozzle change. E3D part number REVO-VORON-COLD.\u003c\/p\u003e","brand":"E3D","offers":[{"title":"Default Title","offer_id":55033780306247,"sku":"E3D-REVO-VORON-COLD","price":43.95,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0878\/0575\/5719\/files\/e3d-revo-voron-coldside-revo-heatsink-for-stealthburner-2418730.png?v=1789516639"},{"product_id":"e3d-revo-hotside-kit-24v","title":"E3D Revo Hotside Kit, 24V — Starter, High Flow or High Flow X","description":"\u003cp\u003eThe heating half of a Revo hotend: a HeaterCore plus nozzles, matched to how you print. Add it to any Revo coldside (Voron, Six, Prusa, Creality, Hemera XS, Roto) and you're done. All three kits are 24 V.\u003c\/p\u003e\n\u003ch3\u003eWhich one?\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eStarter\u003c\/strong\u003e: 40 W HeaterCore and a 0.6 mm brass nozzle, plus a free 0.4 mm brass nozzle. PLA, PETG and ASA at normal speeds.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHigh Flow\u003c\/strong\u003e: 60 W HeaterCore with 0.4 and 0.6 mm High Flow brass nozzles (roughly 70 % more flow than standard Revo), plus a free 0.4 mm brass nozzle and a Fully Loaded sock pack. For printing fast and big.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHigh Flow X\u003c\/strong\u003e: 60 W HeaterCore with 0.4 and 0.6 mm High Flow ObXidian nozzles (E3DLC-coated, about 55 % more flow), plus the same free brass nozzle and sock pack. For carbon- and glass-filled filament at speed.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eEvery Revo nozzle is a factory-assembled nozzle and heatbreak in one, so there is nothing to hot-tighten. 300 °C max. E3D part numbers REVO-HOT-KIT-24V, REVO-HOT-KIT-HF-24V and REVO-HOT-KIT-HF-X-24V.\u003c\/p\u003e\n\u003cp\u003eNo coldside yet? For a Voron, the \u003ca href=\"\/products\/e3d-revo-voron-coldside\"\u003eRevo Voron Coldside\u003c\/a\u003e is the one.\u003c\/p\u003e","brand":"E3D","offers":[{"title":"Starter (40 W)","offer_id":55033788432711,"sku":"E3D-REVO-HOT-KIT-24V","price":58.95,"currency_code":"EUR","in_stock":true},{"title":"High Flow (60 W)","offer_id":55033788465479,"sku":"E3D-REVO-HOT-KIT-HF-24V","price":129.95,"currency_code":"EUR","in_stock":true},{"title":"High Flow X (60 W, ObXidian)","offer_id":55033788498247,"sku":"E3D-REVO-HOT-KIT-HF-X-24V","price":187.95,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0878\/0575\/5719\/files\/e3d-revo-hotside-kit-24v-starter-high-flow-or-high-flow-x-3442739.png?v=1789516636"},{"product_id":"e3d-revo-nozzle-brass","title":"E3D Revo Nozzle, Brass — 0.15 to 0.8 mm","description":"\u003cp\u003eThe standard Revo nozzle: nozzle and heatbreak in one factory-assembled part, so you screw it into any Revo coldside by hand, cold, and print. No tools, no hot tightening, no leaks from a bad assembly. A swap takes under a minute.\u003c\/p\u003e\n\u003cp\u003eSizes 0.15, 0.25, 0.4, 0.6 and 0.8 mm. Each comes with a colour-coded silicone sock and the size engraved on the nozzle, so you can tell them apart in the drawer.\u003c\/p\u003e\n\u003ch3\u003eFits\u003c\/h3\u003e\n\u003cp\u003eEvery Revo coldside: Revo Voron, Six, Micro, CR, Hemera XS, the Prusa MK3 and Mini editions, Roto. Not compatible with V6-style heater blocks. 1.75 mm filament, 300 °C max, 13 mm diameter, 41 mm long.\u003c\/p\u003e\n\u003cp\u003eYou may need to re-set your Z offset after a swap. The 0.15 mm is a specialist nozzle that clogs more easily; read E3D's filament starter settings before you use it. Want more flow in the same shape? See the \u003ca href=\"\/products\/e3d-revo-high-flow-nozzle-brass\"\u003eRevo High Flow nozzle\u003c\/a\u003e. E3D part numbers RC-NOZZLE-0150 to RC-NOZZLE-0800-AS-SPK.\u003c\/p\u003e","brand":"E3D","offers":[{"title":"0.15 mm","offer_id":55033794691399,"sku":"E3D-RC-NOZZLE-0150-AS-SPK","price":26.95,"currency_code":"EUR","in_stock":true},{"title":"0.25 mm","offer_id":55033794724167,"sku":"E3D-RC-NOZZLE-0250-AS-SPK","price":26.95,"currency_code":"EUR","in_stock":true},{"title":"0.4 mm","offer_id":55033794756935,"sku":"E3D-RC-NOZZLE-0400-AS-SPK","price":26.95,"currency_code":"EUR","in_stock":true},{"title":"0.6 mm","offer_id":55033794789703,"sku":"E3D-RC-NOZZLE-0600-AS-SPK","price":26.95,"currency_code":"EUR","in_stock":true},{"title":"0.8 mm","offer_id":55033794822471,"sku":"E3D-RC-NOZZLE-0800-AS-SPK","price":26.95,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0878\/0575\/5719\/files\/e3d-revo-nozzle-brass-015-to-08-mm-2395261.png?v=1789516639"},{"product_id":"e3d-revo-high-flow-nozzle-brass","title":"E3D Revo High Flow Nozzle, Brass — 0.4 to 1.4 mm","description":"\u003cp\u003eSame size and shape as a standard Revo nozzle, so nothing on your toolhead changes, but with E3D's internal high-flow geometry: more surface area, better heat transfer, roughly 70 % more volumetric flow. Screw it in cold, by hand, and print faster or bigger.\u003c\/p\u003e\n\u003cp\u003eSizes 0.4, 0.6, 0.8, 1.0, 1.2 and 1.4 mm. The nozzle is engraved with its size and \"HF\", and the high-flow insert shows as a circle on the tip.\u003c\/p\u003e\n\u003ch3\u003eFits\u003c\/h3\u003e\n\u003cp\u003eRevo Voron, Six, Micro, CR, Hemera XS, Prusa MK3 and Mini editions, Roto, MicroSwiss NG and Biqu H2 V2. 1.75 mm filament, 300 °C max, 24 V. A 40 W HeaterCore works for most materials; for polycarbonate and other hot filaments the 60 W core gets the most out of it. Not compatible with V6-style heater blocks.\u003c\/p\u003e\n\u003cp\u003eYou may need to re-set your Z offset after a swap. E3D's measured flow rates per size and material are in its \u003ca href=\"https:\/\/e3d-online.com\/blogs\/help-centre\/revo-nozzle-maximum-flow-rates\" rel=\"noopener\"\u003eflow rate documentation\u003c\/a\u003e. E3D part numbers RC-NOZZLE-HF-0400 to RC-NOZZLE-HF-1400-AS-SPK.\u003c\/p\u003e","brand":"E3D","offers":[{"title":"0.4 mm","offer_id":55033803440455,"sku":"E3D-RC-NOZZLE-HF-0400-AS-SPK","price":54.95,"currency_code":"EUR","in_stock":true},{"title":"0.6 mm","offer_id":55033803473223,"sku":"E3D-RC-NOZZLE-HF-0600-AS-SPK","price":54.95,"currency_code":"EUR","in_stock":true},{"title":"0.8 mm","offer_id":55033803505991,"sku":"E3D-RC-NOZZLE-HF-0800-AS-SPK","price":54.95,"currency_code":"EUR","in_stock":true},{"title":"1.0 mm","offer_id":55033803538759,"sku":"E3D-RC-NOZZLE-HF-1000-AS-SPK","price":54.95,"currency_code":"EUR","in_stock":true},{"title":"1.2 mm","offer_id":55033803571527,"sku":"E3D-RC-NOZZLE-HF-1200-AS-SPK","price":54.95,"currency_code":"EUR","in_stock":true},{"title":"1.4 mm","offer_id":55033803604295,"sku":"E3D-RC-NOZZLE-HF-1400-AS-SPK","price":54.95,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0878\/0575\/5719\/files\/e3d-revo-high-flow-nozzle-brass-04-to-14-mm-8060027.jpg?v=1789516641"},{"product_id":"e3d-revo-obxidian-nozzle","title":"E3D Revo ObXidian Nozzle — Abrasion-Resistant, 0.25 to 0.8 mm","description":"\u003cp\u003eE3D's hardest Revo nozzle: a tool-steel tip with the E3DLC coating on a copper-alloy body. It shrugs off the carbon- and glass-filled filament that eats brass, and because the body conducts heat like brass you keep your existing slicer profiles. The coating is non-stick too, so less plastic builds up on the nozzle.\u003c\/p\u003e\n\u003cp\u003eSizes 0.25, 0.4, 0.6 and 0.8 mm. Nozzle and heatbreak in one factory-assembled part, swapped cold by hand. Skip the 0.25 mm for fibre-filled filament: the fibres are often larger than the hole.\u003c\/p\u003e\n\u003ch3\u003eFits\u003c\/h3\u003e\n\u003cp\u003eEvery Revo coldside. 1.75 mm filament, 300 °C max. Not compatible with V6-style heater blocks. Filaments with very aggressive fillers (Polymaker Fiberon PA-CF and PA-GF and the like) wear even ObXidian over time; for those, look at High Temp Abrasive or DiamondBack.\u003c\/p\u003e\n\u003cp\u003eNeed flow as well? See the \u003ca href=\"\/products\/e3d-revo-high-flow-obxidian-nozzle\"\u003eRevo High Flow ObXidian nozzle\u003c\/a\u003e. E3D part numbers RC-NOZZLE-OBX-0250 to RC-NOZZLE-OBX-0800-AS-SPK.