{"title":"Box Turtle \u0026 Night Owl","description":"\u003cp\u003eParts for Armored Turtle's filament changers. For the Box Turtle: the AFC-Lite controller that runs all four lanes, the Turtle Neck 2 Remastered buffer with its own Klipper MCU, and the Compensator linear buffer PCB. For the Night Owl: the OwlFC-Mini controller and the USB toolhead adapter. Shipped from the Netherlands, VAT included, no import fees.\u003c\/p\u003e","products":[{"product_id":"isiks-tech-afc-lite-box-turtle-controller","title":"Isik's Tech AFC-Lite controller-PCB voor Box Turtle","description":"\u003cp\u003eHet controllerboard voor de Box Turtle automatische filamentwisselaar van Armored Turtle. Eén board stuurt alle vier de lanes aan: steppers voor de extruders, brushed DC-drivers voor de N20-respoolermotoren en alle endstops en leds.\u003c\/p\u003e\u003ch3\u003eWat zit er op het board\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eSTM32H723-MCU, USB-C en CAN (1 Mbit), 24 V in via MX3.0\u003c\/li\u003e\u003cli\u003e4× stepstick-slots voor TMC2209\u003c\/li\u003e\u003cli\u003e4× brushed DC-motordrivers\u003c\/li\u003e\u003cli\u003e12× endstoppoorten, 4× RGB-ledpoorten, 1× 5 V fanpoort (altijd aan)\u003c\/li\u003e\u003cli\u003eKlipper met Katapult-bootloader, werkt met de AFC Klipper Add-On\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eGoed om te weten\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eStepsticks zitten er niet bij. SPI-stepsticks werken alleen in STEP\/DIR-modus.\u003c\/li\u003e\u003cli\u003eZet geen Cartographer v3-probe op dezelfde CAN-bus (v4 is prima).\u003c\/li\u003e\u003cli\u003eMX3.0- en XH-connectoren zitten erbij.\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eOp voorraad in Nederland.\u003c\/strong\u003e Verzonden vanuit Zutphen binnen 1–2 werkdagen, en bestellingen binnen de EU betalen geen invoerkosten of douane bovenop de prijs.\u003c\/p\u003e\u003cp\u003eOntworpen en geassembleerd door Isik's Tech. Documentatie: \u003ca href=\"https:\/\/docs.isiks.tech\/box-turtle\/afc-lite\/manual\/\" target=\"_blank\" rel=\"noopener\"\u003ehttps:\/\/docs.isiks.tech\/box-turtle\/afc-lite\/manual\/\u003c\/a\u003e\u003c\/p\u003e","brand":"Isik's Tech","offers":[{"title":"Default Title","offer_id":55040790856007,"sku":"AFC-Lite","price":79.95,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0878\/0575\/5719\/files\/isiks-tech-afc-lite-controller-pcb-for-box-turtle-3071776.jpg?v=1794653957"},{"product_id":"isiks-tech-owlfc-mini-night-owl-controller","title":"Isik's Tech OwlFC-Mini controller voor Night Owl filamentwisselaar","description":"\u003cp\u003eIsiks nieuwe controller voor de Night Owl automatische filamentwisselaar. Klein genoeg om in de unit zelf te zitten, en hij stuurt beide extrudersteppers, alle schakelaars en de leds aan vanaf één board via CAN of USB.\u003c\/p\u003e\u003ch3\u003eWat zit er op het board\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eSTM32G0B1-MCU, CAN en USB met een MUX\u003c\/li\u003e\u003cli\u003e2× TMC2209-stepperdrivers voor de extruders\u003c\/li\u003e\u003cli\u003e7× interne en 2× externe schakelaarpoorten\u003c\/li\u003e\u003cli\u003eARGB-leduitgang, optionele fanpoort (altijd aan)\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eGoed om te weten\u003c\/h3\u003e\u003cp\u003eVoor een USB-verbinding heb je ook de Isik's Tech USB-toolheadadapter nodig, die ik los verkoop.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eOp voorraad in Nederland.\u003c\/strong\u003e Verzonden vanuit Zutphen binnen 1–2 werkdagen, en bestellingen binnen de EU betalen geen invoerkosten of douane bovenop de prijs.\u003c\/p\u003e\u003cp\u003eOntworpen en geassembleerd door Isik's Tech.