Xol Toolhead Hardware Kit — Carriage and Toolhead

Details

Every screw, nut and small part for a complete Xol build — carriage and toolhead — in one bag, all A2 stainless so the whole build matches. Packed from the official Xol BOM, with a spare of the parts everyone drops on the floor.

Screws

• 16× M3x8 socket head (DIN 912)
• 6× M3x16 socket head
• 2× M3x20 socket head — for a Sherpa-Mini extruder
• 3× M3x6 button head (ISO 7380)
• 4× M2.5x16 — hotend fan
• 8× M2.5x8 — part cooling fans, XolPAP included
• 2× M2x10 self-tapping — X endstop

Nuts and washers

• 8× M3 hex nut
• 2× M3 washer (DIN 9021)

The rest

• 10× M3 heatset insert, Voron spec 5 × 4 mm
• 2× 3x30 dowel pin and 2× metal tube — belt mount
• 2× M3x20 standoff — toolhead board
• 2× cable tie and a length of PTFE tube

Works with any extruder: the M3x20 for a Sherpa-Mini and the M3x8 for everything else are both in the bag.

The Xol is designed by DW-Tas (github.com/Armchair-Heavy-Industries/Xol-Toolhead). 10% of every Xol kit I sell goes to him to support the project — printed parts and hardware alike.

Not included: fans, LEDs, hotend, extruder, toolhead board, rail and belts. Printed parts are a separate listing.

Made to order and packed by hand — allow 1 to 2 weeks.