\u003c\/p\u003e","brand":"E3D","offers":[{"title":"0.25 mm","offer_id":55033809240391,"sku":"E3D-RC-NOZZLE-OBX-0250-AS-SPK","price":70.95,"currency_code":"EUR","in_stock":true},{"title":"0.4 mm","offer_id":55033809273159,"sku":"E3D-RC-NOZZLE-OBX-0400-AS-SPK","price":70.95,"currency_code":"EUR","in_stock":true},{"title":"0.6 mm","offer_id":55033809305927,"sku":"E3D-RC-NOZZLE-OBX-0600-AS-SPK","price":70.95,"currency_code":"EUR","in_stock":true},{"title":"0.8 mm","offer_id":55033809338695,"sku":"E3D-RC-NOZZLE-OBX-0800-AS-SPK","price":70.95,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0878\/0575\/5719\/files\/e3d-revo-obxidian-nozzle-abrasion-resistant-025-to-08-mm-9737533.png?v=1789516642"},{"product_id":"e3d-revo-high-flow-obxidian-nozzle","title":"E3D Revo High Flow ObXidian Nozzle — 0.4 to 1.4 mm","description":"\u003cp\u003eObXidian's wear resistance and E3DLC non-stick coating combined with the Revo high-flow core: abrasive filament, printed fast. Same form factor as every other Revo nozzle, so nothing on the toolhead changes. Screw it in cold, by hand.\u003c\/p\u003e\n\u003cp\u003eSizes 0.4, 0.6, 0.8, 1.0, 1.2 and 1.4 mm. For everyday PLA and PETG the plain \u003ca href=\"\/products\/e3d-revo-high-flow-nozzle-brass\"\u003eHigh Flow brass nozzle\u003c\/a\u003e is the cheaper choice; this one is for carbon and glass fibre.\u003c\/p\u003e\n\u003ch3\u003eFits\u003c\/h3\u003e\n\u003cp\u003eEvery Revo coldside. 1.75 mm filament, 300 °C max, 24 V; a 60 W HeaterCore gets the most out of it. Not compatible with V6-style heater blocks. Filaments with very aggressive fillers still wear it over time.\u003c\/p\u003e\n\u003cp\u003eYou may need to re-set your Z offset after a swap. E3D part numbers RC-NOZZLE-HF-OBX-0400 to RC-NOZZLE-HF-OBX-1400-AS-SPK.\u003c\/p\u003e","brand":"E3D","offers":[{"title":"0.4 mm","offer_id":55033816285511,"sku":"E3D-RC-NOZZLE-HF-OBX-0400-AS-SPK","price":74.95,"currency_code":"EUR","in_stock":true},{"title":"0.6 mm","offer_id":55033816318279,"sku":"E3D-RC-NOZZLE-HF-OBX-0600-AS-SPK","price":74.95,"currency_code":"EUR","in_stock":true},{"title":"0.8 mm","offer_id":55033816351047,"sku":"E3D-RC-NOZZLE-HF-OBX-0800-AS-SPK","price":74.95,"currency_code":"EUR","in_stock":true},{"title":"1.0 mm","offer_id":55033816383815,"sku":"E3D-RC-NOZZLE-HF-OBX-1000-AS-SPK","price":74.95,"currency_code":"EUR","in_stock":true},{"title":"1.2 mm","offer_id":55033816416583,"sku":"E3D-RC-NOZZLE-HF-OBX-1200-AS-SPK","price":74.95,"currency_code":"EUR","in_stock":true},{"title":"1.4 mm","offer_id":55033816449351,"sku":"E3D-RC-NOZZLE-HF-OBX-1400-AS-SPK","price":74.95,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0878\/0575\/5719\/files\/e3d-revo-high-flow-obxidian-nozzle-04-to-14-mm-7777609.png?v=1789516640"},{"product_id":"e3d-revo-pz-probe-voron-coldside","title":"E3D Revo PZ Probe Voron Coldside — Nozzle-Touch Bed Levelling for Stealthburner","description":"\u003cp\u003eA Revo Voron heatsink with a piezo element built in, so the nozzle itself becomes the bed probe. No inductive sensor bolted to the side, no separate probe to align — same form factor as the Revo Voron coldside you already know, and it drops into a Stealthburner.\u003c\/p\u003e\n\u003cp\u003eThe piezo turns the vibration of nozzle touching bed into a signal. You calibrate the Z offset once for the flex in your motion system, and after that you screw in a new nozzle by hand and PZ Probe handles the rest. Probing with the nozzle rather than a sensor nearby also means the mesh is measured where it matters, which shows up in the first layer.\u003c\/p\u003e\n\u003ch3\u003eWeight, and why it matters\u003c\/h3\u003e\n\u003cp\u003e36 g for the heatsink with the piezo integrated — under 40 g including cables. That is lighter than any Stealthburner toolhead plus separate probe combination, which is exactly what you want on a Voron running high accelerations.\u003c\/p\u003e\n\u003ch3\u003eWhat you need\u003c\/h3\u003e\n\u003cp\u003eThe only new part to add to an existing Stealthburner is a flat flex cable. Add a Revo hotside and nozzles and you're printing — see the \u003ca href=\"\/products\/e3d-revo-hotside-kit-24v\"\u003eRevo Hotside Kit\u003c\/a\u003e for the heater and thermistor. Read E3D's technical datasheet before installing; the probe is not meant to be taken apart, and doing so voids the warranty.\u003c\/p\u003e\n\u003ch3\u003eIn the box\u003c\/h3\u003e\n\u003cp\u003eRevo Voron heatsink with integrated piezo, PZ Probe board, extension cables, two M2 board mounting screws, Bowden tubing. 1.75 mm filament, 60 °C maximum ambient. E3D part number PIEZO-VORON-COLD.\u003c\/p\u003e","brand":"E3D","offers":[{"title":"Default Title","offer_id":55037157179719,"sku":"E3D-PIEZO-VORON-COLD","price":86.95,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0878\/0575\/5719\/files\/e3d-revo-pz-probe-voron-coldside-nozzle-touch-bed-levelling-for-stealthburner-9086758.png?v=1789516636"},{"product_id":"e3d-pz-probe-kit","title":"E3D PZ Probe Kit — Piezo Bed Levelling for Any Printer","description":"\u003cp\u003eThe PZ Probe on its own, for builds outside the Revo ecosystem. A piezo washer plus the PZ Board, so you can add contact probing to whatever toolhead you're running.\u003c\/p\u003e\n\u003cp\u003eThe piezo element turns vibration into an electrical signal the moment something makes contact. The board speaks I2C or UART, and you can set it to trigger on either compression or expansion of the element — which is what makes it flexible: use it as a Z probe under the bed or in an extruder mount, as an X or Y endstop, or to measure tool offsets on a toolchanger.\u003c\/p\u003e\n\u003ch3\u003eConfiguring it\u003c\/h3\u003e\n\u003cp\u003eThe PZ Board has five configurations, so you pick the communication method that suits your electronics. Commands let you fine-tune sensitivity and save the result to a preset. E3D's technical datasheet has the full command list — read it before you install.\u003c\/p\u003e\n\u003ch3\u003eIn the box\u003c\/h3\u003e\n\u003cp\u003eOne PZ washer, one PZ Probe board, extension cables and two M2 board mounting screws.\u003c\/p\u003e\n\u003ch3\u003eRunning a Voron with Stealthburner?\u003c\/h3\u003e\n\u003cp\u003eThen the \u003ca href=\"\/products\/e3d-revo-pz-probe-voron-coldside\"\u003eRevo PZ Probe Voron Coldside\u003c\/a\u003e is the easier route — same probe, already built into a Revo heatsink, so the nozzle is the probe and there's nothing to mount. E3D part number PIEZO-WASHER.\u003c\/p\u003e","brand":"E3D","offers":[{"title":"Default Title","offer_id":55037158490439,"sku":"E3D-PIEZO-WASHER","price":50.95,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0878\/0575\/5719\/files\/e3d-pz-probe-kit-piezo-bed-levelling-for-any-printer-9366714.png?v=1789516638"},{"product_id":"e3d-revo-obxidian-500-nozzle","title":"E3D Revo ObXiDian 500 Nozzle — 0.4 to 0.8 mm","description":"\u003cp\u003eE3D's hardest Revo nozzle. ObXiDian 500 is at least five times more wear-resistant than standard ObXidian, and where ObXidian stops at 300 °C this one is rated to 500. Most abrasive filament — carbon fibre, glass fibre, even the UV-reactive glow-in-the-dark stuff that quietly destroys nozzles — simply won't wear it.\u003c\/p\u003e\n\u003cp\u003eThe coating has a low surface energy, so plastic doesn't build up on the tip: easier to clean between prints, and fewer crashes and cosmetic defects from a blob that grew where it shouldn't. Thermal performance is good enough that interlayer adhesion improves too.\u003c\/p\u003e\n\u003ch3\u003eFits\u003c\/h3\u003e\n\u003cp\u003eEvery Revo coldside. 1.75 mm filament. Nozzle and heatbreak in one factory-assembled part — no hot-tightening, no leaks, swapped cold by hand. Not compatible with V6-style heater blocks. Your printer's own maximum still applies: 500 °C is the nozzle's ceiling, not your hotside's.\u003c\/p\u003e\n\u003ch3\u003eObXiDian 500 or ObXidian?\u003c\/h3\u003e\n\u003cp\u003eIf you print abrasives now and then, \u003ca href=\"\/products\/e3d-revo-obxidian-nozzle\"\u003eObXidian\u003c\/a\u003e is plenty and costs less. If that is what your machine runs on, the 500 pays for itself in nozzles you don't replace. Need flow as well? See the \u003ca href=\"\/products\/e3d-revo-high-flow-obxidian-500-nozzle\"\u003eHigh Flow ObXiDian 500\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003eSkip 0.4 mm for heavily filled filament — the fibres are often close to the hole size. E3D part numbers RC-NOZZLE-OBD-AS-0400 to -0800-SPK.