\u003c\/p\u003e","brand":"Isik's Tech","offers":[{"title":"Default Title","offer_id":55040795148615,"sku":"OWLFC-MINI","price":59.95,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0878\/0575\/5719\/files\/isiks-tech-owlfc-mini-controller-for-night-owl-filament-changer-pre-order-5775773.jpg?v=1791836726"},{"product_id":"isiks-tech-usb-toolhead-adapter","title":"Isik's Tech USB-adapter voor toolheadboards","description":"\u003cp\u003eHiermee draai je een USB-toolheadboard (of een board als de OwlFC-Mini) via één umbilical naar je Raspberry Pi, in plaats van CAN op te zetten. Hij gebruikt dezelfde beveiligingsschakeling als de Birds' Nest USB-hub.\u003c\/p\u003e\u003ch3\u003eWerkt met\u003c\/h3\u003e\u003cp\u003eUSB-toolheadboards en de OwlFC-Mini in USB-modus.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eOp voorraad in Nederland.\u003c\/strong\u003e Verzonden vanuit Zutphen binnen 1–2 werkdagen, en bestellingen binnen de EU betalen geen invoerkosten of douane bovenop de prijs.\u003c\/p\u003e\u003cp\u003eOntworpen en geassembleerd door Isik's Tech.\u003c\/p\u003e","brand":"Isik's Tech","offers":[{"title":"Default Title","offer_id":55040797901127,"sku":"USB-ADAPTER","price":9.95,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0878\/0575\/5719\/files\/isiks-tech-usb-adapter-for-toolhead-boards-pre-order-1979068.jpg?v=1791836718"},{"product_id":"tes-turtle-neck-2-remastered-filament-buffer-with-onboard-klipper-mcu-pre-order","title":"TES Turtle Neck 2 Remastered Filament Buffer with Onboard Klipper MCU (Pre-Order)","description":"\u003cp\u003eThe Turtle Neck 2, redone. Same footprint and mounting as the original TN2, but the electronics are completely redesigned: the Klipper MCU now sits on the buffer itself, so the wiring to your filament changer or autoloader gets a lot cleaner. The buffer position comes from a Compensator linear Hall sensor array instead of switches, which gives AFC a true linear position with known endpoints, no calibration needed.\u003c\/p\u003e\u003ch3\u003eWhat's on the board\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eOnboard Klipper MCU, USB by default, optional 24 V power and CAN bus\u003c\/li\u003e\n\u003cli\u003eBuilt-in Compensator linear buffer with dual raw Hall signals\u003c\/li\u003e\n\u003cli\u003eRuns up to 6 Compensator buffers from this one MCU\u003c\/li\u003e\n\u003cli\u003e5 extra ADC\/endstop-capable inputs\u003c\/li\u003e\n\u003cli\u003eNeoPixel\/RGB addressable LED output\u003c\/li\u003e\n\u003cli\u003eModular inlet for buffer-mounted filament hubs\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eIn the bag\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e1× TN2R PCB\u003c\/li\u003e\n\u003cli\u003e1× 6×3 mm N52 magnet\u003c\/li\u003e\n\u003cli\u003e2× ECAS04 bowden collets\u003c\/li\u003e\n\u003cli\u003e1× 0.8×12×30 mm compression spring\u003c\/li\u003e\n\u003cli\u003e4× M3×5×4 heat-set inserts, 4× M3×8 SHCS, 2× M3×10 FHCS, 1× M2.5×10 FHCS\u003c\/li\u003e\n\u003cli\u003e4× adhesive felt pieces\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eGood to know\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ePrinted parts are not included.\u003c\/li\u003e\n\u003cli\u003eThis is a limited Remastered run, not a permanently stocked item.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003ePre-order.\u003c\/strong\u003e I'm bringing this in from Pulsar3D in the US. They're waiting on their own batch, so I can't give a ship date yet. As soon as it lands in the Netherlands it goes out to you, and you pay no import fees or customs on top.