GDSTIME 4010 Blower Fan, 24V Dual Ball Bearing — GDB4010 for A4T

Details

A 40 x 40 x 10 mm blower fan for part cooling on 24 V printers, and the size the A4T toolhead uses for its part cooling. This is the 12,000 rpm version, so it moves more air than the common 9,500 rpm GDB4010. GDSTIME's GDB4010 runs on dual ball bearings, which cope with a heated chamber far better than the sleeve-bearing blowers that come with cheap kits. It arrives with a 2-pin JST-XH plug fitted, so it goes straight into the fan header on most Klipper and toolhead boards.

• GDSTIME GDB4010 brushless DC blower
• 24 V DC, 0.1 A, about 12,000 rpm
• Dual ball bearing
• 40 x 40 x 10 mm, 2-wire lead with a JST-XH 2.54 mm connector

Sold per fan. The A4T needs two. Shipped from the Netherlands.

Building an A4T? These are the two part cooling blowers from the A4T BOM. The A4T printed parts kit, A4T hardware kit, Delta 2510 hotend fan and NeoPixel LEDs are in the shop too.

A4T set: 5% off. Buy 2× this blower together with the A4T hardware kit and the Delta 2510 hotend fan and all four get 5% off, applied automatically in the cart.