\u003c\/p\u003e","brand":"E3D","offers":[{"title":"0.4 mm","offer_id":55037180215623,"sku":"E3D-RC-NOZZLE-OBD-AS-0400-SPK","price":79.95,"currency_code":"EUR","in_stock":true},{"title":"0.6 mm","offer_id":55037180248391,"sku":"E3D-RC-NOZZLE-OBD-AS-0600-SPK","price":79.95,"currency_code":"EUR","in_stock":true},{"title":"0.8 mm","offer_id":55037180281159,"sku":"E3D-RC-NOZZLE-OBD-AS-0800-SPK","price":79.95,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0878\/0575\/5719\/files\/e3d-revo-obxidian-500-nozzle-04-to-08-mm-4387452.png?v=1789516636"},{"product_id":"e3d-revo-high-flow-obxidian-500-nozzle","title":"E3D Revo High Flow ObXiDian 500 Nozzle — 0.4 to 0.8 mm","description":"\u003cp\u003eBoth at once: E3D's hardest nozzle coating and their high-flow geometry. ObXiDian 500 is at least five times more wear-resistant than standard ObXidian and rated to 500 °C, and the four-channel internal insert pushes heat into the filament far better than a plain bore — so you can run abrasive material fast instead of choosing one or the other.\u003c\/p\u003e\n\u003cp\u003eSame form factor as every other Revo nozzle, so nothing on your toolhead changes. The low-surface-energy coating keeps plastic off the tip: less cleaning between prints, fewer crashes.\u003c\/p\u003e\n\u003ch3\u003eFits\u003c\/h3\u003e\n\u003cp\u003eEvery Revo coldside. 1.75 mm filament. Nozzle and heatbreak in one factory-assembled part, swapped cold by hand — no hot-tightening, no leaks. Not compatible with V6-style heater blocks. The 500 °C rating is the nozzle's; your hotside sets the real ceiling.\u003c\/p\u003e\n\u003ch3\u003eWhich one do you need?\u003c\/h3\u003e\n\u003cp\u003eFlow but not the extreme hardness: \u003ca href=\"\/products\/e3d-revo-high-flow-obxidian-nozzle\"\u003eHigh Flow ObXidian\u003c\/a\u003e, cheaper and good to 300 °C. Hardness but no need for speed: \u003ca href=\"\/products\/e3d-revo-obxidian-500-nozzle\"\u003eObXiDian 500\u003c\/a\u003e. Hot and abrasive rather than fast: \u003ca href=\"\/products\/e3d-revo-hta-nozzle\"\u003eHTA\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003eSkip 0.4 mm for heavily filled filament — the fibres are often close to the hole size. E3D part numbers RC-NOZZLE-HF-OBD-AS-0400 to -0800-SPK.\u003c\/p\u003e","brand":"E3D","offers":[{"title":"0.4 mm","offer_id":55037180641607,"sku":"E3D-RC-NOZZLE-HF-OBD-AS-0400-SPK","price":93.95,"currency_code":"EUR","in_stock":true},{"title":"0.6 mm","offer_id":55037180674375,"sku":"E3D-RC-NOZZLE-HF-OBD-AS-0600-SPK","price":93.95,"currency_code":"EUR","in_stock":true},{"title":"0.8 mm","offer_id":55037180707143,"sku":"E3D-RC-NOZZLE-HF-OBD-AS-0800-SPK","price":93.95,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0878\/0575\/5719\/files\/e3d-revo-high-flow-obxidian-500-nozzle-04-to-08-mm-6042143.png?v=1789516642"},{"product_id":"e3d-revo-high-temperature-nozzle","title":"E3D Revo High Temperature Nozzle — Copper, 0.4 to 0.8 mm","description":"\u003cp\u003eA copper Revo nozzle with a copper spreader for the best possible heat transfer, finished in chromium nitride for corrosion resistance and a non-stick surface. Rated to 500 °C — this is the nozzle for engineering polymers like PEEK and PEI, where the temperature is the problem rather than the filler.\u003c\/p\u003e\n\u003cp\u003eCopper moves heat better than brass or steel, which is what lets it hold temperature at the tip when you are running near the top of the range.\u003c\/p\u003e\n\u003ch3\u003eRead this before you buy\u003c\/h3\u003e\n\u003cp\u003eThe 500 °C is the nozzle's rating, not your printer's. On a 40 W or 60 W HeaterCore you are limited to 300 °C, and you need a Revo High Temperature hotside to go higher. If you are buying this for PEEK, budget for the hotside too.\u003c\/p\u003e\n\u003ch3\u003eFits\u003c\/h3\u003e\n\u003cp\u003eEvery Revo coldside. 1.75 mm filament. Nozzle and heatbreak in one factory-assembled part — no hot-tightening, no leaks, swapped cold by hand. Not compatible with V6-style heater blocks.\u003c\/p\u003e\n\u003ch3\u003ePrinting abrasives too?\u003c\/h3\u003e\n\u003cp\u003eThen this is the wrong one — bare copper wears fast on filled filament. Take the \u003ca href=\"\/products\/e3d-revo-hta-nozzle\"\u003eHTA\u003c\/a\u003e, which is the same temperature rating with a hardened steel tip.\u003c\/p\u003e\n\u003cp\u003eGrey, with the size engraved. E3D part numbers RC-NOZZLE-HT-AS-0400 to -0800-SPK.\u003c\/p\u003e","brand":"E3D","offers":[{"title":"0.4 mm","offer_id":55037182083399,"sku":"E3D-RC-NOZZLE-HT-AS-0400-SPK","price":54.95,"currency_code":"EUR","in_stock":true},{"title":"0.6 mm","offer_id":55037182116167,"sku":"E3D-RC-NOZZLE-HT-AS-0600-SPK","price":54.95,"currency_code":"EUR","in_stock":true},{"title":"0.8 mm","offer_id":55037182148935,"sku":"E3D-RC-NOZZLE-HT-AS-0800-SPK","price":54.95,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0878\/0575\/5719\/files\/e3d-revo-high-temperature-nozzle-copper-04-to-08-mm-1179882.png?v=1789516633"},{"product_id":"e3d-revo-silicone-socks","title":"E3D Revo Silicone Socks, 3-Pack — Colour-Coded by Nozzle Size","description":"\u003cp\u003eSilicone socks keep the heat where it belongs and stop molten plastic welding itself to your nozzle. On Revo they do one more thing: E3D gives every nozzle size its own colour, so you can see which nozzle is in the machine without pulling it out or squinting at the engraving.\u003c\/p\u003e\n\u003cp\u003eThe code: pink 0.15, yellow 0.25, red 0.4, blue 0.6, green 0.8, black 1.0, purple 1.2, orange 1.4. There is also a black sock for the HeaterCore, which is a different shape — that one is not a size, it's the other half of the hotend.\u003c\/p\u003e\n\u003cp\u003eThree per pack. They are a consumable: they tear eventually, they get a bit crusty, and a fresh one costs less than the print it saves.\u003c\/p\u003e\n\u003ch3\u003eFits\u003c\/h3\u003e\n\u003cp\u003eEvery Revo nozzle for the tip socks; the HeaterCore sock fits the Revo HeaterCore. Not for V6 or Volcano — different shape.\u003c\/p\u003e\n\u003cp\u003eE3D part numbers RC-SOCK-TIP-*-3PK and RC-SOCK-CORE-BLK-3PK.\u003c\/p\u003e","brand":"E3D","offers":[{"title":"Pink — 0.15 mm","offer_id":55037182542151,"sku":"E3D-RC-SOCK-TIP-PNK-3PK","price":5.95,"currency_code":"EUR","in_stock":true},{"title":"Yellow — 0.25 mm","offer_id":55037182574919,"sku":"E3D-RC-SOCK-TIP-YLW-3PK","price":5.95,"currency_code":"EUR","in_stock":true},{"title":"Red — 0.4 mm","offer_id":55037182607687,"sku":"E3D-RC-SOCK-TIP-RED-3PK","price":5.95,"currency_code":"EUR","in_stock":true},{"title":"Blue — 0.6 mm","offer_id":55037182640455,"sku":"E3D-RC-SOCK-TIP-BLU-3PK","price":5.95,"currency_code":"EUR","in_stock":true},{"title":"Green — 0.8 mm","offer_id":55037182673223,"sku":"E3D-RC-SOCK-TIP-GRN-3PK","price":5.95,"currency_code":"EUR","in_stock":true},{"title":"Black — 1.0 mm","offer_id":55037182705991,"sku":"E3D-RC-SOCK-TIP-BLK-3PK","price":5.95,"currency_code":"EUR","in_stock":true},{"title":"Purple — 1.2 mm","offer_id":55037182738759,"sku":"E3D-RC-SOCK-TIP-PUR-3PK","price":5.95,"currency_code":"EUR","in_stock":true},{"title":"Orange — 1.4 mm","offer_id":55037182771527,"sku":"E3D-RC-SOCK-TIP-ORA-3PK","price":5.95,"currency_code":"EUR","in_stock":true},{"title":"Black — HeaterCore","offer_id":55037182804295,"sku":"E3D-RC-SOCK-CORE-BLK-3PK","price":5.95,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0878\/0575\/5719\/files\/e3d-revo-silicone-socks-3-pack-colour-coded-by-nozzle-size-6907758.jpg?v=1789516652"},{"product_id":"e3d-revo-spring-3-pack","title":"E3D Revo Spring, 3-Pack","description":"\u003cp\u003eThe little spring that sits between the HeaterCore and the nozzle and keeps the two pressed together. It is what makes a Revo swap work without hot-tightening — and it is the part that goes missing on the bench, or gets tired after enough heat cycles.\u003c\/p\u003e\n\u003cp\u003eThree per pack. Keep a set in the drawer; the day you need one you really need one.\u003c\/p\u003e\n\u003ch3\u003eFits\u003c\/h3\u003e\n\u003cp\u003eEvery Revo HeaterCore. E3D part number RC-SPRING-3PACK.\u003c\/p\u003e","brand":"E3D","offers":[{"title":"Default Title","offer_id":55037182935367,"sku":"E3D-RC-SPRING-3PACK","price":3.95,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0878\/0575\/5719\/files\/e3d-revo-spring-3-pack-9083339.jpg?v=1789516636"},{"product_id":"isiks-tech-birds-nest-usb-toolchanger-hub","title":"Isik's Tech Birds' Nest USB Hub for Toolchanger 3D Printers (Pre-Order)","description":"\u003cp\u003eA USB hub for toolchangers that run a USB toolhead board on every tool. One Birds' Nest takes up to six toolheads and gives each one its own protected port, so you run six short cables to a single board instead of six long ones back to the Pi.