\u003c\/p\u003e\u003cp\u003eDesigned by NEI and Tröndle Embedded Systems (TES). Assembly manual: \u003ca href=\"https:\/\/embeds.daedum.com\/manual.html?manual=9c00071b-3bf3-4d16-b1be-1044af001a48\" target=\"_blank\" rel=\"noopener\"\u003eTN2 Remastered manual\u003c\/a\u003e\u003c\/p\u003e","brand":"Tröndle Embedded Systems","offers":[{"title":"Default Title","offer_id":55270382240071,"sku":"TES-TN2R","price":54.95,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0878\/0575\/5719\/files\/tes-turtle-neck-2-remastered-filament-buffer-with-onboard-klipper-mcu-pre-order-3187142.png?v=1794653956"},{"product_id":"tes-compensator-linear-filament-buffer-pcb-hall-sensor-pre-order","title":"TES Compensator Linear Filament Buffer PCB, Hall Sensor (Pre-Order)","description":"\u003cp\u003eA filament buffer that knows where it is. Instead of an endstop that only tells you \"full\" or \"empty\", the Compensator reads the buffer position continuously with two linear Hall sensors and a single moving magnet. Your controller gets a true analog position on an ADC input: centre and both travel limits are known, so filament-management systems like AFC can run closed-loop without calibration.\u003c\/p\u003e\u003ch3\u003eWhat it does\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDual linear Hall-effect sensing, contactless, no mechanical switches\u003c\/li\u003e\n\u003cli\u003eContinuous analog buffer-position output, plus the two raw Hall signals\u003c\/li\u003e\n\u003cli\u003eTells the difference between normal filament movement, the buffer filling or emptying, centre and the travel limits\u003c\/li\u003e\n\u003cli\u003eFor multi-colour systems, filament feeders, autoloaders and toolchangers\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eGood to know\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ePCB only. Printed parts are not included.\u003c\/li\u003e\n\u003cli\u003eThe Turtle Neck 2 Remastered has this buffer built in and runs up to 6 of these from its MCU.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003ePre-order.\u003c\/strong\u003e I'm bringing these in from Pulsar3D in the US. They're waiting on their own batch, so I can't give a ship date yet. As soon as they land in the Netherlands they go out to you, and you pay no import fees or customs on top.\u003c\/p\u003e\u003cp\u003eDesigned by Tröndle Embedded Systems (TES). Product page: \u003ca href=\"https:\/\/pulsar-3d.com\/products\/compensator-linear-buffer-pcb\" target=\"_blank\" rel=\"noopener\"\u003epulsar-3d.com\u003c\/a\u003e\u003c\/p\u003e","brand":"Tröndle Embedded Systems","offers":[{"title":"Single","offer_id":55270397116743,"sku":"TES-COMP-1","price":6.95,"currency_code":"EUR","in_stock":true},{"title":"5-pack","offer_id":55270397149511,"sku":"TES-COMP-5","price":29.95,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0878\/0575\/5719\/files\/tes-compensator-linear-filament-buffer-pcb-hall-sensor-pre-order-8419567.jpg?v=1791836718"},{"product_id":"d-shaft-5-60-mm","title":"Box Turtle v1.1 Respooler D-Shaft — 5 × 60 mm, Single or 4-Pack","description":"\u003cp\u003eThe new respooler shaft for Box Turtle v1.1: a 5 mm D-shaft, 60 mm long, one per spooler. Upgrading all four lanes? Take the 4-pack.\u003c\/p\u003e\n\u003ch4\u003eSpecs\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e5 mm diameter, 60 mm length\u003c\/li\u003e\n\u003cli\u003eD-profile flat, so the respooler gear sits without slipping\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eNot included:\u003c\/strong\u003e printed respooler parts, bearings and the respooler gear. Quantities: one shaft per spooler, four per Box Turtle.\u003c\/p\u003e","brand":"Pjotr3DShop","offers":[{"title":"Single","offer_id":55293878665543,"sku":"BT-HW-DSHAFT-1","price":2.95,"currency_code":"EUR","in_stock":true},{"title":"4-pack","offer_id":55293878698311,"sku":"BT-HW-DSHAFT-4","price":9.95,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0878\/0575\/5719\/files\/box-turtle-v11-respooler-d-shaft-5-60-mm-single-or-4-pack-6629011.jpg?v=1794653952"}],"url":"https:\/\/pjotr3dshop.com\/nl\/collections\/box-turtle.oembed","provider":"Pjotr3DShop","version":"1.0","type":"link"}