\u003c\/p\u003e\u003cp\u003eIt runs its own Klipper MCU, so the filament sensors, thermistors and LEDs for each tool connect here too.\u003c\/p\u003e\u003ch3\u003eWhat's on the board\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eSTM32G0B1 MCU running Klipper over USB\u003c\/li\u003e\n\u003cli\u003e6× MX3.0 USB toolhead ports with MOSFET and diode protection\u003c\/li\u003e\n\u003cli\u003e6× 3-pin filament sensor ports, 4× thermistor ports, 2× 5V RGB LED ports\u003c\/li\u003e\n\u003cli\u003eUp to 20 A total to the toolheads\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eGood to know\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eWith 60 W or bigger hotends at 24 V, heat the tools one after another, not all at once.\u003c\/li\u003e\n\u003cli\u003eThe 5V LED outputs are for a few status LEDs, not LED strips.\u003c\/li\u003e\n\u003cli\u003eMX3.0 and XH connectors are included.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003ePre-order.\u003c\/strong\u003e I'm bringing this board in from Isik's Tech in the US. Expected to ship in 3–4 weeks. As soon as it lands in the Netherlands it goes out to you, and you pay no import fees or customs on top.\u003c\/p\u003e\u003cp\u003eDesigned and assembled by Isik's Tech. Docs: \u003ca href=\"https:\/\/docs.isiks.tech\/birds-nest\/usb\/manual\/\" target=\"_blank\" rel=\"noopener\"\u003ehttps:\/\/docs.isiks.tech\/birds-nest\/usb\/manual\/\u003c\/a\u003e\u003c\/p\u003e","brand":"Isik's Tech","offers":[{"title":"Default Title","offer_id":55040788955463,"sku":"BIRDS-NEST","price":65.95,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0878\/0575\/5719\/files\/isiks-tech-birds-nest-usb-hub-for-toolchanger-3d-printers-pre-order-5572158.jpg?v=1791836713"},{"product_id":"isiks-tech-birds-nest-can-toolchanger-hub","title":"Isik's Tech Birds' Nest CAN Hub for Toolchanger 3D Printers (Pre-Order)","description":"\u003cp\u003eThe CAN version of the Birds' Nest, for toolchangers with a CAN toolhead board on each tool. It doubles as your USB-to-CAN bridge and lays the bus out as a proper linear topology, which is the part most home-made CAN hubs get wrong.\u003c\/p\u003e\u003ch3\u003eWhat's on the board\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eSTM32G0B1 MCU running Klipper as USB-to-CAN bridge\u003c\/li\u003e\n\u003cli\u003e6× CAN toolhead ports plus expansion ports for more CAN devices\u003c\/li\u003e\n\u003cli\u003e6× 4-pin filament sensor ports, 6× thermistor ports, 2× 5V ARGB ports\u003c\/li\u003e\n\u003cli\u003eUp to 30 A total to the toolheads\u003c\/li\u003e\n\u003cli\u003e120 Ω termination jumpers, max stub length 300 mm\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eGood to know\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eBuilt for 6-wire umbilicals (two twisted CAN pairs plus power), such as Igus CF113-018-D. A 4-wire mode exists but is less reliable.\u003c\/li\u003e\n\u003cli\u003eMX3.0 and XH connectors are included.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003ePre-order.\u003c\/strong\u003e I'm bringing this board in from Isik's Tech in the US. Expected to ship in 3–4 weeks. As soon as it lands in the Netherlands it goes out to you, and you pay no import fees or customs on top.\u003c\/p\u003e\u003cp\u003eDesigned and assembled by Isik's Tech. Docs: \u003ca href=\"https:\/\/docs.isiks.tech\/birds-nest\/can\/manual\/\" target=\"_blank\" rel=\"noopener\"\u003ehttps:\/\/docs.isiks.tech\/birds-nest\/can\/manual\/\u003c\/a\u003e\u003c\/p\u003e","brand":"Isik's Tech","offers":[{"title":"Default Title","offer_id":55040790757703,"sku":"BN-CAN","price":54.95,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0878\/0575\/5719\/files\/isiks-tech-birds-nest-can-hub-for-toolchanger-3d-printers-pre-order-3458159.jpg?v=1791836712"},{"product_id":"isiks-tech-moar-can-hub","title":"Isik's Tech MOAR_CAN 8\/9 Port CAN Hub, Linear Bus Topology (Pre-Order)","description":"\u003cp\u003eWhen a printer has more CAN devices than your adapter has ports (a toolchanger, an IDEX, a Box Turtle on the same bus), MOAR_CAN gives you the extra ports without turning the bus into a star. It keeps the linear topology that 1 Mbit CAN wants.\u003c\/p\u003e\u003ch3\u003eSpecs\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e6-pin MX3.0 hub ports, plus a 4-pin MX3.0 aux\/power port (10.5 A max)\u003c\/li\u003e\n\u003cli\u003eXH input from your USB\/CAN adapter, power in through a screw terminal\u003c\/li\u003e\n\u003cli\u003e24 A total, 10.5 A max per device, max stub length 300 mm\u003c\/li\u003e\n\u003cli\u003e120 Ω termination jumper\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWorks with\u003c\/h3\u003e\u003cp\u003eToqueCAN, PiCAN and other USB\/CAN adapters. When you use it with a ToqueCAN, leave the MOAR_CAN termination jumper off. Jumpers, MX3.0 and XH connectors and pins are included.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003ePre-order.\u003c\/strong\u003e I'm bringing this board in from Isik's Tech in the US. Expected to ship in 3–4 weeks. As soon as it lands in the Netherlands it goes out to you, and you pay no import fees or customs on top.\u003c\/p\u003e\u003cp\u003eDesigned and assembled by Isik's Tech. Docs: \u003ca href=\"https:\/\/docs.isiks.tech\/moar-can\/manual\/\" target=\"_blank\" rel=\"noopener\"\u003ehttps:\/\/docs.isiks.tech\/moar-can\/manual\/\u003c\/a\u003e\u003c\/p\u003e","brand":"Isik's Tech","offers":[{"title":"Default Title","offer_id":55040790790471,"sku":"MOAR-CAN","price":24.95,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0878\/0575\/5719\/files\/isiks-tech-moar-can-89-port-can-hub-linear-bus-topology-pre-order-7057984.jpg?v=1791836710"},{"product_id":"isiks-tech-toquecan-raspberry-pi-can-usb","title":"Isik's Tech ToqueCAN for Raspberry Pi: 2× CAN, 3-Port USB Hub, 24V to 5V 5A (Pre-Order)","description":"\u003cp\u003eToqueCAN sits on top of a Raspberry Pi 4 or 5 and takes care of the three things every CAN printer build needs around the Pi: a CAN adapter, a USB hub, and a proper 24 V to 5 V supply to power the Pi. That saves you a separate U2C board, a buck converter and a pile of wiring in a small electronics bay.\u003c\/p\u003e\u003ch3\u003eWhat's on the board\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eSTM32F072 MCU with 2× Micro-Fit CAN ports and termination jumpers, runs Klipper (bridge mode recommended) or Candlelight\u003c\/li\u003e\n\u003cli\u003e3-port USB hub (USB2514)\u003c\/li\u003e\n\u003cli\u003e24 V to 5 V 5 A regulator powering the Pi and USB devices, 10 A fuse, 8 A max through the CAN ports\u003c\/li\u003e\n\u003cli\u003eMount for a 30 or 40 mm Pi fan with PWM, fan voltage 5 V or 24 V\u003c\/li\u003e\n\u003cli\u003eNeopixel output, GPIO passthrough, MOAR_CAN expansion connector\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eIn the box\u003c\/h3\u003e\u003cp\u003eToqueCAN PCB, M2.5 standoffs, screws and threaded inserts, JST-XH and MX3.0 connectors, jumpers and a 180° USB adapter. Not included: fan, printed fan mount, USB cable. There's no EEPROM, so the Pi won't detect it as an official HAT. That doesn't affect how it works.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003ePre-order.\u003c\/strong\u003e I'm bringing this board in from Isik's Tech in the US. Expected to ship in 3–4 weeks. As soon as it lands in the Netherlands it goes out to you, and you pay no import fees or customs on top.\u003c\/p\u003e\u003cp\u003eDesigned and assembled by Isik's Tech. Docs: \u003ca href=\"https:\/\/docs.isiks.tech\/toquecan\/manual\/\" target=\"_blank\" rel=\"noopener\"\u003ehttps:\/\/docs.isiks.tech\/toquecan\/manual\/\u003c\/a\u003e\u003c\/p\u003e","brand":"Isik's Tech","offers":[{"title":"Default Title","offer_id":55040790823239,"sku":"TOQUECAN","price":75.95,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0878\/0575\/5719\/files\/isiks-tech-toquecan-for-raspberry-pi-2-can-3-port-usb-hub-24v-to-5v-5a-pre-order-1759516.jpg?v=1791836724"},{"product_id":"isiks-tech-afc-lite-box-turtle-controller","title":"Isik's Tech AFC-Lite Controller PCB for Box Turtle (Pre-Order)","description":"\u003cp\u003eThe controller board made for Armored Turtle's Box Turtle automated filament changer. One board runs all four lanes: steppers for the extruders, brushed DC drivers for the N20 respooler motors, and all the endstops and LEDs.\u003c\/p\u003e\u003ch3\u003eWhat's on the board\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eSTM32H723 MCU, USB-C and CAN (1 Mbit), 24 V in via MX3.0\u003c\/li\u003e\n\u003cli\u003e4× stepstick slots for TMC2209\u003c\/li\u003e\n\u003cli\u003e4× brushed DC motor drivers\u003c\/li\u003e\n\u003cli\u003e12× endstop ports, 4× RGB LED ports, 1× 5 V fan port (always on)\u003c\/li\u003e\n\u003cli\u003eKlipper with Katapult bootloader, works with the AFC Klipper Add-On\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eGood to know\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eStepsticks are not included. SPI stepsticks only run in STEP\/DIR mode.\u003c\/li\u003e\n\u003cli\u003eDon't put a Cartographer v3 probe on the same CAN bus (v4 is fine).\u003c\/li\u003e\n\u003cli\u003eMX3.0 and XH connectors are included.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003ePre-order.\u003c\/strong\u003e I'm bringing this board in from Isik's Tech in the US. Expected to ship in 3–4 weeks. As soon as it lands in the Netherlands it goes out to you, and you pay no import fees or customs on top.\u003c\/p\u003e\u003cp\u003eDesigned and assembled by Isik's Tech. Docs: \u003ca href=\"https:\/\/docs.isiks.tech\/box-turtle\/afc-lite\/manual\/\" target=\"_blank\" rel=\"noopener\"\u003ehttps:\/\/docs.isiks.tech\/box-turtle\/afc-lite\/manual\/\u003c\/a\u003e\u003c\/p\u003e","brand":"Isik's Tech","offers":[{"title":"Default Title","offer_id":55040790856007,"sku":"AFC-Lite","price":79.95,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0878\/0575\/5719\/files\/EC465E98-5802-4287-A348-ED98AF697D6C.jpg?v=1789549510"},{"product_id":"isiks-tech-owlfc-mini-night-owl-controller","title":"Isik's Tech OwlFC-Mini Controller for Night Owl Filament Changer (Pre-Order)","description":"\u003cp\u003eIsik's new controller for the Night Owl automatic filament changer. It's small enough to live inside the unit and runs both extruder steppers, all the switches and the LEDs from one board over CAN or USB.\u003c\/p\u003e\u003ch3\u003eWhat's on the board\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eSTM32G0B1 MCU, CAN and USB with a MUX\u003c\/li\u003e\n\u003cli\u003e2× TMC2209 stepper drivers for the extruders\u003c\/li\u003e\n\u003cli\u003e7× internal and 2× external switch ports\u003c\/li\u003e\n\u003cli\u003eARGB LED output, optional fan port (always on)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eGood to know\u003c\/h3\u003e\u003cp\u003eFor a USB connection you also need the Isik's Tech USB Toolhead Adapter, which I sell separately.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003ePre-order.\u003c\/strong\u003e The OwlFC-Mini is brand new and Isik's first batch ships in late September. Expected to ship from the Netherlands in 3–4 weeks. No import fees or customs on top.\u003c\/p\u003e\u003cp\u003eDesigned and assembled by Isik's Tech.\u003c\/p\u003e","brand":"Isik's Tech","offers":[{"title":"Default Title","offer_id":55040795148615,"sku":"OWLFC-MINI","price":59.95,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0878\/0575\/5719\/files\/isiks-tech-owlfc-mini-controller-for-night-owl-filament-changer-pre-order-5775773.jpg?v=1791836726"},{"product_id":"isiks-tech-nevermore-stealthmax-mini-pcb","title":"Isik's Tech Nevermore Stealthmax \u0026 Mini Controller PCB (V1), CAN\/USB (Pre-Order)","description":"\u003cp\u003eA small Klipper controller for a Nevermore Mini or Stealthmax V1 filter. It gives the filter its own fan control and air-quality readings over CAN or USB, so you don't have to find spare pins on your main board.\u003c\/p\u003e\u003ch3\u003eWhat's on the board\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eSTM32G0B1 MCU, Klipper over CAN or vertical Micro-B USB\u003c\/li\u003e\n\u003cli\u003e1× 4-pin PWM fan output\u003c\/li\u003e\n\u003cli\u003e2× I2C sensor ports, 1× LED port, 1× CAN port\u003c\/li\u003e\n\u003cli\u003eSeparate 12–24 V supply, JST-PH connectors and pins included\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003ePick your version\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eWith BME280 \u0026amp; SGP40 sensors\u003c\/strong\u003e: comes with the sensors, so you get VOC and temperature readings in Klipper straight away.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNo sensors\u003c\/strong\u003e: board only.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eGood to know\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eOnly works with 4-wire PWM fans. 2- and 3-wire fans won't work.\u003c\/li\u003e\n\u003cli\u003eFor Nevermore Mini and Stealthmax V1. Building a Stealthmax V2? Get the Stealthmax PCB 3.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003ePre-order.\u003c\/strong\u003e I'm bringing this board in from Isik's Tech in the US. Expected to ship in 3–4 weeks. As soon as it lands in the Netherlands it goes out to you, and you pay no import fees or customs on top.\u003c\/p\u003e\u003cp\u003eDesigned and assembled by Isik's Tech. Docs: \u003ca href=\"https:\/\/docs.isiks.tech\/nevermore\/controller\/\" target=\"_blank\" rel=\"noopener\"\u003ehttps:\/\/docs.isiks.tech\/nevermore\/controller\/\u003c\/a\u003e\u003c\/p\u003e","brand":"Isik's Tech","offers":[{"title":"With BME280 \u0026 SGP40 sensors","offer_id":55040795181383,"sku":"NM-SM-SENS","price":59.95,"currency_code":"EUR","in_stock":true},{"title":"No sensors","offer_id":55040795214151,"sku":"NM-SM","price":28.95,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0878\/0575\/5719\/files\/isiks-tech-nevermore-stealthmax-mini-controller-pcb-v1-canusb-pre-order-7141367.jpg?v=1791836718"},{"product_id":"isiks-tech-nevermore-stealthmax-pcb-3","title":"Isik's Tech Nevermore Stealthmax PCB 3 for Stealthmax V2, CAN\/USB-C (Pre-Order)","description":"\u003cp\u003eThe controller for a Nevermore Stealthmax V2. Everything the V2 can do runs from this one board in Klipper: the fan, the servo that closes the vent, a Peltier or heater, UV LEDs and the air-quality sensors.\u003c\/p\u003e\u003ch3\u003eWhat's on the board\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eSTM32G0B1 MCU, Klipper over CAN or USB-C\u003c\/li\u003e\n\u003cli\u003e24 V (VIN) 4-pin PWM fan output\u003c\/li\u003e\n\u003cli\u003e2× I2C sensor ports for SGP40\/BME280\u003c\/li\u003e\n\u003cli\u003e3× thermistor ports plus an onboard thermistor\u003c\/li\u003e\n\u003cli\u003ePeltier MOSFET, constant-current UV LED driver, ARGB and servo outputs\u003c\/li\u003e\n\u003cli\u003eSlide switch for CAN termination, MX3.0 for power and CAN, 5 V buck converter\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eGood to know\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eThe sensor boards are sold separately, and you need two. See Nevermore Sensors.\u003c\/li\u003e\n\u003cli\u003eA CAN port cover (XT30 or MX3.0) is optional and makes the wiring plug-and-play.\u003c\/li\u003e\n\u003cli\u003eAll PH and MX3.0 connectors you need are included.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003ePre-order.\u003c\/strong\u003e Isik has this board on backorder until October, so expect it to ship from the Netherlands in 4–6 weeks. No import fees or customs on top.\u003c\/p\u003e\u003cp\u003eDesigned and assembled by Isik's Tech. Docs: \u003ca href=\"https:\/\/docs.isiks.tech\/Nevermore\/Controller\/\" target=\"_blank\" rel=\"noopener\"\u003ehttps:\/\/docs.isiks.tech\/Nevermore\/Controller\/\u003c\/a\u003e\u003c\/p\u003e","brand":"Isik's Tech","offers":[{"title":"Default Title","offer_id":55040795246919,"sku":"NM-SM3","price":69.95,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0878\/0575\/5719\/files\/isiks-tech-nevermore-stealthmax-pcb-3-for-stealthmax-v2-canusb-c-pre-order-5751453.jpg?v=1791836717"},{"product_id":"isiks-tech-nevermore-bme280-sgp40-sensor","title":"Isik's Tech BME280 \u0026 SGP40 Air Quality Sensor for Nevermore Filters (Pre-Order)","description":"\u003cp\u003eA tiny sensor board (10.6 × 10.6 mm) with a BME280 for temperature, humidity and pressure and an SGP40 for VOCs. Put one on the intake and one on the exhaust of your Nevermore and Klipper shows you how well the filter is working.\u003c\/p\u003e\u003ch3\u003eSpecs\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eBME280 + SGP40 on one board\u003c\/li\u003e\n\u003cli\u003e3.3 V, I2C\u003c\/li\u003e\n\u003cli\u003ePlugs into the sensor ports on the Stealthmax PCB 3 and the Stealthmax \u0026amp; Mini PCB\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eGood to know\u003c\/h3\u003e\u003cp\u003eThe Stealthmax PCB 3 uses two, one for intake and one for exhaust. The price is per sensor board.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003ePre-order.\u003c\/strong\u003e I'm bringing this board in from Isik's Tech in the US. Expected to ship in 3–4 weeks. As soon as it lands in the Netherlands it goes out to you, and you pay no import fees or customs on top.\u003c\/p\u003e\u003cp\u003eDesigned and assembled by Isik's Tech.\u003c\/p\u003e","brand":"Isik's Tech","offers":[{"title":"Default Title","offer_id":55040795279687,"sku":"NM-SENS","price":29.95,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0878\/0575\/5719\/files\/isiks-tech-bme280-sgp40-air-quality-sensor-for-nevermore-filters-pre-order-1075049.jpg?v=1791836717"},{"product_id":"isiks-tech-stealthmax-pcb-3-can-port-cover","title":"Isik's Tech Stealthmax PCB 3 CAN Port Cover, XT30 or MX3.0 Daisy Chain (Pre-Order)","description":"\u003cp\u003eA port cover for a Stealthmax V2 build with the PCB 3. It comes with the internal cable already crimped and soldered, so you plug it into the PCB 3 and close the lid. No crimping inside a cramped filter housing.\u003c\/p\u003e\u003ch3\u003ePick your connector\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eXT30 (2+2)\u003c\/strong\u003e: XT30 connector for power and CAN.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMX3.0 with daisy chain\u003c\/strong\u003e: Micro-Fit 3.0 connector with a daisy-chain port to carry the CAN bus on to the next device.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFits\u003c\/h3\u003e\u003cp\u003eNevermore Stealthmax V2 with the Isik's Tech Stealthmax PCB 3.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003ePre-order.\u003c\/strong\u003e I'm bringing these in from Isik's Tech in the US. Expected to ship in 3–4 weeks. As soon as they land in the Netherlands yours goes out to you, and you pay no import fees or customs on top.\u003c\/p\u003e\u003cp\u003eDesigned and assembled by Isik's Tech.\u003c\/p\u003e","brand":"Isik's Tech","offers":[{"title":"XT30 (2+2)","offer_id":55040797704519,"sku":"NM-SM3-XT30-PC","price":8.95,"currency_code":"EUR","in_stock":true},{"title":"MX3.0 with daisy chain","offer_id":55040797737287,"sku":"NM-SM3-MX3.0-PC","price":9.95,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0878\/0575\/5719\/files\/isiks-tech-stealthmax-pcb-3-can-port-cover-xt30-or-mx30-daisy-chain-pre-order-5208479.jpg?v=1791836717"},{"product_id":"isiks-tech-jst-xh-fan-splitter","title":"Isik's Tech 2-Pin JST-XH Fan Splitter, 1 to 3 (Pre-Order)","description":"\u003cp\u003eA tiny PCB that turns one 2-pin JST-XH fan output into three. Handy when your board has fewer fan ports than your electronics bay has fans.\u003c\/p\u003e\u003ch3\u003eSpecs\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e4× 2-pin JST-XH connectors: 1 in, 3 out\u003c\/li\u003e\n\u003cli\u003e4 male connector housings with pins included\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eGood to know\u003c\/h3\u003e\u003cp\u003eIt splits power only, so there's no tach or PWM signal. Every fan on the splitter runs at the same speed.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003ePre-order.\u003c\/strong\u003e I'm bringing this board in from Isik's Tech in the US. Expected to ship in 3–4 weeks. As soon as it lands in the Netherlands it goes out to you, and you pay no import fees or customs on top.\u003c\/p\u003e\u003cp\u003eDesigned and assembled by Isik's Tech.\u003c\/p\u003e","brand":"Isik's Tech","offers":[{"title":"Default Title","offer_id":55040797802823,"sku":"XH-SPLIT","price":5.95,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0878\/0575\/5719\/files\/isiks-tech-2-pin-jst-xh-fan-splitter-1-to-3-pre-order-8409329.jpg?v=1791836715"},{"product_id":"isiks-tech-usb-toolhead-adapter","title":"Isik's Tech USB Adapter for Toolhead Boards (Pre-Order)","description":"\u003cp\u003eLets you run a USB toolhead board (or a board like the OwlFC-Mini) over a single umbilical to your Raspberry Pi, instead of setting up CAN. It uses the same protection circuit as the Birds' Nest USB hub.\u003c\/p\u003e\u003ch3\u003eWorks with\u003c\/h3\u003e\u003cp\u003eUSB toolhead boards and the OwlFC-Mini in USB mode.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003ePre-order.\u003c\/strong\u003e I'm bringing this board in from Isik's Tech in the US. Expected to ship in 3–4 weeks. As soon as it lands in the Netherlands it goes out to you, and you pay no import fees or customs on top.\u003c\/p\u003e\u003cp\u003eDesigned and assembled by Isik's Tech.\u003c\/p\u003e","brand":"Isik's Tech","offers":[{"title":"Default Title","offer_id":55040797901127,"sku":"USB-ADAPTER","price":9.95,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0878\/0575\/5719\/files\/isiks-tech-usb-adapter-for-toolhead-boards-pre-order-1979068.jpg?v=1791836718"},{"product_id":"isiks-tech-hedgehog-klipper-io-expander","title":"Isik's Tech Hedgehog CAN\/USB Klipper I\/O Expander, 31 Pins (Pre-Order)","description":"\u003cp\u003eOut of pins on your main board? Hedgehog adds 31 I\/O pins to Klipper over CAN or USB. Each pin sits on a standard 2.54 mm header with its own 3.3 V and GND pair next to it, so a switch, sensor or relay plugs in without a breadboard.\u003c\/p\u003e\u003ch3\u003eWhat's on the board\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eSTM32G0B1 MCU, built-in CAN transceiver plus USB\u003c\/li\u003e\n\u003cli\u003e31 I\/O pins on 2.54 mm headers, 3.3 V\/GND beside each\u003c\/li\u003e\n\u003cli\u003ePull-ups and protection for 3 thermistors\u003c\/li\u003e\n\u003cli\u003e24 V input with onboard 3.3 V and 5 V regulators, 120 Ω CAN termination jumper\u003c\/li\u003e\n\u003cli\u003eKlipper with Katapult support; also runs STM32Duino\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003ePick your version\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSoldered\u003c\/strong\u003e: pin headers already soldered on.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNot soldered\u003c\/strong\u003e: bare board, solder only the headers you need.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eGood to know\u003c\/h3\u003e\u003cp\u003eThe pins have no preset functions. You configure every one yourself in Klipper, and some SPI pins aren't supported by Klipper.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003ePre-order.\u003c\/strong\u003e I'm bringing this board in from Isik's Tech in the US. Expected to ship in 3–4 weeks. As soon as it lands in the Netherlands it goes out to you, and you pay no import fees or customs on top.\u003c\/p\u003e\u003cp\u003eDesigned and assembled by Isik's Tech. Docs: \u003ca href=\"https:\/\/docs.isiks.tech\/hedgehog\/manual\/\" target=\"_blank\" rel=\"noopener\"\u003ehttps:\/\/docs.isiks.tech\/hedgehog\/manual\/\u003c\/a\u003e\u003c\/p\u003e","brand":"Isik's Tech","offers":[{"title":"Soldered","offer_id":55040797933895,"sku":"HEDGEHOG-SOLDERED","price":30.95,"currency_code":"EUR","in_stock":true},{"title":"Not soldered","offer_id":55040797966663,"sku":"HEDGEHOG-NOPINS","price":25.95,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0878\/0575\/5719\/files\/isiks-tech-hedgehog-canusb-klipper-io-expander-31-pins-pre-order-7617756.jpg?v=1791836721"},{"product_id":"tes-microflip-n20-motor-reverser-pcb-for-goose-belt-purger","title":"TES MicroFlip N20 Motor Reverser PCB for Goose Belt Purger","description":"\u003cp\u003eA thumb-sized board that goes between your controller and the N20 motor on a Goose Belt Purger. The protection parts the GBP docs ask for are already on the board, so you don't have to solder a diode, resistor and capacitor onto the motor leads. Belt running the wrong way? Flip the slide switch instead of re-crimping the wires.\u003c\/p\u003e\n\u003ch3\u003eSpecs\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eFor N20-size brushed DC gear motors, 3–12 V, up to 1 A\u003c\/li\u003e\n\u003cli\u003eDPDT slide switch that swaps both motor leads\u003c\/li\u003e\n\u003cli\u003eRC snubber on board against brush noise and voltage spikes\u003c\/li\u003e\n\u003cli\u003e2-pin JST-PH connector\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eIn the bag\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eMicroFlip PCB\u003c\/li\u003e\n\u003cli\u003e1× 2-pin JST-PH housing with 4 crimp pins (you need 2, the other 2 are spares)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eGood to know\u003c\/h3\u003e\n\u003cp\u003eThe board is rated for 12 V. If your fan outputs run at 24 V, take the motor power from a 12 V or 5 V output instead.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIn stock in the Netherlands.\u003c\/strong\u003e It ships from my workshop within 2–4 working days, no import fees or customs on top.\u003c\/p\u003e\n\u003cp\u003eDesigned by Tröndle Embedded Systems (TES) in Switzerland, open source under GPL-3.0.\u003c\/p\u003e","brand":"Tröndle Embedded Systems","offers":[{"title":"Default Title","offer_id":55059882967367,"sku":"TES-MICROFLIP","price":3.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0878\/0575\/5719\/files\/tes-microflip-n20-motor-reverser-pcb-for-goose-belt-purger-9589890.jpg?v=1791836723"},{"product_id":"xol-toolhead-hardware-kit","title":"Xol Toolhead Hardware Kit — Carriage and Toolhead","description":"\u003cp\u003eEvery screw, nut and small part for a complete Xol build — carriage and toolhead — in one bag, all A2 stainless so the whole build matches. Packed from the official Xol BOM, with a spare of the parts everyone drops on the floor.\u003c\/p\u003e\n\n\u003ch4\u003eScrews\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e16×\u003c\/strong\u003e M3x8 socket head (DIN 912)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e6×\u003c\/strong\u003e M3x16 socket head\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e2×\u003c\/strong\u003e M3x20 socket head — for a Sherpa-Mini extruder\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e3×\u003c\/strong\u003e M3x6 button head (ISO 7380)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e4×\u003c\/strong\u003e M2.5x16 — hotend fan\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e8×\u003c\/strong\u003e M2.5x8 — part cooling fans, XolPAP included\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e2×\u003c\/strong\u003e M2x10 self-tapping — X endstop\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch4\u003eNuts and washers\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e8×\u003c\/strong\u003e M3 hex nut\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e2×\u003c\/strong\u003e M3 washer (DIN 9021)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch4\u003eThe rest\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e10×\u003c\/strong\u003e M3 heatset insert, Voron spec 5 × 4 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e2×\u003c\/strong\u003e 3x30 dowel pin and \u003cstrong\u003e2×\u003c\/strong\u003e metal tube — belt mount\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e2×\u003c\/strong\u003e M3x20 standoff — toolhead board\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e2×\u003c\/strong\u003e cable tie and a length of PTFE tube\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWorks with any extruder: the M3x20 for a Sherpa-Mini and the M3x8 for everything else are both in the bag.\u003c\/p\u003e\n\n\u003cp\u003eThe Xol is designed by DW-Tas (github.com\/Armchair-Heavy-Industries\/Xol-Toolhead). \u003cstrong\u003e10% of every Xol kit I sell goes to him to support the project\u003c\/strong\u003e — printed parts and hardware alike.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eNot included:\u003c\/strong\u003e fans, LEDs, hotend, extruder, toolhead board, rail and belts. Printed parts are a separate listing.\u003c\/p\u003e\n\n\u003cp\u003eMade to order and packed by hand — allow 1 to 2 weeks.\u003c\/p\u003e","brand":"Pjotr3DShop","offers":[{"title":"Default Title","offer_id":55060427047239,"sku":"VRN-HW-XOL","price":16.95,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0878\/0575\/5719\/files\/xol-toolhead-printed-parts-kit-abs-two-colours-5642009_695820cc-d2fe-4e9f-ba75-2d189fab818a.png?v=1789668967"},{"product_id":"a4t-toolhead-hardware-kit","title":"A4T Hardware Kit","description":"\u003cp\u003eEvery screw, nut, heatset insert, standoff and pin from the A4T BOM, for an A4T on an Xol carriage, in A2 stainless. Built from the official A4T and Xol carriage BOMs, with the extruder screws for all three common extruders in the bag so you don't have to pick before you order.\u003c\/p\u003e\n\n\u003ch4\u003eScrews\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e10×\u003c\/strong\u003e M3x8 socket head (DIN 912)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e2×\u003c\/strong\u003e M3x50 socket head — bottom cowling\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e2×\u003c\/strong\u003e M3x6 button head (ISO 7380) — hotend adapter on the carriage\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e2×\u003c\/strong\u003e M3x16, \u003cstrong\u003e2×\u003c\/strong\u003e M3x12 and \u003cstrong\u003e1×\u003c\/strong\u003e M3x20 — extruder mount, whichever you run\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch4\u003eNuts and washers\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e5×\u003c\/strong\u003e M3 square nut (DIN 562)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e5×\u003c\/strong\u003e M3 hex nut\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e2×\u003c\/strong\u003e M3 washer (DIN 9021)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch4\u003eThe rest\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e8×\u003c\/strong\u003e M3 heatset insert, Voron spec 5 × 4 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e2×\u003c\/strong\u003e 3x30 dowel pin and \u003cstrong\u003e2×\u003c\/strong\u003e metal tube — belt mount\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e2×\u003c\/strong\u003e M3x20 standoff — toolhead board\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e2×\u003c\/strong\u003e cable tie\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eFits the WW-BMG, the Sherpa-Mini and the Wrist-Watch G2: all three extruder screw lengths are in the bag.\u003c\/p\u003e\n\n\u003cp\u003eThe A4T is designed by DW-Tas (github.com\/Armchair-Heavy-Industries\/A4T). \u003cstrong\u003e10% of every A4T kit I sell goes to him to support the project\u003c\/strong\u003e — printed parts and hardware alike.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eNot included:\u003c\/strong\u003e fans, LEDs, hotend, extruder, toolhead board and printed parts. See below for where to get them.\u003c\/p\u003e\n\n\u003cp\u003eMade to order and packed by hand — allow 1 to 2 weeks.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eA4T set: 5% off.\u003c\/strong\u003e Buy this kit together with 2× \u003ca href=\"\/products\/gdstime-4010-blower-fan-24v-dual-ball-bearing-gdb4010-for-a4t\"\u003eGDSTIME 4010 blower\u003c\/a\u003e and the \u003ca href=\"\/products\/delta-2510-hotend-fan-5v\"\u003eDelta 2510 hotend fan\u003c\/a\u003e and all four get 5% off, applied automatically in the cart.\u003c\/p\u003e\n\u003ch3\u003eBuilding a complete A4T?\u003c\/h3\u003e\n\u003cp\u003eHow the official A4T BOM maps to what I stock:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePrinted parts:\u003c\/strong\u003e \u003ca href=\"\/products\/a4t-toolhead-printed-parts-kit-abs-two-colours-extruder-parts-included\"\u003eA4T Printed Parts Kit\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eScrews, square nuts, heatsets and standoffs:\u003c\/strong\u003e this kit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e2510 hotend fan, Delta ASB02505SHA-AY6B 5 V:\u003c\/strong\u003e \u003ca href=\"\/products\/delta-2510-hotend-fan-5v\"\u003eDelta 2510 Hotend Fan\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e2× 4010 part cooling blower, GDSTIME 24 V 12,000 rpm:\u003c\/strong\u003e \u003ca href=\"\/products\/gdstime-4010-blower-fan-24v-dual-ball-bearing-gdb4010-for-a4t\"\u003eGDSTIME 4010 Blower Fan\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e3× NeoPixel LED PCB:\u003c\/strong\u003e \u003ca href=\"\/products\/neopixel-rgbw-mini-button-pcb\"\u003eNeoPixel RGBW 3-pack\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLED diffuser:\u003c\/strong\u003e \u003ca href=\"\/products\/a4t-toolhead-led-diffuser-printed-part\"\u003eA4T LED Diffuser\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHotend:\u003c\/strong\u003e \u003ca href=\"\/products\/e3d-revo-voron-coldside\"\u003eE3D Revo Voron Coldside\u003c\/a\u003e with a \u003ca href=\"\/products\/e3d-revo-hotside-kit-24v\"\u003eRevo Hotside Kit\u003c\/a\u003e, or your own Dragon, Rapido or Chube\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOn a Monolith gantry:\u003c\/strong\u003e \u003ca href=\"\/products\/monolith-xol-a4t-slm-belt-clips-aluminium\"\u003eSLM aluminium belt clips\u003c\/a\u003e (pre-order)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eStill to source elsewhere: the extruder gears and motor, and the wire and connectors for the LED harness.\u003c\/p\u003e","brand":"Pjotr3DShop","offers":[{"title":"Default Title","offer_id":55060427505991,"sku":"VRN-HW-A4T","price":15.95,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0878\/0575\/5719\/files\/a4t-toolhead-printed-parts-kit-abs-two-colours-extruder-parts-included-9803925_36ab2739-1aed-47ec-8379-24cc8d7f34ac.png?v=1789668976"},{"product_id":"dragon-burner-hardware-kit","title":"Dragon Burner Hardware Kit — Screws and Heatsets","description":"\u003cp\u003eThe fasteners for a Dragon Burner v8, in A2 stainless. Every extruder and hotend-mount length is in the bag — 14, 18 and 20 mm — so it fits whichever combination you run.\u003c\/p\u003e\n\n\u003ch4\u003eSocket head (DIN 912)\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e2×\u003c\/strong\u003e M3x35 — cowl to X carriage\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1×\u003c\/strong\u003e M3x20 — X carriage to toolhead, from the rear\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e2×\u003c\/strong\u003e M3x50 — ADXL mount, if you run one\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch4\u003eButton head (ISO 7380)\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e4×\u003c\/strong\u003e M3x20 — extruder mount to cowl\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e2×\u003c\/strong\u003e M3x18 and \u003cstrong\u003e2×\u003c\/strong\u003e M3x14 — extruder to hotend mount, pick your length\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e2×\u003c\/strong\u003e M3x16 — V6 hotend mount\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e2×\u003c\/strong\u003e M3x6 — rear brace to lower cowl\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch4\u003eThe rest\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e2×\u003c\/strong\u003e M3 hex nut\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e6×\u003c\/strong\u003e M3 heatset insert, Voron spec 5 × 4 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e2×\u003c\/strong\u003e cable tie\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003e\u003cstrong\u003eNot included:\u003c\/strong\u003e 4010 blowers, 3010 hotend fan, LEDs, hotend and extruder. Printed parts are a separate listing.\u003c\/p\u003e\n\n\u003cp\u003eMade to order and packed by hand — allow 1 to 2 weeks.\u003c\/p\u003e","brand":"Pjotr3DShop","offers":[{"title":"Default Title","offer_id":55060428357959,"sku":"VRN-HW-DB","price":8.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0878\/0575\/5719\/files\/dragon-burner-toolhead-printed-parts-kit-abs-two-colours-6439752_d0a44b2a-388f-422d-86a6-8b47311ea28a.png?v=1789668979"},{"product_id":"rapid-burner-hardware-kit","title":"Rapid Burner Hardware Kit — Screws and Heatsets","description":"\u003cp\u003eThe fasteners for a Rapid Burner v8, in A2 stainless, straight from the project BOM. All three extruder-to-hotend-mount lengths are in the bag.\u003c\/p\u003e\n\n\u003ch4\u003eSocket head (DIN 912)\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e2×\u003c\/strong\u003e M3x12 — cowl to X carriage\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e2×\u003c\/strong\u003e M3x8 — cowl to hotend mount\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1×\u003c\/strong\u003e M3x20 — X carriage to toolhead, from the rear\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e2×\u003c\/strong\u003e M3x25 — ADXL mount, if you run one\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e2×\u003c\/strong\u003e M3x16 — V6 hotend mount\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch4\u003eButton head (ISO 7380)\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e2×\u003c\/strong\u003e M3x20, \u003cstrong\u003e2×\u003c\/strong\u003e M3x18 and \u003cstrong\u003e2×\u003c\/strong\u003e M3x14 — extruder to hotend mount, pick your length\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e2×\u003c\/strong\u003e M3x6 — rear brace to lower cowl\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch4\u003eThe rest\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e2×\u003c\/strong\u003e M3 square nut (DIN 562)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e6×\u003c\/strong\u003e M3 heatset insert, Voron spec 5 × 4 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e2×\u003c\/strong\u003e cable tie\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003e\u003cstrong\u003eNot included:\u003c\/strong\u003e 4010 blowers, 3010 hotend fan, LEDs, hotend and extruder. Printed parts are a separate listing.\u003c\/p\u003e\n\n\u003cp\u003eMade to order and packed by hand — allow 1 to 2 weeks.\u003c\/p\u003e","brand":"Pjotr3DShop","offers":[{"title":"Default Title","offer_id":55060428456263,"sku":"VRN-HW-RB","price":8.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0878\/0575\/5719\/files\/rapid-burner-hardware-kit-screws-and-heatsets-9696254.png?v=1791836711"},{"product_id":"goose-belt-purger-hardware-kit","title":"Goose Belt Purger Hardware Kit — Motor, Band and MicroFlip Included","description":"\u003cp\u003eEverything except the printed parts for a Goose Belt Purger, the belt purge system for a Voron Trident or 2.4. The MicroFlip board is in the kit, so you don't wire a motor straight to a fan port and cook it.\u003c\/p\u003e\n\n\u003ch4\u003eThe moving parts\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e1×\u003c\/strong\u003e N20 \/ GA12 gear motor, 6 V\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1×\u003c\/strong\u003e silicone band, 12 mm — the belt itself\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e3×\u003c\/strong\u003e 623-2RS bearing\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e2×\u003c\/strong\u003e magnet, 6 × 3 mm N35\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1×\u003c\/strong\u003e MicroFlip board by TES — replaces the diode, resistor and capacitor\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch4\u003eScrews, for both mount options\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e10×\u003c\/strong\u003e M3x8 socket head (DIN 912)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1×\u003c\/strong\u003e M3x20, \u003cstrong\u003e1×\u003c\/strong\u003e M3x25, \u003cstrong\u003e1×\u003c\/strong\u003e M3x30 and \u003cstrong\u003e1×\u003c\/strong\u003e M3x35 socket head\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e2×\u003c\/strong\u003e M3x20 countersunk (DIN 7991)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1×\u003c\/strong\u003e M3x6 set screw\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch4\u003eThe rest\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e1×\u003c\/strong\u003e M3 hex nut and \u003cstrong\u003e3×\u003c\/strong\u003e M3 nylock nut\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e14×\u003c\/strong\u003e M3 heatset insert, Voron spec 5 × 4 mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eDesign by Graylag-PD, published under GPL-3.0. Printed parts are a separate listing.\u003c\/p\u003e\n\n\u003cp\u003eMade to order and packed by hand — allow 1 to 2 weeks.\u003c\/p\u003e","brand":"Pjotr3DShop","offers":[{"title":"Default Title","offer_id":55060428587335,"sku":"VRN-HW-GBP","price":14.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0878\/0575\/5719\/files\/goose-belt-purger-hardware-kit-motor-band-and-microflip-included-2879072.jpg?v=1791836719"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0878\/0575\/5719\/collections\/3d-printer-parts.png?v=1791836588","url":"https:\/\/pjotr3dshop.com\/collections\/voron-printed-parts.oembed?page=4","provider":"Pjotr3DShop","version":"1.0","type":"link"}